Mesin serut dan mesin pahat TOS HOV 25 A

TOS HOV 25 A

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine no.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380 V / 50 Hz Hfodpfx Ansgyd S Sspen Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in excellent condition.

Kondisi: bekas, Tahun pembuatan: 1965, Slot width: 3 - 90 mm Drawing length: 430 mm Working speed: 4 - 12 m/min Slot length: 400 mm Return speed: 15 m/min Hfodetv Iatepfx Anpjn Total power requirement: 5.5 kW Machine weight: approx. 1.4 t Space requirement: approx. 1.3 x 1.7 x 1.5 m Includes various pull broaches and guides

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 27 m/min Maximum workpiece diameter: 320 mm Broaching stations: 3 units Weight: 4.8 t automatic tool feeder Hfodjcdtplepfx Anpen hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Hfodpfx Anow Ighiopsn Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse. Hedpfet Dv I Aex Anpofn

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Hsdpjt Dwb Djfx Anpsfn Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.