Unit hidrolik untuk lift

Thyssen-M.A.N. 11,1 kW

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Psdpfx Adeg Ezarjiepw Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Truxor amphibious vehicle suction dredger with pump, cutter and grabber for removing sludge, sediment, or aquatic vegetation. The Truxor DM 5045 is an amphibious tool carrier specifically designed for operation in bodies of water, wetlands, and shoreline areas. Engine: Kubota V1305, liquid-cooled, 4-cylinder, water-cooled turbo diesel Ppsdpoyn Hpaefx Adijw Emission standard: EURO 3 33 kW / 44.9 hp / 3000 rpm Coolant volume: approx. 8 l Electrics: Generator 12V, 40A. Battery: 45 AH. Work lighting. Fuel: 35 l tank, consumption min. approx. 3.8 l/h, average approx. 4.5 l/h Hydraulic system: Demand-controlled with dynamic adjustment, max. 140 l/min Tank volume 19 l + system approx. 36 l Joystick operation: Controls for vehicle movement, lifting, tilting, and weight distribution. Cab: Foldable canopy, adjustable driver seat, instrument panel. Speed: 0–100 m/min (without attachments) Front linkage: Lifting capacity 250 kg Quick-change device for attachments, tilting function. Saltwater-resistant aluminium and galvanized steel frame. Length: 4700 mm (with lift arm 5000 mm), width: 2060 mm, max. height 2.59 m, min. 1.9 m Weight: 1400 kg (vehicle only), additional component weight applies. Truxor available from stock in Gladbeck, without trailer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 28.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, manufactured by KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, immediately operational, and has low operating hours. It features an electronic injection and dosing unit, along with a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Pedeu Hxm Uspfx Adijpw Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2*50 mm additionally) Core pull: 1*Hydraulic Needle shut-off: Pneumatic Tie bar extension: 160 mm Cavity pressure sensor Selector valve Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery Buying & Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 9.300 h, kapasitas angkut: 3.500 kg, tinggi angkat: 4.700 mm, pengangkatan bebas: 1.500 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.200 mm, tipe perpindahan gigi: otomatis, tegangan baterai: 80 V, berat baterai: 1.580 kg, panjang garpu: 1.150 mm, kondisi ban: 95 persen, Tipe ban depan: ban superelastis (hitam), tipe ban belakang: ban superelastis (hitam), berat kosong: 6.400 kg, tinggi total: 2.200 mm, Perlengkapan: garpu palet, geser samping, kabin, kopling trailer, pencahayaan, riwayat servis lengkap, Dijual forklift listrik Toyota bekas tipe 8FBMT 35 tahun pembuatan 2018 dengan tiang Triplex free lift! Tinggi konstruksi: 2,2m Tinggi angkat: 4,7m Kapasitas angkat: 3500kg Ban full karet 95% Side shifter hidraulik Panjang fork 115cm Termasuk charger Ppsdpfoxzr E Eex Adijw Pada forklift sudah dilakukan overhaul pada dua motor penggerak dan as roda belakang, serta baterai juga sudah diganti baru! Forklift tersedia segera! Forklift siap langsung digunakan! Forklift dapat dilihat dan diuji coba di tempat kami! Transportasi dapat diatur sesuai permintaan!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Clamping force: 25 tons Version: with shuttle table Opening force/stroke min.-max.: 100/225 mm Mold height variable min.-max.: 122-222 mm Shuttle table stroke: 500 mm Max. weight on shuttle table: 120 kg Ejector force/stroke max.: 16/40 kN/mm Screw diameter: 22 mm Ppodpfx Adjvl Skajisw Usable screw length L/D: 20 Max. screw stroke: 90 mm Shot volume: 34 cm³ Shot weight: 31 g Injection pressure: 2000 bar Operating hours: 7397 h

Tahun pembuatan: 1991, jam operasional: 32.000 h, Kondisi: diremajakan ulang (bekas), • Ein Paar originale WEBER-Schnecken (ausgezeichneter Zustand, inklusive Messprotokoll) • Ein Paar nicht-originale Schnecken • Getriebe durch WEBER geprüft und teilüberholt Pedowaxuaspfx Adijpw • Steuerung auf WPS-Steuerung aufgerüstet • Ausstoß bei PVC ca. 700 kg/Stunde

Tahun pembuatan: 1989, jam operasional: 24.048 h, Kondisi: baik (bekas), nomor mesin/kendaraan: DS 85 777, Herkunft Hans Weber Maschinenfabrik GmbH Typ DS 8.7 Seriennummer DS 85 777 Ausführung Doppelschnecke Baujahr 1989 Betriebsstunden 24.048 Std. Schneckendurchmesser 87 mm Ppsdpfxovuzqzs Adiow Anschlussleistung 90 kW

Kondisi: bekas, Tahun pembuatan: 2006, Anlage: Used amphibious suction dredger, amphibious vehicle for water & land Type: Conver C 580 H amphibious boat Year of manufacture: 2006 Application: The machine is specifically designed for combined use on water and land, making it ideal for desludging, cleaning, and dredging works in bodies of water as well as in difficult-to-access wet areas. - Desludging of lakes, ponds, and canals - Operations in harbors and shoreline zones - Suction of sludge, sediments, and sand - Maintenance and cleaning of waterways - Municipal and industrial applications Serial number: 501 Operating weight: approx. 2,750 kg Draft: approx. 0.85 m Freeboard: approx. 0.50 m Ground clearance: approx. 0.30 m Speed: approx. 7 km/h (water) / up to 15 km/h (land) Dimensions: L (transport) approx. 3.60 m, W approx. 1.80 m, H approx. 1.10 m (+ crawlers) Working dimensions: L approx. 4.20 m, W approx. 2.60 m, H variably min. approx. 1.50 m Drive and engine: Hatz diesel engine Power: 48 kW (65 HP) at 2,300 rpm, air-cooled Water drive: 2 hydraulically driven propellers (twin screw) Land drive: 6 wheel motors (Danfoss), 6 wheels, additional rubber track for challenging terrain Hydraulic system: 2 x Sauer pumps (each max. approx. 120 l/min.), Danfoss proportional valves, additional VCD valves for various functions Hydraulic tank: approx. 200 liters Equipment: Heavy-duty boom (2-piece 1.50+) Aluminum pontoons: hydraulically adjustable, extra wide Pontoon adjustment: hydraulic Mowing attachment: double (incl. blade and chain) Mowing material collection frame: approx. 2.00 m with spring tines Ppedpey Dz H Tofx Adiow Sludge push blade: hydraulically adjustable Sludge dredge pump: incl. spray nozzle Support legs: hydraulically adjustable for dredging operations Comfort seat: rotatable Steering wheel: adjustable Dashboard: with display instruments Pump technology: Speed approx. 1600 rpm, pump pressure: approx. 30 mwc, capacity: 44-74 kW Special features: Fully functional amphibious vehicle for water & land, compliant with public waterway regulations, eco-friendly design, highly versatile. Condition: Used, operational, age- and use-related wear present Inspection: by appointment only Miscellaneous: Errors, modifications, and intermediate sale reserved.

Tahun pembuatan: 2000, Kondisi: baik (bekas), For Sale: Dekapack Horizontal Flow Wrapper + Infeed Conveyor Model: S4 - 35 / 2 Control System: Siemens S7 Documentation & electrical diagrams available. The machine is complete. Everything included as shown in the photos. Transport by arrangement. Price: €5,000 EXW If you have any questions or comments, please don’t hesitate to contact us! Ppedowtq I Espfx Adijw Kind regards, Leo Holland

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, schliesskraft-25-tonnen Ppedpfsyfg D Sex Adiow