Mesin bor lubang dalam

Technidrill GD-100-5-160 BTA-Ejector-Gundrill

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Bedpey Hmfysfx Abveln Condition: As-new condition, only 5,290 operating hours.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 5.200 mm, diameter putar di atas sled silang: 940 mm, diameter pembubutan: 900 mm, lubang spindel: 204 mm, torsi: 3.000 Nm, saluran batang: 204 mm, tinggi total: 3.600 mm, panjang total: 10.820 mm, lebar total: 3.381 mm, lubang collet: 450 mm, hidung spindel: ASA 15, berat keseluruhan: 39.000 kg,

Kondisi: diremaj di bengkel (bekas), bsta-110h-vorschub-bbv-202-120 Bodjizi Hmjpfx Abvjln

Kondisi: hampir baru (bekas), Mesin Bor Lubang Dalam Ryazan Model PT295106 x 4000mm Produsen: Ryazan Model: PT295106 Tahun: 1985 Kondisi: Bekas Nomor Stok: 2850 Tinggi Titik Tengah: 550mm Bljdpsxzp Rljfx Abvon Kapasitas Bor Padat: 200mm Panjang Maks Bor: 4000mm Headstock Spindle Berongga: 500mm Kecepatan Spindle Headstock: 16-250 rpm Daya Penggerak Headstock: 50/75kw Panjang Bor Maks di depan Headstock: 3500mm Panjang Bor Maks dengan spindle berongga 500mm: 4000mm

Kondisi: baru, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). The machine is equipped with 12 to 16 axes; the 12 standard axes are listed below: - wire feed - wire rotation - nozzle rotation - one servo spinner - 8 independent slides (8 axes) Optional (up to 4 additional axes): - servo cutter Bjdpfx Absvbdq Reveln - additional servo spinners - lateral displacement of the coiling finger - transfer device for raising the second eyelet (German type) for tension springs. Maximum feed speed: 54 m/min. Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. Feel free to contact us with any further questions.

Tahun pembuatan: 1984, Kondisi: siap digunakan (bekas), A vertical CNC gear hobbing machine from Pfauter is available. Module min./max.: 1/3, max. workpiece diameter: 150mm, max. face width: 150mm, milling head swivel: +/-45°, distance cutter axis to table axes: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, spindle speed: 600 rpm, feed rate: 1500mm/min, tangential travel: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. Inspection on site is possible. Bedpfxjwkih Es Abvoln

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1974, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 817, Komplette Kaltstauchlinie (bestehend aus 3 Maschinen) Ein-Stempel-Zwei-Stationen-Kopiermaschine (Header) Max. Drahtabschneidedurchmesser: 25 mm Abschneidelänge: 300 mm Schaftlänge unterhalb des Kopfes: 260 mm Extrusionsmaschine Abgratmaschine Bedpetqu U Tjfx Abvjln

Kondisi: bekas, Tahun pembuatan: 2004, Full bore diameter: 200 mm Drilling depth / mm Number of spindles / Technical Data Power: 129 kW Control: Siemens NC control Stepless speed range: 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 liters Maximum flow rate: 1,500 l/min Swing diameter in steady rest: 1,100 mm Swing diameter over bed: 1,250 mm Distance between centers: 11,000 mm Chuck clamping diameter: up to 1,100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1,100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outside diameter: 406 mm Max. outside diameter: 850 mm Blsdpfx Asxgic Eobvjn Wall thickness: 10...150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. tensile strength: 800 N/mm² Specific cutting resistance (Ks): 2,000...2,100 N/mm² Machine data Machine length: 28,800 mm Center height: 560 mm Swing diameter over bed: 1,120 mm Full bore diameter: 200 mm Core drilling diameter: 350 mm Boring diameter without pilot drilling: 350 mm Boring diameter with pilot drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Power data at 1,000 min⁻¹: 113 kW / 1,079 Nm Power data at 1,150 min⁻¹: 129 kW / 1,017 Nm Main gearbox: Z-F shift gearbox Type: 2 K210 Shiftable gear ratios: i = 1:1 i = 1:4 Fixed gear stage headstock: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min⁻¹ Speed range II: 2...75 min⁻¹

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1986, jam operasional: 53.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 110 t, panjang langkah: 16 mm, berat keseluruhan: 24.600 kg, de_01 Bedpfxeuwlvqs Abveln

Kondisi: bekas, Tahun pembuatan: 1987, Max. rolling pressure NA t Workpiece diameter 38 mm Workpiece length 500 mm Total power requirement 24 kW Machine weight approx. 10 t Space requirement approx. ... m Max. stroke of the upper/lower tool slide 760 mm Max. rack length approx. 610 mm Workpiece length between centers approx. 500 mm Max. gear width/profile width 92 mm Blodpfjt Hw D Djx Abvon Max. workpiece diameter 38 mm Tailstock stroke on the boom (hydraulic) approx. 500 mm Module range min./max. 0.3 to 1.3 module Total drive approx. 24 kW - 380 V - 50 Hz Total weight approx. 10,000 kg Accessories / Special equipment: - KBH workpiece feeder installed parallel to the machine, currently configured for the loading and unloading of shaft-type workpieces approx. 16 mm Ø x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the area of the chucks, including workpiece position monitoring device. - Originally used for rolling the external gearing (Zz = 25) of so-called planet carriers (automotive), approx. 32 mm Ø x 14 mm long, workpiece Ø approx. 80 mm x 80 mm long. - Various accessories, separate control cabinet, separate 900 L hydraulic unit, coolant system integrated in the machine, control panel with plain-text fault diagnostics, etc. ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more cost-effective than hobbing. Workpieces are clamped between centers and profiled by synchronously counter-moving rack tools. The material is displaced and formed by the increasing profile height within the rack tool. Profile and surface quality are optimized in the calibration zone of the tool. No run-out – as is necessary with hobbing or shaping – is required. The machine features an extremely robust design. Tool life can reach 25,000 to 100,000 parts, even for helical gears. Condition: Very good – assembled in our warehouse and ready for demonstration Delivery: Ex-stock – as inspected Payment: Strictly net – after receipt of invoice We thank you for your order. Further cold rolling machines and other gear production machines permanently available.