Mesin pembengkok tabung mandrel

TRACTO-TECHNIK TurboBend 30 / 3000

Tahun pembuatan: 2015, Kondisi: bekas, Dimensions (length/width/height): 700 x 655 x 1400 mm Filter surface area / m² Number of filter bags: 1 pc. Number of chip collection bags: 1 pc. Weight: 140 kg Rbjdpfxogr Rkxj Abust with control box and start-stop sensor

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Rbodovuuaispfx Abuet Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Rjdpfx Ashgihksbuebt Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows quick tool changes without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high load - With the universal tool holder and various tools, you can work with exceptional flexibility.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, gaya tekuk (maks.): 1.000 t, panjang langkah: 200 mm, kecepatan operasi: 50 mm/dtk, kecepatan mundur: 180 mm/dtk, berat keseluruhan: 8.000 kg, panjang total: 3.915 mm, lebar total: 1.605 mm, tinggi total: 2.655 mm, tegangan masuk: 380 V, frekuensi input: 50 Hz, masa garansi: 24 bulan, Sudut pembengkokan (maks.): 90 °, panjang meja: 3.200 mm, tinggi kerja: 450 mm, Vollelektrische Servo-Abkantpresse Nennkraft (kN): 1000 Stößelhub (mm): 200 Ausladung (mm): 360 X-Achsen-Verfahrweg (mm): 600 R-Achsen-Verfahrweg (mm): 200 Z-Achsen-Verfahrweg (mm): 2500 🔹 Intelligentes CNC-Steuerungssystem – SL100-P mit Hochleistungs-Algorithmen und 12-Zoll-Touchscreen für intuitive Bedienung. Rbsdpfxev Hchls Abuet 🔹 Hochpräzise Maschinenstruktur – Finite-Elemente-Analyse (FEA), spannungsarm geglüht und in einem Arbeitsgang mechanisch bearbeitet für dauerhafte Stabilität und Genauigkeit. 🔹 4-Achs-Hinteranschlag mit intelligenter Steuerung – AC-Servoantrieb, hochdynamische Positionierung mit automatischer Kollisionsvermeidung. 🔹 Präzisions-Kompensationssystem – Einstellbare Bombierung und Feinjustierung für maximale Biegegenauigkeit. 🔹 Leistungsstarker & langlebiger Antrieb – Hochdrehmoment-Servomotor, robuste Kugelgewindetriebe und gekapselter Schutz für eine lange Lebensdauer. 🔹 Vollständig geschlossenes Regelkreissystem – Y1/Y2-Maßstab mit Magnetsensor, Positioniergenauigkeit ±5 μm. 🔹 Optimiertes elektrisches System – Geschlossener Schaltschrank, effiziente Wärmeableitung und übersichtliche Verkabelung für maximale Zuverlässigkeit und Wartungsfreundlichkeit. 🔹 Importierte Präzisionskomponenten – Kugelgewindetriebe und Linearführungen gewährleisten höchste Genauigkeit ohne Streckenkompensation. 🔹 Höchste Präzision, Stabilität und intelligente Automatisierung – konzipiert für den professionellen Einsatz in der Blechbearbeitung!

Kondisi: baru, nl->en Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05° Tube length ----- 1,350 ∞ mm Weight ----- 2,200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0–850°/sec Length feeding ----- Standard 0–2,400 mm/sec Booster ----- 0–1,200 mm/sec Rbsdpfxjga T Exe Abuot Degree of tolerance ----- 0.05°/mm Bending head rotation ----- 0.75 sec Standard components conform to VDMA, ISO, and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with freely programmable robot or loading arm * Weld seam detector and tube positioner (electromagnetic or optical detection) * Free-form radius bending * Simulation/Collision Control * Bed length extension

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 1 h, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, Diameter pipa (maks.): 65 mm, Panjang pipa (maks.): 4.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 180 °, radius tekuk (min.): 90 mm, lebar kerja: 4.000 mm, jumlah sumbu: 3, panjang total: 5.500 mm, lebar total: 1.600 mm, tinggi total: 1.600 mm, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX The CNC mandrel pipe bending machine, capable of bending tubes up to 65 mm in three axes, is Liv Makina’s most powerful model designed for demanding pipe and profile bending tasks in Shipyard & Marine Industry, Thermal Power Plants, Park & Garden Furniture, Fitness & Gym Equipment, and Exhaust Manufacturing sectors. Rbedpfew Hphdex Abuot Challenging bends become effortless with hydraulic rotation technology. - Import design files directly to the machine via Solidworks software - Fully automatic and manual operation via interactive PLC control system - Multilingual user interface - 3D visualisation of product and bending simulations, including pipe collision detection - Automatic calculation of pipe lengths - CE-compliant - Real-time error display on screen - Integrated safety warning system - User-friendly interface with Livmak platform Technical Specifications – TROX 3 Axis 65 CNC - Max Bending Capacity: Ø65 mm x 2 mm - Min./Max. Die Diameter: 90/250 mm - Material Process Length: 4000 mm - Machine Dimensions: 5500 x 1750 x 1750 mm - Total Installed Power: 15 HP - Machine Weight: 3 Tons

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of pipe geometries with bending radii from 1.5 x D → Maximum bending capacity for pipes: 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity for pipes: 30 x 30 x 3 mm → Maximum bending capacity for pipes: 42.4 x 2 mm (stainless steel, max. Rp0.2 260 N/mm²) → Total connected load: 3 kW → Pipe feed length: approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display enables easy and intuitive programming and operation of the machine. After the pipe is fed in, it is clamped in the carriage by the chuck, allowing for precise positioning of the pipe and, thus, the creation of dimensionally accurate geometries. The standard configuration also includes pipe geometry verification before the bending process: if the bending process is started at an incorrect position, the machine will not allow operation. This eliminates operator errors. Optional additional features provide increased convenience and boost the output and efficiency of the system. Data exchange with the optional TBS-3D pipe calculation program (PC version) is handled via USB stick or network. Existing pipe geometries can be imported using the software. Rodpotr U Hlefx Abuobt Standard equipment: → Servo drive for the bending axis 1.5 kW → Adjustable speed → Left-hand bending direction → Bending angle resolution: 0.1° → Maximum bending radius: 120 mm → Bending shaft diameter: 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the pipe in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic pipe clamping with adjustable clamping pressure → Programmable mandrel pre-retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control system calculates feed values and bending angles immediately upon input of length and angle. Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Kondisi: bekas, Tahun pembuatan: 2002, Turning diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Centre height over flat bed: 400 mm Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z-axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed, gear stage 1: 6.40 - 376 rpm Spindle speed, gear stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Redpfx Aow Dvipebusbt Spindle nose according to DIN 55027 - Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MK 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight: approx. 11.00 t Space requirements: approx. 6.00 x 3.00 x H2.60 m Equipment: SIEMENS Sinumerik 810D control, chip conveyor, tailstock, extraction unit, 2 steadies included. Spindle bearings overhauled by OEM 04/2023 Machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 2003, gaya penekanan: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year: 2003 Technical Data Manufacturer: HACO Model: ERMS 60-260 Year of manufacture: 2003 Pressing force: 260 t Bending length: 6000 mm Dimensions (L x W x H): appr. L 7.0 x W 2.0 x H 3.70 m Weight: appr. 31 t Rbjdswkttrjpfx Abuet Equipment • Digital control ATS 560 • Fiessler safety light curtain at the front • Centrally adjustable crowning system • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information without guarantee. A demonstration is possible at any time in the exhibition hall.

Kondisi: baru, Tahun pembuatan: 2026, The skyCUBE M / P / SL laser processing center – the new benchmark in laser material processing! (* Price may vary depending on configuration, this is a factory-new laser machine manufactured by us) Laser options available according to your requirements: CO2 laser 150W / 250W / 400W or fiber laser 1500 – 6000W PFEIFER Laser Processing Center skyCUBE Processing areas: Mclass = X 1250 x Y 650 x Z 100 mm Pclass = X 1250 x Y 1250 x Z 100 mm SLclass = X 1250 x Y 2550 x Z 100 mm The skyCUBE laser processing center – the new multifunctional laser engraving and cutting machine – makes laser processing easy and highly precise – high-speed, high-quality laser engraving and cutting. Rodpebnphvefx Abuobt Our latest and best multifunctional solution impresses even the most experienced operator, not just with its innovative design. This CO2 laser / fiber laser demonstrates outstanding performance in all industrial applications, serving equally well as a CO2 or fiber engraving laser or as a CO2 or fiber cutting laser. With optional laser power up to 1500W (1.5kW), this CO2 laser device / fiber laser system is highly flexible in your production environment. The skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, ensuring maximum operational safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving a wide range of materials, such as various metals, acrylic, solid wood and wood materials, engineered wood products, paper, cardboard, various plastics and foams, textiles, and much more. The machine’s outstanding build quality, 100% produced in Plauen/Germany, guarantees high working accuracy and consistently high quality from the engineering frame to the laser source. With cutting speeds up to 8000 mm/s and engraving speeds up to 4000 mm/s, the high-end laser technology delivers clean and extremely sharp cut edges as well as precise laser engravings. The ergonomic design with a pull-out worktable simplifies loading operations. A drawer at the base of the machine collects cut material for easy disposal. User-friendly and intuitive – the included skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to Windows standards allows for quick and efficient operation. The software features high system stability, professional monitoring, advanced machine control, and compatibility with standard file formats. Data output is managed by layers—each layer configured independently, including the definition of processing sequences and methods. Parameters such as laser power and processing speed are automatically stored for each layer and can be reliably recalled from a material database as needed. Laser projects are transferred to the skyCUBE M laser processing center via a LAN/USB interface. Once transferred, these jobs can be executed repeatedly without needing the connected PC to remain on. A modern touch control panel provides access to all system information and functions.