Mesin bubut CNC

TAKISAWA TS 30

Kondisi: bekas, CNC travelling column drilling and milling machine ANAYAK Type HVM-3800-P Bed-type milling machine, design similar to a floor plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 "Refurbished 2025" The machine will be overhauled in 2025 and can then be inspected in stock at 37235 Hessisch Lichtenau. Travel distances: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 slots, 22 mm, spacing 130 mm Table load: max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60–4000 rpm, infinitely variable Feed speed: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine Kfjdpfsxcgtgox Aahea - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal head, fully automatic swiveling in two 45° axes – B+C axis - HEIDENHAIN iTNC 530 control with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting - Free-standing control cabinet - Chip conveyor mounted between the travelling column bed and the machine table - 32,078 operating hours read - Coolant system - Free-standing hydraulic unit - Operating manual with wiring diagrams Footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Kondisi: bekas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] Kfjdpfjuhcbcsx Aahoa - Tank capacity: 260 [l] - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control - Cooling unit - Lubrication tank with pump - Automatic threading

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 760 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, berat benda kerja (maks.): 12.000 kg, tinggi total: 48.500 mm, panjang total: 85.800 mm, lebar total: 56.000 mm, lebar meja: 2.400 mm, panjang meja: 3.020 mm, berat keseluruhan: 20 kg, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 6.000 rpm, jarak dari tengah meja ke hidung spindel: 960 mm, hidung spindel: ISO 50, panjang alat: 350 mm, diameter alat: 127 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Portal-type vertical machining center "AWEA LP-3025" Kfedpfxerl Svrj Aahsa

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Make: NIKKEN Type: CNC-200, Year: 1990 Ksdogabu Uepfx Aahsfa with tailstock and base plate.

Tahun pembuatan: 2001, Kondisi: bekas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Kfsdpfx Aasdwf Dbshsa

Kondisi: baik (bekas), Tahun pembuatan: 2010, cnc-fanuc-robodrill-at21ifa-en Kfjdpfx Aaexflvfohja

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Pusat Pemesinan - Vertikal Produsen: Hyundai KIA Model: VX380TD Tahun Pembuatan: 2007 Unit Kontrol: Fanuc Seri 01-MC Kisaran kecepatan spindle: 12.000 rpm Daya terpasang: 7 kVA Tipe holder alat: BT30 Slot alat: 20 Kodpfoiw Ekdex Aahjfa Pergerakan sumbu X: 500 mm Pergerakan sumbu Y: 350 mm Pergerakan sumbu Z: 350 mm Berat: 5.000 kg

Tahun pembuatan: 1979, Kondisi: siap digunakan (bekas), Max. Schleifdurchmesser: 300 mm, Ksdpfx Aajhq Uigehsfa Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindeldurchmesser: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Kondisi: baik (bekas), Tahun pembuatan: 1987, jam operasional: 2.685 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 240 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 400 mm, panjang total: 5.235 mm, tinggi total: 3.045 mm, lebar total: 3.990 mm, kecepatan spindel (maks.): 640 rpm, kecepatan spindel (min.): 55 rpm, berat keseluruhan: 11.000 kg, Perlengkapan: dokumentasi / manual, Gear hobbing machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which underwent a general overhaul just a few years ago. Investments made: Kfodpfx Aew Dcx Rsahea - Overhaul including milling head (2021): approx. €70,000 - All hydraulic hoses replaced (2021): approx. €3,500 - New oil mist separator (2021): approx. €5,000 Many tools and clamping devices available, see pictures and attachments.

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Translation into English: Kfodpfxsvnd Suo Aahoa Travel range X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool stations: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-pallet changer for 630mm/630mm pallets. Documentation available. An on-site inspection is possible.