Pusat pemesinan dengan 4 sumbu dan dua spindle

SW Schwäbische Werkzeugmaschinen BAW06-22

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 48.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2080233, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, CNC control system SIEMENS 840D Bdsdpsxt D Ebsfx Ah Uji Electrical connection Connection voltage: 3 × 400 V / 50 Hz (earthed) Network configuration: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fusing: 190 A gG (5 s) Weight Operational weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Working Area Spindle spacing: 600 mm Travel: X-axis: 600 mm Y-axis: 600 mm (optionally 875 mm) Z-axis: 500 mm Workpiece Clamping / Table System OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided toothing on the swivel carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5″ Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas),

Kondisi: bekas, Tahun pembuatan: 2007, Double spindle machining centre in 5-axis configuration (double-sided) Travel paths x/y/z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Bdodpfx Ajtgu Ixsh Usi Tool magazine: 2 x 72 tool positions Tool holder: HSK 63 CNC control: Siemens 840D 1 x Tool breakage monitoring 2 x Clamping bridge supports H75 mm 2 x Clamping bridges 5th axis Coolant unit: Knoll, 70 bar 1 x Chip conveyor KB1000 1 x Drilling head indexing 2 x Tool flatness monitoring systems 2 x Retrofit kits for torsion compensation A-/U-axis