TORNOS DECO 2000-10
TORNOS DECO 2000-10

Name: TORNOS DECO 2000-10
Brand: TORNOS
Availability: InStock

Tahun pembuatan

1999

Kondisi

Bekas

Lokasi

Jerman

Tampilkan peta

Data mesin

Nama mesin:: TORNOS DECO 2000-10

Pabrikan:: TORNOS

Model:: DECO 2000-10

Tahun pembuatan:: 1999

Kondisi:: siap digunakan (bekas)

Harga & Lokasi

Lokasi:: , Jerman

Hubungi

Rincian teknis

Diameter batang (maks.):: 10 mm

Jumlah sumbu:: 9

Rincian penawaran

ID iklan:: A20701000

Nomor referensi:: DE-TUR-TOR-1999-00001

Pembaruan:: terakhir pada 10.03.2026

Deskripsi

This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine.

Overhauled in 2017, with two additional similar machines available (both overhauled in 2018)
2017 Overhaul Details:
Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up.

Additional Information

• Maximum bar length: 3040 mm
• Electrical control cabinet
• AC drive motors
• Motor voltage: 3 x 380 V 50/60 Hz
• Control voltage: 1 x 24 V DC
• Movable headstock
• Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement
• Absolute measurement system
• 9 axes with C1 and C4
• Drum bar loader 'HYBRIDE 10+5'
• 14 guide tubes for 1–4 mm bars
• 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm
• Tryton collet
• 2 different hybrid drums
• Direction-dependent spindle stop S1
• Can be equipped with Robobar SSF 3 m bar loader

Gsdpjx D D Ikjfx Ah Deip
Technical Specification
Counter spindle: Yes

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2017

1.397 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 631 7... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin bor dan mesin frais TOS VARNSDORF WHN 13.8 C

Jászberény

10.386 km

Mesin bor dan mesin frais
TOS VARNSDORFWHN 13.8 C

€30.000

EXW harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07-16 1990, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 800 mm, Dijual mesin dalam kondisi baik seperti terlihat di gambar, diproduksi tahun 1990 dan dilengkapi dengan kontrol NCT 90. Mesin ini sangat jarang digunakan dan dijual karena kurang dimanfaatkan. Berat total mesin adalah 33 ton. Mesin sepenuhnya berfungsi. Pembongkaran dan pengiriman menjadi tanggung jawab pembeli. Gjdpfx Ahew Sx Age Deip

Lihat detail

Iklan kecil

Pusat permesinan CNC OKUMA Euro Center V50

Dieburg

11.160 km

Pusat permesinan CNC
OKUMAEuro Center V50

Hubungi

Iklan kecil

Mesin ledakan kontinu - tepi profil MUNK-SCHMITZ Stab.- + Profilkantenstrahlanlage

Rödermark

11.162 km

Mesin ledakan kontinu - tepi profil
MUNK-SCHMITZStab.- + Profilkantenstrahlanlage

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: MS 1153, Angbot 23158 Gedjllvr Djpfx Ah Djip Technical Data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement for blasting system: 1600 x 2000 x H 1750 mm - Space requirement for blast media vessel: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan: MUNK - SCHMITZ - Airflow: 700 – 1500 m³/h - Extraction fan power: 3 kW - Space requirement for filtration unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Lihat detail

Iklan kecil

HERMLE C30U + RS Automation HERMLE C30U + RS Automation

Belanda

11.248 km

HERMLE C30U + RS Automation
HERMLEC30U + RS Automation

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 18.000 rpm, This 5-axis HERMLE C30U was manufactured in 2006 and offers advanced features for precision machining. This vertical machining center is ideal for complex geometries and represents a significant asset for increasing your production efficiency. Consider the opportunity to acquire this HERMLE C30U vertical machining center. Contact us for further information. Additional Equipment • Tool magazine: Auxiliary magazine ZM157 • Tool breakage/measurement: BLUM tool breakage/measurement • Touch probe: Heidenhain • Event messenger: Available • Electronic thermal compensation: Provided • External compressed air: Available / Oil mist extraction: Available / Chip trolley: 450 liters • Transparent swiveling window: Available • Further accessories: Handheld control module, suction flange 1, bed flushing, purge air for scale, machine license TCS-Soflex Machine Advantages Technical Advantages • NC swivel rotary table: Diameter 280 mm • Table axis: A-axis offset / Table specification: 6-way rotary feedthrough • Spindle hours: approx. 50,000 hours • Internal coolant supply: 80 / Filter: Paper belt filter / Conveyor: Scraper belt conveyor / Automatic cabin door: Yes • Polycarbonate safety glass: Window / Frequency: 50 Hz Gijdpsx D Ew Hsfx Ah Dsp • RS automation Technical Specification Taper size SK 40

Lihat detail

Iklan kecil

Mesin penggilingan DECKEL-MAHO DMC 1035 V

Jünkerath

11.307 km

Mesin penggilingan
DECKEL-MAHODMC 1035 V

€34.000

harga tetap ditambah PPN

Hubungi

Iklan kecil

Swedia

10.387 km

Mesin bor meja
TOS VARNSDORFWHN 13.8

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.250 mm, beban meja: 12.000 kg, diameter spindel: 130 mm, kecepatan spindel (maks.): 1.000 rpm, panjang meja: 1.800 mm, lebar meja: 1.600 mm, Heidenheim TNC 355 Gisdpfx Ahoyf Uc Ao Dop

Lihat detail

Iklan kecil

Fuente de Cantos

12.670 km

Mesin Pembentuk Gear
DEMMOF7280

Hubungi

Kondisi: baik (bekas), Max. gear diameter 250 mm with 3" cutter Module: 5.5 Gisdpfx Ahsgq Dgds Dep Hobbing length: 70 mm Cutter module: 5.5 Max. recognized outside diameter: 300 mm Spindle diameter: 85 mm Table bore diameter: 39 mm Table outside centering diameter: Ø139.75 mm Electric tool motor (power): 4 HP Height: 1,800 mm Length: 1,450 mm Weight: 2,450 kg Width: 1,000 mm

Lihat detail

Iklan kecil

Mesin penggilingan portal MTorres MGP-51350 TT

Lemmer

11.303 km

Mesin penggilingan portal
MTorresMGP-51350 TT

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2003, jarak pergerakan sumbu X: 13.000 mm, jarak lintasan sumbu Y: 4.500 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 30.000 rpm, jarak antara penyangga: 6.500 mm, hidung spindel: HSK A63, Achsenwege: X-Achse: 13.000 mm, Y-Achse: 4.500 mm, Z-Achse: 1.000 mm Abstand zwischen den Ständern: 6.500 mm Schwenkachsen: C-Achse: 190°, A-Achse: 110° Eilgang (XYZ): 15.000 mm/min Eilgang (AC-Achse): 10 U/min CNC-Steuerung: Siemens 840D Spindelaufnahme: HSK A63 Spindeldrehzahl: 30.000 U/min Spindelleistung: 20 kW Werkzeugwechsler: 20 Plätze Torrestool-Spannvorrichtungen: 16 Stück Verfahrwege Torrestool-Tisch: X-Achse: 11.500 mm, Y-Achse: 3.500 mm, Z-Achse: 750 mm Herkunftsland: Spanien Maschinenabmessungen (LxBxH): 19.000 x 11.000 x 6.770 mm Maschinengewicht: 70.000 kg Die Torresmill Gantry ist eine 5-Achs-CNC-Fräs- und Bohrmaschine, die speziell für die Bearbeitung von Luftfahrtmaterialien (Verbundwerkstoffe, Aluminium, Titan, Stahl, ...) entwickelt wurde. Giodpfxstt I Sfe Ah Dsp Die Torresmill Gantry lässt sich optimal mit dem Torrestool-Universalspannsystem kombinieren und garantiert so maximale Flexibilität und reduzierte Prozesszeiten.

Lihat detail

Iklan kecil

Willich

11.289 km

Mesin bubut
LANDONIOTMU 1200

€3.000

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 1988, Spitzenweite 1200 mm Drehzahl A) 70 - 380 U/min. Drehzahl B) 380 - 2000 U/min Gewicht 2,2 t Drechselbank +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Godpfx Ask Sat Djh Djip Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++

Lihat detail

Iklan kecil

Karlsbad

11.204 km

Pusat permesinan vertikal
DMGCMX 600 V

Hubungi

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, daya nominal (semu): 9 kVA, torsi: 82 Nm, produsen pengendali: Siemens, lebar meja: 560 mm, panjang meja: 900 mm, beban meja: 600 kg, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 5.200 kg, jumlah spindel: 1, jumlah slot dalam magazin alat: 60, diameter pemasangan: 40 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Vertical machining center DMG MORI SLIMline multi-touch control Table size: 900 x 560 mm Giedpfx Asw Ei E Hoh Dsp Table load: 600 kg Direct position measuring system X, Y, Z SK 40 spindle taper 20 bar internal coolant supply (IKZ) 60-position tool changer Chip conveyor Renishaw probe kit for SIEMENS control

Lihat detail

Beriklan di sini