Mesin gerinda silindris

TOS Prague BUB 50/2000

Kondisi: bekas, Tahun pembuatan: 1965, Tersedia dua unit WMW SU 315x3000, daya sambungan mesin 1/2: 12,6/12 kW, berat mesin 1/2: 8,2/9 t, sebaiknya direkondisi. Fodpsxg Ihgsfx Airegc

Kondisi: baik (bekas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre height: 125 mm Centre distance: 400 / 700 / 1025 mm Maximum longitudinal slide travel: 400 / 700 / 1000 mm Longitudinal Slide Table speed: 50 – 5000 mm/min Reversal delay: 0-6 s Minimum automatic feed: 1.5 mm Maximum travel: 400 / 700 / 1020 mm Maximum table swivel angle: 12 / 30 / 78° Cross Slide Swivel range: ±45° Rapid traverse: 40 mm Handwheel feed travel: 20 mm Maximum plunge depth: 1.7 mm Grinding Spindle Headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Rotational speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece Spindle Headstock Swivel range: 0 – 90° Speed range: 30 – 675 rpm Mounting taper: Morse 5 Collets: W25 Tailstock Fgjdpfovca Izex Airoc Mounting taper: Morse 3 Quill stroke: 30 mm Total power requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or currency of the information provided.

Kondisi: bekas, Technical Details: Swing diameter: 200 mm Distance between centers: 450 mm Cross traverse: 245 mm Longitudinal traverse: 830 mm Table feed rate: 0.05–4.5 m/min stepless Spindle speed (grinding spindle): 1,780 / 2,050 rpm Spindle speed (workpiece spindle): 50–500 rpm Grinding wheel dimensions: 350 x 32 x 127 mm Table size: 2,200 x 280 mm Table swivels on both sides: 9° forward / 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2 x 2.05 x 1.6 m UNIVERSAL EXTERNAL CYLINDRICAL GRINDING MACHINE without internal grinding arrangement - For precision grinding of external (and internal) cylindrical and tapered surfaces. - Adjustment of the grinding spindle head by hand or hydraulically - Infinitely variable hydraulic table feed - Grinding spindle swivels by 60° - Workpiece spindle head swivels by 90°, morse taper MT 4 - Tailstock morse taper MT 3 Fodpfxou Ng Dgo Airjgc Equipment: - Dressing device - Coolant tank with pump and supply lines in stock.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 35.598 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07400004031, daya motor spindle: 20 W, kecepatan spindel (min.): 3.250 rpm, kecepatan spindel (maks.): 5.000 rpm, saluran batang: 90 mm, berat keseluruhan: 10.000 kg, Capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - Asse Y sulla torretta superiore - Contropunta - Controllo Siemens 840D power line - Macchina in condizioni perfette, sempre utilizzata con olio - Completamente attrezzata e in ottimo stato - Caricatore di barre LNS Sprint S2. Fgodpfx Aiouyx Hzeroc

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Fgedpfxot Hww Ds Airjc Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: sangat baik (bekas), Sunnen GH210 Mesin Honing Horizontal Tahun 2010 Panjang Langkah Maks.: 8000 mm Kecepatan Spindel: 0 - 300 rpm Daya Maks Spindel: 40 Hp (29,83 kW) Daya Maks Stroker: 18 Hp (13,42 kW) Rentang Kecepatan Langkah: 0 – 100 ft/menit (0 – 30,5 m/menit) Fodpjw U Uh Djfx Airjgc Rentang Diameter Dalam: 2 – 24 inci (50,8 – 609,6 mm) Diameter Luar Standar: 26 inci (660,4 mm standar) Berat Maksimum Bagian: 8000 kg Perkiraan Berat Mesin: 12.066 kg 400 VAC 50 Hz, 3 Fasa (85 A) Kontrol Siemens Simatic,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Mikroskop elektron pemindai tipe Zeiss XB 350 Perlengkapan & Aksesori • tanpa kolom FIB • Perangkat lunak SmartSEM dan SmartFIB • GIS dengan prekursor Pt • Pembersih plasma terintegrasi • EDX Oxford Xplore 30 (termasuk antarmuka & perangkat lunak) • Ruang kunci otomatis 200 mm • Penghubung listrik (2 x 15 saluran) • Pendingin sirkulasi • Tangki buffer vakum Mode Tenang • ... juga meja, monitor, konsol kontrol (keyboard & joystick Zeiss eksklusif) serta berbagai holder sampel Penempatan: Agustus 2024 Lokasi: Mainz Fjdpfx Aiew Rdvvjrsgc Ketersediaan: tersedia dalam waktu singkat sesuai kesepakatan. Perangkat masih beroperasi dan dapat dilihat serta didemonstrasikan. Perangkat dalam kondisi prima tanpa kerusakan ataupun cacat dan berfungsi sepenuhnya. Informasi lebih lanjut tersedia atas permintaan!

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9101, jarak lintasan sumbu Y: 4.600 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan rotasi (maks.): 6.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Konfigurasi mesin: • PowerPortal4000 • Kepala frais diagonal 45° (C 0,01°/ A 0,01°) • Sistem kamera pada kepala frais diagonal SHW • Antarmuka kepala frais 4-titik Hirth • Heidenhain TNC 7 • Handwheel HR 550 FS • Optimasi Heidenhain untuk pemesinan 5-sumbu • X=pilihan bebas, Y=4.600 mm, Z=1.600 mm • ToolCenter dengan 90 alat • Sistem pendingin 2.500 l • Pompa pendingin 70 bar / 30 l/menit • Pergantian pendingin air-udara • Pistol pencuci di area kerja • Penggerak utama 75 kW hingga 6.000 rpm • Dudukan alat SK 50 BIG-PLUS • Penutup dan kisi-kisi lantai • Konveyor serpihan ganda • SHW-UniScan • Udara pengunci • Mode operasi 3 Fgjdoygtnaopfx Airsc • Probe pengukur nirkabel Hexagon • Lampu LED area kerja • Kamera kedua di area kerja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, MODELU.M. TG20/2500 CNC SIEMENS 840 C DIAMETER PEMBUBUTAN 2500 mm DIAMETER MEJA 2000 mm TINGGI PEMBUBUTAN 2000 mm MAX. BERAT DI MEJA 20000 kg MAKS. KECEPATAN MEJA 2-250 rpm PENUKAR ALAT 10 PCS MOTOR MEJA 60-100 kW Sumbu C PENAMPANG RAM 250x250 mm Fjdpsxwp D Dofx Airegc FEED CEPAT 10000 mm/menit KECEPATAN MILLING 0-4000 rpm ALAT-ALAT BERGERAK BOBOT 46000 kg

Kondisi: bekas, Tahun pembuatan: 1992, kecepatan spindel (min.): 7.500 rpm, kecepatan spindel (maks.): 24.000 rpm, 4 motor-driven grinding spindles (liquid-cooled, sealing air / oil mist lubrication) including the REFU HF converter, suitable for example for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter / inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, sold without warranty – year of manufacture approx. 1992 A collection of various grinding spindle shafts / arbor mandrels for grinding wheels is available for these grinding spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. Fgsdpfx Ajl Tn Afsirec We sell exclusively to countries within the European Community.