Mesin penggiling silinder - universal

TOS BU 31

Kondisi: hampir baru (bekas), Ketinggian senter pada meja 330 mm, diameter maksimum yang dapat dibubut di peluncur 408 mm, diameter maksimum yang dapat dibubut di meja 640 mm, diameter maksimum yang dapat dibubut di rongga 899 mm, jarak antara senter 2000 mm, kecepatan spindle variabel, rpm 18/1500, diameter lubang spindle 105 mm, dudukan spindle ASA 11”, kepala lepas MK5, diameter laras 90 mm, langkah 250 mm. langkah melintang peluncur 275 mm. motor utama 15 hp. berat mesin 3450 kg. Lrsdpsx Dikksfx Apten

Tahun pembuatan: 1971, Kondisi: bekas, en-GB:Technical Details: Maximum wheel diameter: 300 mm Module range: max. 5 / min. 0.5 Maximum workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions (LxWxH): 1800 x 1850 x 2500 mm Control cabinet dimensions: No. 1: 1930 x 400 x 1920 mm No. 2: 800 x 230 x 1950 mm Exhaust system dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine Suitable for modules up to 5 and diameters from 240 – 300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30′ Max./min. helix angle at 24 teeth: 6000 / 200 mm Lrjdpfxsvc Apbo Apten Max. helix angle, both sides: 45° Grinding worm speed: 1,900 rpm Supplied without dressing attachment Equipment: Approx. 77 various change gears, extension pipes, and various accessories Two of these machines are available for sale. Both machines are supplied via two shared control cabinets and an exhaust system.

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Ledjcc D Ddopfx Aptjrn Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: bekas, Tahun pembuatan: 1990, Grinding length: 1500 mm Grinding width: 550 mm Workpiece height: 400/450 mm Table size: 1900 x 450 mm Table speed: 1 - 25 m/min Automatic cross feed: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Lredpfx Apswlviroton Grinding spindle speed: 1400/2800 rpm Total power requirement: 15 kW Voltage: 380 V Machine weight: approx. 5 t The machine was overhauled in 2015 and converted to a modern control system. The machine is equipped with a coolant system, automatic vertical infeed, dressing device, and wheel mounts.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119/020.0895, Asal pabrikasi: Swiss (CH) Tegangan: 400V Dimensi: 2700x2350x2100 mm Berat bersih: 4500 kg DATA TEKNIS Kontrol: Fanuc 16i-T Tinggi senter: 175 mm Jarak antara senter: 1000 mm Sumbu Linear Panjang penggerindaan: 500 mm Rentang gerak: X: 267 mm, Z: 650 mm Ljdpfxolbgfce Aptjrn Kepala Spindel Gerinda Sudut putar tak terbatas: +/- 8,5° Dimensi batu gerinda luar: 500x80x203 mm Daya: 7,5 kW Kecepatan: 44 m/detik Kepala Spindel Benda Kerja Tipe tirus: MK5 Sumbu C: +/- 5° Daya: 1 kW Putaran: 30-1000 min-1 Dudukan Ekor Tipe tirus: MK3 Jarak gerak pinole: 35 mm Diameter pinole: Ø 50 mm Berat maksimum benda kerja: 130 kg Catu Daya Tegangan: 400V 50 Hz Data teknis diberikan tanpa kewajiban, kesalahan atau perubahan mungkin terjadi.

Kondisi: bekas, Kúp jarak minimum/maksimum: 0–108 mm Sudut kemiringan minimum/maksimum: 5°/84° Kontrol: GE Fanuc Series 0-GC Diameter lingkaran pitch (rasio 1:1): 152 mm Diameter lingkaran pitch (rasio 10:1): 216 mm Jarak diameter (paling halus/paling kasar): 1.3/8.5 Mod. Permukaan kepala roda gigi maks.: 35 mm Spindel pisau – rentang kecepatan rotasi: 41–121 rpm Rentang kecepatan spindel kerja: 0–33,33 rpm Berat: 9025 kg Lodpfxeyh Rmme Aptjrn Ruang yang dibutuhkan kira-kira: 2707 x 2720 x 2200 mm Perlengkapan/aksesori: - 18 set pisau - Konveyor serbuk - Dokumentasi teknis

Kondisi: hampir baru (bekas), Tahun pembuatan: 1998, Fungsionalitas: tidak berfungsi, tinggi pembubutan: 1.900 mm, berat benda kerja (maks.): 15.000 kg, diameter pembubutan: 2.630 mm, diameter pelat muka: 2.500 mm, tinggi total: 5.000 mm, lebar total: 4.800 mm, panjang total: 4.800 mm, diameter meja putar: 2.500 mm, beban meja: 15.000 kg, diameter meja: 2.500 mm, tahun perombakan terakhir: 2025, masa garansi: 12 bulan, berat keseluruhan: 38.850 kg, kecepatan meja: 2.500 mm/menit, SC2700 Vertical Turning Lathe 2700 dengan 2 Kepala Kerja - Retrofit Selesai Spesifikasi: Ledpfx Ajygldgoptsrn Status retrofit: baru saja di-upgrade (sistem mekanik, listrik, hidrolik), dalam proses penyambungan daya. Panel listrik: peralatan listrik baru, kabel, kabel port, penutup. Motor utama: asli 55 kW, sudah direvisi. Kondisi: secara mekanis seperti baru, jam kerja rendah. Inspeksi: tersedia kapan saja. Atas permintaan, dapat dinaikkan untuk menampung benda kerja yang lebih tinggi, atau mendapatkan upgrade CNC. Harga, instalasi, dan transportasi atas permintaan. Spesifikasi teknis lebih lanjut tersedia atas permintaan.

Kondisi: baru, Tahun pembuatan: 2025, tinggi pembubutan: 2.000 mm, berat benda kerja (maks.): 12.000 kg, diameter pelat muka: 2.000 mm, CNC vertical turning center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø3,000 mm Max. turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (ram vertical travel): 1,200 mm Drive spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Cross rail (vertical travel): 1,000 mm, 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT LCD Tape memory: 1 MB Automatic tool changer: 12 stations (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: New 240 TCR-01 (2 units) Splash guard: table version (R-type standard) External coolant system: 3 bar (80 l/min) Chip conveyor: hinged belt type 4-jaw independent manual chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic unit Work area lighting Ljdpfjxqb D Nsx Aptsrn Signal light: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical manuals Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions – on request Automatic shutdown for N.C – on request Turning tool holder type 240 TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3 phase – on request Linear scales X, Z axes – on request Rigid tapping – on request Automatic tool changer ATC 24 positions – on request Other: INSTALLATION, COMMISSIONING, TRIAL RUN, AND TRAINING – not included in the price INSURANCE AND TRANSPORT – not included in the price Subject to change and errors in technical data. The accessory scope is defined exclusively and within the scope of the textual article description. No claims can be made for any additionally pictured accessories, e.g. for illustrative purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, Kami menjual mesin bubut ini. Mesin terhubung listrik, dapat diuji coba. Aksesori tersedia bersama mesin. Diameter pembubutan: 2.000 mm. Panjang pembubutan: 10.000 mm. Berat benda kerja (maks.): 60.000 kg. Diameter pemesinan: 2.000 mm. Video mesin dapat dikirim melalui WhatsApp. Lrodjxwmbmjpfx Apten

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 520 kg, tegangan masuk: 400 V, kebutuhan tinggi: 1.760 mm, persyaratan ruang panjang: 1.100 mm, lebar yang dibutuhkan: 800 mm, daya nominal (semu): 2 kVA, de_DE_description_DECKEL_S11_Schleifmaschine Lredpfx Apsxdkw Sstjn