Mesin bubut otomatis

TORNOS DECO20-DECO 26 Werkzeughalter

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Ljdpfsyidvdsx Adgsag Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles max. nominal bore D=51mm Lasdpfxsiay Sfe Adgog Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including bar loader IEMCA PRA40/37/F, year 1987 (bundle magazine) Painted in light blue and light grey Tool configuration may differ from images. Please contact us for further information and pictures via mail(at) or

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, berat benda kerja (maks.): 2.500 kg, lebar total: 3.200 mm, panjang total: 15.800 mm, jarak antara pusat: 6.000 mm, diameter benda kerja antara pusat: 850 mm, berat keseluruhan: 19.000 kg, Kami menawarkan mesin gerinda silinder CNC Hol-Monta spol.sro UB 85 / 6000 yang sangat baik, tahun produksi 2014. Model: UB 85 / 6000 CNC Tipe kontrol: Kavalir K 51-2 Nomor seri: H 214 09 005 Diameter ayun: 850 mm Jarak antar senter: 6.000 mm Perlengkapan gerinda internal Penopang tetap (steadyrests) Lodpfxsy Hgrgs Adgeag dan lain-lain.

Kondisi: bekas, Tahun pembuatan: 2001, STAR mesin bubut otomatis jenis long turning S16-R, tahun pembuatan mulai 2001. Mesin bubut otomatis type SA16-R, Ø16mm dengan magazine FMB Minimag. Spindel pembantu. Conveyor sabuk untuk suku cadang. Sistem pendingin hanya menggunakan oli. Tanpa conveyor serpihan. Laodpfx Aexmurrsdgeg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, An optical 3D coordinate measuring device from Keyence with a 360° 3D scan function is available. Measurement accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/combined: 200mm/500mm, rotation range: 360°, tilt range: 45°, maximum table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation is available. An on-site inspection is possible. Lajdpfxowx Rcyo Adgsg

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 [mm] - Travel path: 240 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 7.5 [kW] - Minimum C-axis resolution: 0.1 [degree] SUB SPINDLE - Max. bar diameter: 32 [mm] - Spindle speed: 6,000 [rpm] TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] BACKWORKING - Number of positions: 7 - Number of driven positions: 3 Ljdpfx Ajuhax Ejdgeag - Driven tool speed: 6,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Operating hours: 56,433 [h] EQUIPMENT - CNC control: Fanuc - Drive for powered tools at: S2, S3, S5 V+H - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Kondisi: bekas, TECHNICAL DATA - Number of Axles: 3 MAIN SPINDLE - Spindle Nose: A2-8" - Spindle Drive Power: 26 kW - Spindle Speed: 3,000 rpm - Max. Bar Capacity: 91 mm - Max. Machining Diameter: 430 mm - Max. Swing over Bed: 650 mm - Minimum C-Axis Resolution: 0.001° TURRET - Number of Positions: 12 - Number of Driven Stations: 12 - Travel X/Z: 245/1,040 mm - Tool System: BMT65 - Driven Tool Speed: 5,000 rpm - Driven Tool Power: 5.5 kW TAILSTOCK - Tailstock Type: Numerical - Taper: MT4 - Tailstock Travel: 966 mm - Quill Stroke: 100 mm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power Input: 41 kW WEIGHT AND DIMENSIONS - Footprint: 3,780 x 1,610 mm - Machine Height: 1,937 mm - Machine Weight: 6,500 kg OPERATING HOURS - Operating Hours: 0 h EQUIPMENT - Control: Siemens 828D - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-In Programming: SHOPTURN - 3-color Status Light - Coolant Tank * with High-Pressure Pump: 10 bar Laodpfxswyx Rne Adgog * with Rinsing Gun - Chip Conveyor - Tool Measurement Probe - Parts Catcher - Bar Feeder Preparation - Preparation for Steady Rest - 3-jaw Chuck: SAMCHULLY 305 mm

Kondisi: bekas, Tahun pembuatan: 1991, Drilling capacity in steel (diameter): 50 mm Throat depth: 1100 mm Workpiece height – max.: approx. 1000 mm Drilling capacity in cast iron: 60 mm Spindle taper: MT 5 Spindle speeds: 28 – 2500 rpm Feeds: 0.05 – 2 mm/rev Quill stroke: 300 mm Distance base plate – spindle nose: 630 – 1380 mm Column arm vertical adjustment: 750 mm Lasdpfx Adou Sblwjgjg Total power requirement: 6 kW Machine weight: approx. 4 t Machine dimensions (L x W x H): 2,740 x 1,140 x 2,590 mm - with threading unit - Accessories: cube table (L x W x H): 550 x 550 x 550 mm, machine vice, coolant system

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) Laedeuhb Uhjpfx Adgjg - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] Lajdpjuha Ugefx Adgog SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] SUB OPERATIONS - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 14 [kW] WEIGHT AND DIMENSIONS - Required space: 2270 x 1650 [mm] - Machine height: 2200 [mm] - Machine weight: 3500 [kg] MACHINE HOURS - Operating hours: 80,490 [h] ACCESSORIES - Control: Fanuc - Driven tool motorisation at: S2, S3, S5, S6 - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extractor - Coolant reservoir