Mesin bubut CNC

TORNOS Sigma 20/6

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: baik (bekas), Leit and lead screw lathe Matra SM-3000 Country of origin: Spain Swing over bed: 600 mm Ndedpfx Ajvq I Npeahof Swing over cross slide: 370 mm Turning length: 3,000 mm Swing in gap: 900 mm Gap length: 280 mm Spindle bore: 72 mm Speed range: 17–1,652 rpm Number of spindle speeds: 36 Main motor power: 9/11 kW Rapid traverse longitudinal/cross Tailstock: Morse taper 5 Machine weight: approx. 4 t Dimensions (LxW): approx. 4,800x1,300 mm Equipment/Accessories: - Fixed steady rest with rollers / max. workpiece diameter 220 mm - Coolant system - Bed stop - Röhm 3-jaw chuck, diameter 500 mm - 2-axis SINO digital readout - Multifix C toolpost base holder The machine is in very good, fully operational condition. Net price ex works, loaded from stock.

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Nodjt Hagnspfx Aahodf Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: sangat baik (bekas), GRUNDFOS PUMPE TP80-400/2 Artikel: D-5490-Grundfos Pumpe GEBRAUCHTE KREISELPUMPE, GRUNDFOS Typ TP80-400/2, 15,0 kW Nedpfel I R T Nox Aahedf Bar/°C – 16/120 Q – 114,8 m³/h H – max. 34,7 m U/min – 2940 Guter Zustand 3 baugleiche Stück verfügbar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 06.E.400.020, Country of manufacture: CH Voltage: 3x400V - 24V DC Dimensions: 237x206x195 cm Net weight: 5500 kg TECHNICAL DATA Control: Fanuc 21i-MB 3 Axes U: Work grinding wheel axis W: Workpiece to workpiece / dressing axis X: Dressing wheel axis Working area Through-feed grinding Workpiece diameter: Ø 1.5 - 50 mm Working area Plunge grinding Workpiece diameter: Ø 1.5 - 100 mm Max. grinding length: 270 mm Grinding wheel Outer diameter max.: Ø 400 mm Inner diameter: Ø 203.2 mm Max. speed: 50 m/sec Drive power: 11 kW Optional drive power: 29 kW Ndodpeiqt S Aofx Aahof Regulating wheel Max. outer diameter: Ø 250 mm Inner diameter: Ø 127 mm Speed: 5 - 1,000 min⁻¹ Inclination angle: +5° / -5° Drive power: 3.7 kW Positioning accuracy All 3 axes: 0.1 µm Glass scale resolution: 0.05 µm Dimensions Length: 2060 mm Width (with door open): 2370 mm (3120 mm) Height (with guard open): 1950 mm (2100 mm) Weight: 5500 kg Compressed air Max. pressure: 16 bar Air consumption: 165 L/min Air consumption with dressing spindle: 250 L/min Temperature: +15° / +40°C Errors and omissions excepted, the technical data is provided without obligation.

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), Vertical Turning Center Dörries Scharmann Model VCE 2000/160 Pallet Size: 1,600 mm Pallet Load Capacity: max. 8,000 kg Number of Pallets: 13 units Table Indexing: C-Axis 0.001° Table Cross Travel (X): 2,300 mm Column Longitudinal Travel (Z): 1,500 mm Crossbeam Positions: 9 steps of 100 mm each Feed Rate X/Y/Z: 1 – 6,000 mm/min Rapid Traverse X/Y/Z: 8 m/min Max. Swing Diameter: 2,000 mm Max. Workpiece Height: 1,500 mm Main Spindle Spindle Drive Motor: 69 kW Spindle Speed: 2.8 – 315 rpm Automatic Tool Changer for Turning: 59 positions – System 240.2 Live Spindle – SK50 Spindle Drive Motor: 30 kW Spindle Speed: 10 – 1,500 rpm Automatic Tool Changer for SK50: 61 positions CNC Controller: Siemens Sinumerik 880M Accessories FMS (Flexible Manufacturing System): 13 pallets Rotary Loading Stations: 2 units Coolant Unit with Filtration System Through-Spindle Coolant Supply Machine Weight: Approx. 40 tons Year of Manufacture: 1993 (See also other listings from this seller) Ndsdjguk S Sopfx Aahef

Tahun pembuatan: 2007, Kondisi: bekas, Wheel diameter – max. 400 mm Wheel width – mm Module – max. – Nsdpfjgr Harsx Aahjdf Workpiece diameter 36-300/400 mm Center distance 135-290 mm Spindle speeds – infinitely variable 3000 rpm Centre distance 100-550 mm Control system Machine weight approx. 4,000 kg Space requirements approx. 2000 x 3055 x 2788 mm CNC control Siemens 840 D Test procedures: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli-test under double flank contact Features: - Operation with up to 6 test slides - Maximum test accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (Type: Vogel) - Oil mist extraction (Type: Elbaron)

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: 19780, Grinding length: 600 mm Grinding width: 300 mm Workpiece height: 375 mm Spindle speed: 1,000 – 3,000 rpm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 2.8 – 8.4 kW Machine weight approx.: 3.5 t Ndodpfx Aaocxxrzohef CNC-controlled surface grinding machine with 3D-controlled profile dresser, ELB CNC Unicon control system with integrated electronic handwheel, monitor, analog spindle load display, infinitely variable cross feed, coolant system with magnetic roll separator, full enclosure, separate control cabinet, additional grinding wheel with flange.

Kondisi: sangat baik (bekas), Double spindle, C-axis FANUC 18i-TB control Turning diameter: up to 300 mm Turning length: up to 366 mm Main spindle speed: 30–5,000 rpm Counter spindle speed: 30–6,000 rpm Turret: 12 driven stations C-axis indexing: 0.001 degrees Various accessories Nodpfowufdqsx Aahedf MARCELS MASCHINEN CH

Kondisi: baik (bekas), Tahun pembuatan: 2002, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: Heidenhain, Pusat Pemesinan 3-Axis Pabrikan: Bridgeport Seri: VMC-1000 XP Nsdpfsw Nyfdjx Aahedf Tahun Pembuatan: 10-2002 Jenis Kontrol: Heidenhain iTNC-530 Jam Operasi: n/a S/N: 82XXXX Data teknis: ----- - Perjalanan sumbu X-Y-Z: 1.050 x 610 x 600 mm - Spindel: max. 8.000 rpm - Dudukan alat: SK40 - Magasin alat: 22x - Sistem pendingin - Pendingin internal / pendingin melalui spindel - Skala kaca pada semua sumbu X-Y-Z - Pelumasan terpusat - Berat: sekitar 4,2 t - Dimensi PxLxT: 3.000 x 2.350 x 2.400 mm Aksesori: ----- - Manual - Paket dudukan alat Fitur khusus: ----- - Pendingin internal dinonaktifkan karena saluran pendingin pada spindel rusak - Spindel diganti pada tahun 2023, jam kerja sedikit, putaran sangat presisi.