Mati melihat pers HMG-ES

SXKH HMG-400ES-3020

Tahun pembuatan: 1999, Kondisi: baik (bekas), Plage de longueur de clous : 50 à 90 mm Vitesse : 100 clous/seconde (régulateur de fréquence) Commande : API Siemens S5 Giedjdmbp Uepfx Adtel

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Stroke: 0-500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Through-hole in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Gijdpfxecxxrro Adtol Approx. machine weight: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm.

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. Godpexddvnofx Adtjil 125 kg auxiliary crane on spindle housing.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Die Maschine ist in gutem Zustand, die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. X 1025 mm Gisdpfx Aewx N Nfsdtjl Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 U/min, HSK 63

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Gsdpfxor D N Eqo Adtjil 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I Gedsfgyicspfx Adtsil · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baik (bekas), Tahun pembuatan: 2009, panjang pemakanan sumbu X: 6.000 mm, panjang umpan sumbu Y: 3.000 mm, panjang umpan sumbu Z: 1.500 mm, model controller: HAIDENNAIN, panjang benda kerja (maks.): 6.000 mm, lebar benda kerja (maks.): 2.500 mm, lebar meja: 6.000 mm, panjang meja: 2.500 mm, Gantry milling machine with 5-axis head Gijdpfxevcqybo Adtol

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Giodpfx Adjcxxycetsl Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Wire diameter range: 1.8 - 5.0 mm Ring diameter: 80 - 600 mm Wire feed length: 0 - 10,000 mm Output: up to 30 rings/min Gjdpfof Tymbjx Adtoil Welding transformer: 10 kVA

Kondisi: baru, Working length 3000 mm Working width 360 mm Gsdpfsfv Attsx Adtoil Roller width 360 mm Roller diameter 60 mm Load capacity 900 kg Height adjustment 650 - 1100 mm Machine weight approx. 0.050 t Dimensions (L x W x H) 3.1 x 0.45 x 0.6 m 3m roller conveyor with manual length stop.