Mesin deburring lembaran logam

Timesavers Serie 22 WRBW

Kondisi: baru, Timesavers Series 12 WW The machine is equipped with two abrasive belt stations, allowing for pre-grinding with station 1 to remove raised burrs and splashes, and applying a surface finish with station 2. The conveyor belt transport speed is infinitely variable. The table opening can be adjusted from 0.8 to 100 mm. Fpsdpfx Aewqf U Uohuof

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Fsdpfxet Hw Iij Ahuepf Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baru, Tahun pembuatan: 2025, -TFON Kantenverrundungs- und Oberflächenreinigungssystem. -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl. -Arbeitsdickenbereich: Verarbeitet Materialstärken von 0 bis 120 mm. -Kantenverrundung: Erzeugt eine Radius-2-Verundung für glatte, sichere Kanten, die sowohl das Erscheinungsbild als auch die Funktionalität des Werkstücks verbessern. -Präzisionssteuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und gleichmäßige Steuerung während des gesamten Prozesses. Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Anwendungen, sodass verschiedene Arbeitsgänge parallel oder nacheinander durchgeführt werden können. Tischoptionen: Verfügbare Arbeitstischgrößen: 650 mm, 1000 mm oder 1300 mm – passend für individuelle Produktionsanforderungen. Tischtypen: Flexible Konfigurationen einschließlich Magnet-, Vakuum- oder Magnet-Vakuumtisch gewährleisten sicheren Halt verschiedenster Materialien und Werkstückgrößen. Plasma- und Sauerstofftechnologie: Setzt fortschrittliche Plasma- und Sauerstoffverfahren ein, um starke Grate und Schlacke nach dem Schneiden effektiv zu entfernen und besonders saubere, glatte Oberflächen zu erzielen. Oberflächenreinigung: Entfernt effizient Oberflächenverunreinigungen wie Rost, Oxid und Zunder und bereitet Werkstücke optimal für die Weiterbearbeitung vor. Kantenverrundung für Beschichtung: Bereitet Teile perfekt für Lackierungen und Beschichtungen vor, indem eine gleichmäßige und fehlerfreie Oberfläche sichergestellt wird. Einsatzbereiche: Ideal für Stahl-Service-Center, Energietechnik, Bergbau, Bauwesen und Automobilindustrie – maßgeschneiderte Lösungen für schwere Anwendungen. Fedohq A T Uopfx Ahuopf Gleichmäßige Ergebnisse: Sechs Lamellenräder arbeiten synchron und erzeugen an jedem Bauteil stets eine gleichbleibende, einheitliche Radiuskante. Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder durch reduzierte Abnutzung und sorgt für dauerhaft konstante Leistung.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, mold carriers: 42, mixing positions for additive mixing: 10, mixing head type: MQ, max. operating pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Full documentation is available. An on-site inspection is possible. Fodpfjttbd Njx Ahuspf

Kondisi: bekas, Mesin Frais Universal Merek: OPTIMUM Model: MT 100 Tahun produksi: 2018 – telah dicek bengkel No. mesin: J33021808035 Pemeriksaan geometris dengan protokol pengujian Fpsdpew Rlvqjfx Ahuof Perlengkapan: - Layar digital 3-sumbu DPA 2000 - Kepala frais vertikal SK 40 dengan ulir pengikat M 16 - Meja tetap 1.120 x 260 mm (alur-T: 14 mm) - Lampu mesin - Perangkat pendingin cairan - Pelumasan sentralis manual - Buku petunjuk pengoperasian Bekas, dijual apa adanya, tanpa garansi Mesin secara teknis sesuai dengan standar tahun produksinya.

Kondisi: bekas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. With its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1150–1350 mm Maximum part weight: 500 kg Wide-belt with abrasive belt length: 2620 mm Standard with vacuum holding system, optionally with magnetic holding system. Fedpfx Ahsnah Tdjuepf By using abrasive belts with a length of 2620 mm, you achieve a consistently smooth surface and reduce consumable costs, since these belts have a longer service life. Due to the modular design of these machines, it is possible to offer the optimal configuration for the customer’s specific processing requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing applications. Please contact us for further information and photos via mail(at) or

Kondisi: baru, Tahun pembuatan: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Hanging rod for parts * Convection (uniform temperatures throughout the oven) * Safety locks for secure opening and closing * Maximum operating temperature: 230 °C TQ0906 Powder Coating Booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3200 m³/h * Hermetically sealed lamp: 1 piece * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for dispatch. CHOOSE BUMEX SP. Z O.O. - Very high quality of the machines offered on the market. - Professional advice and service. - Warranty. - Warranty and post-warranty service. - Complete technical documentation. - 100% customer satisfaction. Fpsdpfxjfgnytj Ahujf - All BUMEX SP. Z O.O. products have a WE Certificate. We offer our own transport – prices are arranged individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions. Please do not hesitate to contact us.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, lebar kerja: 1.525 mm, ketebalan lembaran (maks.): 100 mm, berat keseluruhan: 6.400 kg, de-01 Fpodpoxw Ih Uefx Ahuof

Kondisi: baru, Tahun pembuatan: 2025, panjang total: 1.450 mm, lebar total: 800 mm, tinggi total: 1.800 mm, berat keseluruhan: 500 kg, daya: 4,75 kW (6,46 hp), FC 120 ZK Working capacity Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Fedst D D Nzopfx Ahuepf Brush band dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush band speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Power consumption: 12A, Extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Kondisi: baik (bekas), Tahun pembuatan: 1995, Universal tool milling machine Deckel FP 1 – several machines available (see photos) Model: FP 1 3-axis digital readout (Heidenhain) Price: from €9,500 excl. VAT Technical data: X travel: 300 mm Fodjtdcfhopfx Ahuspf Y travel: 150 mm Z travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range – vertical: 250 – 2,000 rpm Spindle speed range – horizontal: 40 – 315 rpm Spindle speed steps (working spindle): 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/weight: 1235 x 1160 x 1800 mm / approx. 800 kg