Pemadat sampah

Thetford International T3

Tahun pembuatan: 2025, Kondisi: baru, The autonomous RS1 containers and the modular RS2 containers of the CompoFlow system represent the most innovative solutions for the biological treatment of organic waste. Kdedpfjikq Eyjx Aayew Designed for mobile and decentralized collection of biowaste (RS1), as well as for stationary operation at composting facilities (RS2). Ideally suited to ensure a controlled process of composting, biological drying, and biostabilization, as well as efficient logistics for organic waste handling. Each composting system is developed according to the customer’s specific requirements. After analyzing the material intended for processing, we determine the required number of containers and the necessary capacity of the composting plant. Manufactured in Poland – Eco-friendly – Durable – Certified – EU-compliant Composting significantly increases recycling rates. RS TEAMTECH Sp. z o.o.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 500 kg, berat keseluruhan: 17.000 kg, kapasitas tangki oli: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Pressing force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific pressing force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 22 kW Total installed power: 65 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³ approx. 5.5 t/h - 50 kg/m³ approx. 7.5 t/h - 100 kg/m³ approx. 9.7 t/h Bale weights with a bale length of approx. 1.2 m: up to 500 kg (material dependent) PLC control: Siemens S7-1500 Operator panel: Schneider Harmony Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Kodpfsu Thbxjx Aayedw Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for processing loose bulk materials of small grain size - OptiCut XS system for reduced cutting force and increased throughput - Special press ram for compacting "difficult" materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive power: 4.0 kW Belt speed: approx. 0.3 m/s Feed belt length: 2,679 mm Inclined belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height (inclined belt): 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN quality N) Total height: 4,515 mm Transport dimensions (overall): 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling line: The entire plant is in very good condition due to its low operating time of only 1,851 pump hours and processing exclusively paper, cardboard, and film. Scope of delivery: - Avermann baler, model AVOS 1410 BS-22/50, incl. wire threading stations and bale chute - Avermann conveyor, model KGF GB 1500 - BOREMA personnel protection system, model APSS iBOR 22 Remarks: Complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Tahun pembuatan: 1983, Kondisi: baik (bekas), nomor mesin/kendaraan: 2103, Max. collet bore: 1 - 20 mm Ø Max. radius to be ground: 20 mm Kjdpjdnfz Njfx Aayjdw Cup wheel diameter: 100 mm Cup wheel speed: approx. 4,500 rpm Drive motor: 380 V, 0.25 kW Required space: 600 x 450 x 1,380 mm

Tahun pembuatan: 2011, Kondisi: diremaj di bengkel (bekas), Boschert EASY SHARP Tool Grinding Machine Configured for TRUMPF Tool System (AMADA system optional) Machine for punch tool maintenance with a cooling system and particularly powerful motor, making it suitable for use with diamond grinding wheels as well. Used machine – currently being overhauled Equipment for TRUMPF tool system up to size III Accessories: - Tool holder for flat and Whisper punches - Die holders for sizes I, II, and III - New corundum grinding wheel - Dressing diamond - Overhauled cooling system and machine base Technical data: - Grinding wheel diameter: 175 mm - Height adjustment: 150 mm - Working area: 400 x 150 mm - Motor power: 2.2 kW - Motor speed: 2825 rpm Kdsdpeid I T Iefx Aayjw Optional: Adapter for Amada system available Pictures similar

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control – Machine foot raising by 200 mm Kjdpfxou Thypj Aayedw Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.

Kondisi: bekas, Three-axle truck trailer, low-bed trailer MÜLLER MITTELTAL Type AZP Curtain side low-loader, low-bed trailer, trailer for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Permissible gross weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Kdsdpfot N Antsx Aayew Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors, level with the side wall - Curtain frame with EDSCHA roof system - Curtain frame is easily detachable (can also be used with removed frame and advanced curtain) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Centre axle is a lift axle - Drawbar extendable in several stages - Very robust lashing rings in the outer frame and in the vehicle centre - Aluminium loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased new by us, is first hand, registered and in use. Very good condition.

Tahun pembuatan: 2011, Kondisi: diremaj di bengkel (bekas), 2401 1 used double-piston screen changer – backflush type Manufacturer: ECON Model: ESK 480-4B Year of manufacture: 2011 Screen Block 1: 2 pistons, each with 2x Ø 123.5 mm Screen Block 2: 2 pistons, each with 2x Ø 176.3 mm, with screen area 490 cm² Includes: Hydraulic unit, Siemens control system Kdsdpfxogbfwmo Aayew The screen changer is ready for demonstration; viewing by appointment at short notice. Additional screen changers / melt filters available ex stock Wuppertal: - EREMA RS and laser filter - Kreyenborg K-SWE / RS - Ettlinger ECO - BD Plast - Alphatec - Gneuss - Brit-Ass

Tahun pembuatan: 2009, Kondisi: hampir baru (bekas), Presse mit Behälter Motorleistung 5,5 kW Kjdpfx Aefhb Tijayedw 400 V

Tahun pembuatan: 2024, Kondisi: baru, ‼️SPECIAL OFFER‼️IN STOCK NOW IN HEILBRONN! Only while supplies last! Kedpfx Aep E Ehqeaysdw ‼️IMMEDIATELY AVAILABLE‼️IN STOCK‼️ Powerful, robust machine at an attractive price from Josan & Söhne Small Alligator Shear: ➡️3 kW motor ➡️7 to 8 strokes per minute ➡️Dimensions: 1100 x 980 x 800 mm ➡️Weight: approx. 275 kg ➡️Jaw opening: 15 cm ➡️Blades can be reversed once they become dull, allowing for extended usage ➡️Health and Safety Regulations (UVV) implemented by a German company Net price: €3,999.00 +19% VAT: €759.81 Gross price: €4,758.81 Large Alligator Shear: ➡️7.5 kW motor ➡️Jaw opening: 30 cm ➡️7 to 8 strokes per minute ➡️Dimensions: 249 x 109 x 174 cm ➡️Weight: approx. 1,500 kg ➡️Blades can be reversed once they become dull, allowing for extended usage ➡️630 kN force ➡️Hydraulic pressure: 21 MPa ➡️Health and Safety Regulations (UVV) implemented by a German company PRICE ON REQUEST Images/Equipment may vary. Subject to errors and changes.

Tahun pembuatan: 2025, Kondisi: baru, RS-9 was specifically designed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine being operated. The shredder allows fast and safe shredding of paper, which is taken directly from the die-cutting machine, to enable easy transport to the baler via a conveyor system. The RS-9 shredder is designed for shredding waste from a die-cutting machine for easy transport via a belt conveyor system. Our shredder is very easy to operate. It features Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 offers the ability to retract the shafts, which ensures operator safety and extends the device’s service life. The machine is equipped with a frequency inverter enabling soft start and motor operation control. Kdodpfx Aoiklxboayew Feel free to contact us.