Mesin bor lubang dalam

TBT T30-1-750 Kreuztisch

Kondisi: baik (bekas), Tahun pembuatan: 2018, Detail teknis ditunjukkan pada gambar. Mesin dalam kondisi baik. Bagian yang ditunjuk dengan tangan tidak termasuk. Pgodpfx Aszrniusdcou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes Podpfx Asw T Tcwsdcogu All technical data provided without obligation and subject to errors or omissions.

Kondisi: baik (bekas), tinggi total: 2.500 mm, panjang total: 5.300 mm, lebar total: 2.500 mm, panjang pemakanan sumbu X: 1.550 mm, panjang umpan sumbu Y: 600 mm, tinggi penggerindaan: 800 mm, berat keseluruhan: 7.800 kg, GER RS 15/60 Surface Grinder Table size: 1500 x 600 mm Psdpjvli H Sefx Adcegu X-axis travel: 1550 mm Y-axis travel: 600 mm Maximum grinding height: 800 mm Grinding wheel size: 400 x 100 mm Automatic downfeed: Yes Dovetail accessory: Yes Coolant system: Yes Machine dimensions (W x L x H): 2500 x 5300 x 2500 mm Weight: 7800 kg

Kondisi: bekas, Module milling cutter Module 8 20 degrees Length 1800 mm Diameter 120 mm Bore 40 mm Pgjdpfedklt Nsx Adcju

Kondisi: baik (bekas), Tahun pembuatan: 1984, Max. wheel diameter: 250 mm Wheel width: 275 mm Module (max.): 6 Machine weight: approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all indexable cylindrical gears such as: - Straight and helical spur gears, worm wheels and worms, splined shafts, keyed shafts, broached profiles, chain and ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Pgsdpfov T Nqasx Adcou Technical data: - Max. workpiece diameter: 250 mm - Max. module: 6 mm - Max. axial feed travel: 275 mm - Max. tangential feed travel: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. cutter length: 170 mm - Min. clamping surface (table): 195 mm - Max. clamping surface (table): 470 mm Performance Cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net machine weight: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm as per table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. Pgjdpfxor A Hcbj Adcou • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Diameter pemotongan: 220 mm Rentang pemotongan pada sudut 90 derajat: persegi 220 x 220 mm Rentang kecepatan: 20 - 140 m/menit Panjang pita gergaji: 3720 x 34 x 1,1 mm Tinggi penyangga material: 825 mm Kapasitas cairan pendingin: 80,0 liter Panjang pengumpanan maksimum: 600 mm Pjdpfxexab R Us Adcegu Total kebutuhan daya: 2,5 / 3,5 kW Berat mesin: sekitar 1500 kg Dimensi P-L-T: 2350 x 2050 x 1500 mm - dalam kondisi teruji - video mesin - ?v=joc0EbemYC8 Perlengkapan: - gergaji pita elektro-hidraulik - OTOMATIS PENUH - untuk memotong profil berongga dan material padat dari baja, baja tahan karat, . baja perkakas, logam non-besi, dan plastik - panel kontrol di bagian depan kanan * termasuk tombol untuk pengoperasian manual (penyetelan/pemotongan tunggal) - sistem penegang material elektro-hidraulik - kecepatan pemotongan yang dapat disesuaikan secara bertahap .. 20-140 m/menit. - pengumpan potongan otomatis - penyetelan manual rentang pengumpanan material * dengan roda tangan termasuk tampilan nilai analog * panjang pengumpanan tunggal maksimum .. 600 mm * maksimum 7 kali pengulangan (pengumpanan tunggal) dimungkinkan + input jumlah potongan - penyetelan tinggi otomatis rangka gergaji * termasuk perangkat untuk deteksi material (awal pemotongan) - sistem cairan pendingin

Kondisi: baik (bekas), Manufacturer: STANKO Model: 7D430 Pjdpfxswpud As Adcsgu Year of Manufacture: 1994 Table rotation: 360° Head tilting capability up to 10° Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric | Imperial Table diameter: Ø 630 mm Table load capacity: 1,000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Throat depth: 500 mm Stroke range: 3 - 38 m/min Power: 12 kW Approximate Dimensions Length: 3,000 mm Width: 2,200 mm Height: 3,000 mm Weight: 6,150 kg Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.

Kondisi: perlu perbaikan (bekas), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 control X axis: 500 mm Y axis: 350 mm Z axis: 610 mm Motor spindle: 18,000 rpm Power: 10.2 kW Tool changer: 24 positions Weight: 3,200 kg With 4th axis Tool holders: SK 30 Pgjdpfxswmwrdo Adcsu Approximately 40 tool holders included The machine has the following issues: - The Heidenhain 430 control system is defective (booting is not always possible, system crashes occur during operation)

Kondisi: bekas, nomor mesin/kendaraan: 007848, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Podewkrqpspfx Adcegu Maximum feed speed: 20 m/min Maximum panel thickness: 60 mm Working units: 8 units