Mesin bubut spindel ganda CNC

Takisawa TT-500 GD

Kondisi: bekas, Tahun pembuatan: 2012, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, Traversing paths (X/Y/Z): 600 / 500 / 500 mm NC rotary table: 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Maximum load capacity: 400 kg, direct measuring systems including table cooling Dynamic package: Linear drives on X/Y axes Rapid traverse X/Y/Z: 80 m/min Acceleration X/Y/Z: 10 m/s² Active cooling for main spindle, linear drives, and table Control: Siemens 840D SL Operate Spindle: 20–24,000 rpm, HSK-A63 per DIN 69893 • Tool magazine: Chain-type tool magazine with 60 stations • Tool length measurement and breakage monitoring Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ) with paper filter, 40 bar, 231 l/min, 600 l tank, including rotating inspection window, linear system sealing air, bed flushing • Selectable air blast through spindle center via M function, conditioned air with minimal oil content • Electronic handwheel Lrjdeyc Tthepfx Adnsh • Spray gun for chip rinsing • Enhanced chip flushing • Laminated safety glass for workspace door and side window • Operating mode 4 • High speed settings • Blum HSK-A63 touch probe • Preparation for 3D QuickSet • Optionally, oil mist extraction system • New spindle at 25,800 spindle hours

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Ljded Nb A Njpfx Adnjrh Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 2012, Kondisi: diremajakan ulang (bekas), MAZAK laser cutting system STX510 MkIII 4kW ==EXCELLENT CONDITION – REFURBISHED IN 2023== Year of manufacture: 2012 Very well-maintained, refurbished MAZAK laser machine with 4000W Table size: 3000mm x 1500mm Minimal installation footprint: 2.9m x 7.3m Small part removal conveyor Lrodpfx Asnwmw Sedneh LAN/USB interface Automatic nozzle changer Automatic focus positioning Fast piercing for thick materials Plasma sensor for stainless steel cutting Piercing sensor for initial piercing Burning sensor for monitoring during mild steel cutting Fully enclosed machine cover No foundation required Mild steel: up to 22mm Stainless steel: up to 15mm Aluminium alloy: up to 10mm Plastic cutting possible Incl. software Incl. warranty Incl. extraction system Incl. commissioning & training ===Optionally available with fully automatic loading and unloading===

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S4E184001, diameter putar di atas sled silang: 430 mm, panjang pembubutan: 670 mm, diameter pembubutan: 220 mm, lubang spindel: 45 mm, kecepatan spindel (maks.): 6.300 rpm, berat keseluruhan: 4.300 kg, Mesin bubut CNC hard turning bekas dengan spindle tambahan Merek: EMCO Tipe: Emcoturn 45E Tahun pembuatan: 2018 Jam operasi rendah Lredpsw Rrvwofx Adneh Kontrol: Siemens 828D Jumlah alat: 12 unit berpengerak Kecepatan maks.: 0-6000 rpm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Space requirement: approx. 4 x 3 x 2.5 m Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Technical Data: Nominal workpiece diameter: 100 mm Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight: approx. 7,000 kg With robot cell Lsdpfx Adsv Ehbbonerh

Kondisi: baik (bekas), Tahun pembuatan: 2000, Manufacturer: KUKA Model: KR 350/2 Year of manufacture: 2000 Net weight: 1,870 kg Ljdpfx Adeh Dwr Usnerh Without cables and control cabinet. Addendum to the measuring report!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, tinggi total: 2.777 mm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 660 mm, berat keseluruhan: 1.265 kg, jumlah sumbu: 3, This 3-axis Hexagon GLOBAL CLASSIC was manufactured in 2019. This CMM unit is ideal for precision measurements and provides a reliable solution for improving quality control processes. Take advantage of the opportunity to purchase this Hexagon GLOBAL CLASSIC CMM unit. Contact us for more information. Additional Equipment • Compressed air supply: Minimum air pressure: 0.5 MPa / Maximum air consumption: 70 NI/min / Minimum supply pressure: 0.5 MPa (5 bar) / Minimum inlet flow rate (ANR) UNI ISO 8778: 7.5 dm³/s • Air quality: Maximum oil concentration in the air: 5 mg/m³ / Maximum particle size in compressed air: < 0.04 mm / Maximum concentration of solid particles in compressed air: 3(*) • Dynamic performance: 3D positioning speed: 510 mm/s / Maximum acceleration: 1700 mm/s² / Resolution: 0.039 µm Machine advantages Technical advantages of the machine • Maximum workpiece weight: 900 kg Main system: • Dell Precision Tower 5820 workstation • Pre-installed measurement software PC-DMIS 2019 Probe/Sensor system: • HP-S-X1S scanning sensor • Automatic probe changer HR-X1S with 6 slots Calibration and fixturing equipment: • Standard calibration artifact • Swift-Fix kit with silver baseplate (400 × 600 × 12 mm) Accessories (Standard probe set HP-S-X1S): • 1× probe Ø 1.5 mm, 20 mm length • 1× stylus Ø 3 mm, 20 mm length • 1× stylus Ø 5 mm, 20 mm length • 1× stylus Ø 3 mm, 50 mm length • 1× stylus Ø 5 mm, 50 mm length • 1× stylus Ø 5 mm, 100 mm length • 1× wrench • 2× spring pins • 1× storage case Dimensions Machine depth: 1277 mm Lredjx D Em Uepfx Adnjh

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Die Maschine kann nach Terminvereinbarung besichtigt werden. Lsdpeifi D Tofx Adnsrh Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár

Kondisi: bekas, Tahun pembuatan: 2013, Technical details: Turning diameter: 38 mm Item: CNC Lathe Manufacturer: Hanwha Model: STL38H Year of manufacture: 2013 Control system: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38mm; Spindle bore max. 42mm; Max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° resolution; Z1 travel: 320mm; Synchronised, moving guide bushing unit; Guide bushing type: JBS or SL38; Collet type: 173E / F48 Sub-spindle: Max. pick-off diameter: 38mm; Max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° resolution; Z2 travel: 320mm; Collet type: 171E / F42 Tool turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; Servo axes: X2, Y2, Z2; Travel [mm]: X2 = 115, Y2 = 100, Z2 = 120 Lrodpfx Adetv Sdfensh Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for more information and pictures via email(at) or

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, jam operasional: 20 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 200 mm, rentang pengukuran sumbu Y: 200 mm, rentang pengukuran sumbu Z: 200 mm, berat benda kerja (maks.): 15 kg, masa garansi: 12 bulan, jenis arus masuk: AC (pendingin udara), jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 200 mm, tegangan masuk: 230 V, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pencahayaan, 3D Coordinate Measuring Machine Mahr MS2VT Used multi-sensor CMM with motorized zoom and active vibration damping. Lrodpfxjdz Er Re Adneh Factory-refurbished premium multi-sensor measuring center with warranty and guarantee – rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or via forwarding agent, worldwide. Online or on-site demonstrations with customer parts available, application consulting provided by accredited Profitech metrology laboratories during project planning. Comprehensive service package: – Delivery, installation, commissioning, accuracy acceptance according to standard, certification, and comprehensive acceptance documentation. Customized training and courses also available as online sessions. Leasing, hire purchase or direct financing available through Profitech with no intermediary bank required. Measuring device can be configured to specific customer requirements. • Measuring range (single sensor): 200x200x200mm • Dimensions: 900x750x950mm • Weight: approx. 170kg • Accuracy: E2 = 2.4 + L/150 [μm] • Refitted in 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 evaluation software (12 months free software updates) Representative image from the manufacturer (sister device)