Mesin bubut CNC

TRAUB TNC 42/65 DG

Tahun pembuatan: 2007, Kondisi: bekas, Wheel diameter – max. 400 mm Wheel width – mm Module – max. – Workpiece diameter 36-300/400 mm Center distance 135-290 mm Spindle speeds – infinitely variable 3000 rpm Centre distance 100-550 mm Control system Machine weight approx. 4,000 kg Space requirements approx. 2000 x 3055 x 2788 mm CNC control Siemens 840 D Test procedures: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli-test under double flank contact Features: - Operation with up to 6 test slides - Maximum test accuracy and repeatability - Machine table with workpiece drive Laodpfjgr Harjx Aahjk - Swiveling pneumatic unit - Spray oil lubrication (Type: Vogel) - Oil mist extraction (Type: Elbaron)

Kondisi: bekas, Tahun pembuatan: 2004, en-GB_001 Laodpfx Astzyx Tjahsk

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 14.029 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 270 mm, panjang pembubutan: 650 mm, diameter pembubutan: 400 mm, lubang spindel: 65 mm, kecepatan spindel (maks.): 4.000 rpm, For sale is a Gildemeister CNC lathe, model NEF 400. The machine is in good condition, immediately available and fully operational. Technical specifications: Year of manufacture: 2007 Control: Heidenhain CNC Pilot 4290 Operating hours: 14,029 h X-axis (cross travel): approx. 220 mm Z-axis (longitudinal travel): approx. 700 mm Max. turning diameter: approx. 400 mm Max. swing over bed: 400 mm Max. swing over cross slide: 270 mm Max. turning length: 650 mm Spindle bore: 65 mm Speed range: 0 - 4,000 rpm Drive power (100% duty cycle / 40% duty cycle): 12/15 kW Max. torque: 400 Nm Number of tool positions: typically 8 Laodpfewig R Iox Aahek Tool holder: VDI 30 Tailstock travel: 680 mm Tailstock quill: MT 4 Clamping pressure: approx. 6.8 kN (hydraulic) Space requirements (L x W x H): approx. 2.5 x 1.7 x 1.8 m Machine weight: approx. 2.8 t Chip conveyor included in the offer. Tool holders and other accessories are not included in the offer, but can be quoted separately. Transport and loading can be organized across Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Lintasan X Y Z: 3000 x 1300 x 2000 mm, Meja: 2000 x 1600 mm, Beban meja: 13.000 kg, Sumbu B: 360 derajat, Heidenhain iTNC530, Kepala spindle ISO SK50, Kecepatan spindle: 5.000 rpm, Magasin toolchanger 60 posisi, Lasdpfxevz A Rie Aahjk Pendingin, Pelindung antarlock.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding Laedpfjuxfucox Aahek - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, TECHNICAL DATA - Number of Axes: 3 - Centre Height: 175 mm - Distance Between Centres: 1000 mm LINEAR AXES - Grinding Length: 500 mm - Travel X x Z: 267 x 650 mm GRINDING SPINDLE HEADSTOCK Lajdeuhbydepfx Aahek - Continuous Orientation: +/-8.5° - External Grinding Wheel Dimensions: 500 x 80 x 203 mm - Grinding Wheel Holder Spindle Headstock Power: 7.5 kW - Cutting Speed: 44 m/s WORKPIECE SPINDLE HEADSTOCK - Taper Type: MT5 - C-Axis: +/-0.5° - Power: 1 kW - Rotational Speed: 30–1,000 rpm TAILSTOCK - Taper Type: MT3 - Quill Stroke: 35 mm - Quill Diameter: 50 mm - Max. Workpiece Weight Between Centres: 130 kg ELECTRICAL SUPPLY - Supply Voltage: 400V 50 Hz - Machine Dimensions: 2700 x 2350 x H. 2100 mm - Weight: 4,000 kg OPERATING HOURS - Operating Hours: 17,775 h ACCESSORIES - CNC FANUC 16i-TA Control - Pictogramming - Studer RELEASE C - Remote Control with Electronic Handwheel - SENSITRON - Hydrobalance HBA 40000-1 Dynamic Balancing Device - MOVOMATIC C25 Automatic Length Probing Arm - MOVOMATIC In-process External Diameter Measuring Arm - Grinding Wheel Guard with Automatic Tilting - Fixed Diamond Dressing Device on Workpiece Spindle Headstock - Coolant Tank: 375 l - Paper Filter - Oil Mist Extraction - Grinding Wheel Flange Holders

Tahun pembuatan: 1971, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 713406, KOM 105 - For sale is a powerful high-performance grinding machine from Kehren & Co, equipped with a paper band filter system from FAUDI. This is a segment grinding machine featuring a vertical grinding spindle. The machine is fitted with two grinding tables/magnetic chucks for pendulum processing. Technical Data: Segment Grinding Machine: - Manufacturer: Kehren & Co - Model: D7B - Year of manufacture: 1971 - Serial no.: 713406 - Two grinding tables/magnetic chucks, each with a diameter of 700 mm - Grinding method: Segment grinding - Control system: Marposs - Weight: 6,600 kg Paper Band Filter System: Ljdpfx Aajg Nt A Eohoak - Manufacturer: Faudi - Filter Systems - Model: AFB 1.3 / 1001 - Year of manufacture: 1992

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Lasdpfx Aocxxx Heahjk Machine weight approx.: 3.5 t

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters Laedpfx Asul Efmsahek - Documentation of setting and measurement results via printer - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS 32 C Laodpouhaqbsfx Aahok