Mesin injection molding vertikal dengan meja geser Arburg 275 V 250-70 tahun 2018

Arburg 275 V 250-70 Schiebetisch

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Clamping force: 25 tons Version: with shuttle table Opening force/stroke min.-max.: 100/225 mm Mold height variable min.-max.: 122-222 mm Shuttle table stroke: 500 mm Max. weight on shuttle table: 120 kg Ejector force/stroke max.: 16/40 kN/mm Screw diameter: 22 mm Usable screw length L/D: 20 Max. screw stroke: 90 mm Shot volume: 34 cm³ Shot weight: 31 g Injection pressure: 2000 bar Dedpfsvl Skaox Ac Tsci Operating hours: 7397 h

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg Dsdpfx Aeg Ezarjc Tjci EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: baru, Pressure: 40 t Outreach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Dcodpeb U Hwmefx Ac Tei Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 28.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, manufactured by KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, immediately operational, and has low operating hours. It features an electronic injection and dosing unit, along with a hydraulic clamping unit. Dcedpfx Aju Hxm Uoc Tsi Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2*50 mm additionally) Core pull: 1*Hydraulic Needle shut-off: Pneumatic Tie bar extension: 160 mm Cavity pressure sensor Selector valve Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery Buying & Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 9.300 h, kapasitas angkut: 3.500 kg, tinggi angkat: 4.700 mm, pengangkatan bebas: 1.500 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.200 mm, tipe perpindahan gigi: otomatis, tegangan baterai: 80 V, berat baterai: 1.580 kg, panjang garpu: 1.150 mm, kondisi ban: 95 persen, Tipe ban depan: ban superelastis (hitam), tipe ban belakang: ban superelastis (hitam), berat kosong: 6.400 kg, tinggi total: 2.200 mm, Perlengkapan: garpu palet, geser samping, kabin, kopling trailer, pencahayaan, riwayat servis lengkap, Dijual forklift listrik Toyota bekas tipe 8FBMT 35 tahun pembuatan 2018 dengan tiang Triplex free lift! Tinggi konstruksi: 2,2m Tinggi angkat: 4,7m Kapasitas angkat: 3500kg Ban full karet 95% Dedpfx Asxzr E Esc Tjci Side shifter hidraulik Panjang fork 115cm Termasuk charger Pada forklift sudah dilakukan overhaul pada dua motor penggerak dan as roda belakang, serta baterai juga sudah diganti baru! Forklift tersedia segera! Forklift siap langsung digunakan! Forklift dapat dilihat dan diuji coba di tempat kami! Transportasi dapat diatur sesuai permintaan!

Kondisi: sangat baik (bekas), Jaw width: 160 mm Jaw height: 50 mm Clamping range: 310 mm Total height: 170 mm Dcedpjd Hyfwofx Ac Tji

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 2.574 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Roboter 1073651 / Steuerung 3100062 / Lineareinheit 152938, kapasitas angkut: 210 kg, EN Dsdpfxey Ntv Ro Ac Teci The KUKA KR 210 R2700-2 (QUANTEC-2) industrial robot system includes a 6-axis robot with a payload of 210 kg and a reach of 2701 mm, combined with a KR C4 controller and a KL 4000 linear unit with a length of 12.50 m. The condition is used / as good as new with 2574.03 operating hours. The system was manufactured between 2021 and 2022 and is designed for applications such as handling, welding, gluing, assembly, and large-scale automation. Equipped with software options such as SafeOperation, GlueTech, ExpertTech, and Profinet MS, with power supply 3x 400V / 25A.

Tahun pembuatan: 1989, jam operasional: 24.048 h, Kondisi: baik (bekas), nomor mesin/kendaraan: DS 85 777, Herkunft Hans Weber Maschinenfabrik GmbH Typ DS 8.7 Seriennummer DS 85 777 Ausführung Doppelschnecke Djdpovuzqzjfx Ac Tsci Baujahr 1989 Betriebsstunden 24.048 Std. Schneckendurchmesser 87 mm Anschlussleistung 90 kW

Kondisi: baik (bekas), Manufacturer: Millutensil Model: BV 25 PM Year of manufacture: 1987 Closing force: up to 18,000 kg Opening force: up to 15,000 kg Powered table infeed and outfeed Upper platen rotation: 270° Upper platen size: 900 x 550 mm Specifications Metric | US Standard Distance between uprights: 930 mm Installation height: 760 mm Table dimensions: 755 x 755 mm Dsdorr Ui Ropfx Ac Tsci Ram stroke: 600 mm Approach speed: 1,000 mm/min Working speed: 1,000 mm/min Return speed: 1,000 mm/min Table rotation: 360°/min Approximate Dimensions Length: 1,350 mm Width: 1,350 mm Height: 2,000 mm Weight: 1,500 kg

Kondisi: bekas, Tahun pembuatan: 1991, Table length: 1500 mm Table width: 1000 mm Passage: 800 mm Measuring range X = 1400 mm Measuring range Y = 1000 mm Measuring range Z = 800 mm Machine weight approx.: 1.6 t Required space approx.: 2.0 x 1.8 x 2.1 m Dcodjcxxwuepfx Ac Tei 3D coordinate measuring machine, precision-planed measuring plate made of cast iron with T-slots, Zett-Mess evaluation computer, EPSON evaluation printer with temperature stabilization heating, suitable for TV transmission of microscope images, cold light source with 2 flexible light guides, Sony Mavica video printer, good condition