Mesin bubut vertikal cnc

TITAN SC 32 ( SAMU )

Kondisi: bekas, Tahun pembuatan: 1997, Technische-Details-2024-06-10 Gsdpfxsx Aq Ego Aa Deud

Kondisi: baik (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.460 mm, panjang meja: 3.800 mm, lebar meja: 1.000 mm, beban meja: 30.000 kg, Chip conveyor Double doors at the front Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant unit (IKZ) 16 bar and 2.2 kW, delivery rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first-owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Maximum table load: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: 50 ISO/Bt/Mk X-axis feed rate: 10,000 mm/min Y-axis feed rate: 10,000 mm/min Godpsxc Hh Dsfx Aa Dsud Z-axis feed rate: 10,000 mm/min Milling head auto-index: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, these details do not constitute a representation or contractual terms. We recommend that you verify all important details yourself.

Tahun pembuatan: 1998, Kondisi: baik (bekas), Hersteller: UNION Modell: Ti 1800 Baujahr: 1998 Gjdpfx Aaokwcdbj Doud Technische Spezifikationen Tischlänge: 2000 mm Tischbreite: 1800 mm Maximale Tischbelastung: 16.000 kg Vorschub in der V-Achse: 1250 mm Drehbereich B-Achse: 360.000° Maximale Drehgeschwindigkeit B-Achse: 1,35 U/min Verfahrgeschwindigkeit V-Achse: 4000 mm/min Abmessungen (ca.): Länge: 3400 mm Breite: 2000 mm Höhe: 920 mm Gewicht: 6500 kg Bitte beachten Sie: Die obenstehenden Angaben wurden nach bestem Wissen und Gewissen von uns sowie, soweit möglich, vom Hersteller zusammengetragen. Die Angaben erfolgen in gutem Glauben, ihre Richtigkeit kann jedoch nicht garantiert werden. Sie stellen daher keine zugesicherten Eigenschaften oder vertraglichen Zusicherungen dar. Wir empfehlen, alle wichtigen Details eigenständig zu überprüfen.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, hurco-vmx30-specs-de Gsdpfjx D Ikpox Aa Dsud

Kondisi: bekas, Tahun pembuatan: 1995, x-axis travel 1200 mm y-axis travel 600 mm z-axis travel 600 mm Table size 1300 x 600 mm Max. workpiece weight 2000 kg Spindle taper ISO 50 Spindle speeds, stepless 30 - 3500 rpm Feed rates, stepless 1 - 6000 mm/min Rapid traverse 10 m/min Milling spindle drive power 18 kW Spindle torque 500 Nm Distance spindle/clamping surface max. 267 - 867 mm Gujdpevw Duhofx Aa Dsd Distance table/vertical head 58 - 658 mm Voltage 380 V / 50 Hz Control voltage 230 V Total power requirement 22 kW Machine weight approx. 6.5 t Dimensions 3.6 x 4.2 x 2.3 m CNC control DR. HEIDENHAIN TNC 360 Hydraulic tool clamping device Electronic handwheel Manually swivelling vertical head Coolant system,

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: X-axis travel: 2500 mm Y-axis travel: 1000 mm Z-axis travel: 750 mm Table size: 3220 x 1000 mm Max. workpiece weight: approx. 3000 kg Spindle taper: ISO 50 Spindle speed range: 20 – 5,000 rpm Feed rate: 1 – 30,000 mm/min Rapid traverse: 30 m/min Gujdpjvptmwofx Aa Dod Total power requirement: 40 kW Floor space required (approx.): 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with CNC control HEIDENHAIN TNC 426 30-station automatic tool changer RENISHAW touch probe Coolant system with internal coolant supply (IKZ) and chip conveyor Various tool holders

Kondisi: bekas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine no. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Nominal arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Arm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Power supply: 380 Volt, 50 Hz, 15 kW - Clockwise/counterclockwise rotation of the drilling spindle via hand lever switch - Hydraulic gear shifting for spindle speed and feed rate - Hydro-mechanical central clamping Guodpfx Aslhwr Rea Dsd - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition

Tahun pembuatan: 1980, Kondisi: baik (bekas), A very well-maintained, used cycle-controlled lathe from Weisser Heilbronn with SIEMENS control. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Gsdpfx Ajgyy I Aja Djud Travel, X-axis: 350 mm Travel, Z-axis: 1850 mm Spindle nose: DIN 55022, size 8 Number of spindle speeds: 18, 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible torque at spindle: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Multifix quick-change toolpost in front of the centre, size 'C' 4-position turret behind the centre Tool holder Coolant system Travelling steady, pneumatically operated Technical data and dimensions subject to change. A video conference via WhatsApp is possible by appointment.

Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 550-235-ELD, GENERAL FEATURES Maximum rolling diameter 41 mm Maximum/minimum module range 1.5 / 0.39 Maximum rolling width 92 mm Gusdpfxjd Nw Tte Aa Ded Maximum tool slide stroke 760 mm Maximum rack length 610 mm Maximum/minimum diametral pitch 20/40 - 32/64 Manufacturing No. 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power 15 HP

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.000 mm, diameter pembubutan di atas alas geser: 710 mm, panjang pembubutan: 8.000 mm, Used heavy-duty lathe with comprehensive steady rest equipment – Ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm has been specially designed for pipe machining applications. Thanks to its well-thought-out machine concept, the cutting tool can easily pass by the open steady rests – perfect for precise processing of long, hollow workpieces. Technical highlights: • Swing over bed: 1,000 mm • Swing over cross slide: 710 mm • Centre height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency inverter, steplessly adjustable Design advantages: • One-piece cast machine bed, artificially aged – for maximum stability and stress relief • 5 hardened and ground guideways for highest precision • Stepless feed adjustment of the longitudinal axis via ballscrew – no Norton or apron gearbox • Electrically operated tailstock with hydraulic clamping • Manually adjustable cross slide with trapezoidal leadscrew • 4-position tool post, manually rotatable • Triple guided compound slide – for exceptionally smooth operation Steady rests & pipe machining: Gujdov Tnttspfx Aa Dod • Various steady rests (fixed and travelling) optionally available • Motor-driven steady rest carriers with hydraulic clamping • Quill adjustment conveniently accessible from the operator side • Travelling steady rests mountable on the left or right as required Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise processing of pipes. The stepless speed and feed regulation provide high flexibility and user comfort.