Mesin bubut siklus CNC

Traub TND 360

Kondisi: bekas, Tahun pembuatan: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm CNC control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3,150 rpm / 2-stage Rapid traverse: 10,000 mm/min Tool turret - number of stations: 8 Operating hours / on-time hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Kdedpfx Acju Rqabe Hor Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: 200 mm diameter hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setup

Kondisi: baru, Tahun pembuatan: 2026, Stepless electronic spindle speed: 40–4000 rpm Spindle taper: MT2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth set via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase with frequency inverter, 230 V, 0.54 kW Kjdpfoby Swhsx Ac Hsdr OPTION: Drilling package no. 2 - FELIX vice, jaw width 80 mm, max. opening 120 mm - Keyless drill chuck 1–13 mm, mount B16 - Morse taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN SUPPLY ANY PRODUCT FROM THE FLOTT RANGE! PLEASE REQUEST AN OFFER!

Kondisi: bekas, Tahun pembuatan: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Cutting width: 1.3 mm Control: POSIMOD Square cutting capacity: 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Residual workpiece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total connected load: 10.0 kW Machine weight approx.: 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Ksdpfx Aowm Rm Isc Hedr Accessories: Infeed roller conveyor, 2500 mm long, chip conveyor, coolant system

Kondisi: baik (bekas), Tahun pembuatan: 2005, Machine as per photos Condition: Very good, apart from a defective slot in the tool magazine. Kdedpfxjvf D Ano Ac Hsr Tool holders included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC Kdsdsx D Drcopfx Ac Hor • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Tank capacity: 775 l, max. batch weight: 100 kg, heating power: 26 kW, max. temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swivel drive, automatic water filling, and oil separation with a coalescence separator unit and oil collection container. Documentation available. An on-site inspection is possible. Kdsdewr Dxhepfx Ac Her

Kondisi: baru, Tipe generator diesel yang lebih senyap, NWK165 Daya utama: 120 kW / 150 kVA Mesin: Fawde & CA6DF2-19D, 4 silinder, berpendingin air Sambungan: Stop kontak & sakelar pelindung RCD 4P Kapasitas tangki: Frekuensi: 50 Hz, Tegangan: 400/230 V Tipe pengatur: Elektronik Pengontrol: Comap Intelilite4 AMF8 Kedjnkau Njpfx Ac Hedr Termasuk: AVR, pengisi daya baterai, pemanas air

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Kdjdpstrvzxsfx Ac Hsr Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: bekas, Tahun pembuatan: 1996, jam operasional: 7.827 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119713, diameter putar di atas sled silang: 160 mm, panjang pembubutan: 244 mm, diameter pembubutan: 160 mm, lubang spindel: 45 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 1 rpm, jarak pergerakan sumbu X: 155 mm, jarak gerak sumbu Z: 290 mm, daya motor spindle: 10.000 W, gerak cepat sumbu X: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan rotasi (maks.): 6.000 rpm, tinggi total: 1.780 mm, panjang total: 2.000 mm, lebar total: 1.330 mm, jarak gerak quill: 150 mm, diameter quill: 55 mm, gores kuas bulu: 150 mm, berat benda kerja (maks.): 25 kg, berat keseluruhan: 2.700 kg, saluran batang: 40 mm, diameter luar chuck: 154 mm, Diameter batang (maks.): 45 mm, diameter spindel: 50 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, mazak-qt10-en Kodpfeyt E Nvjx Ac Hjdr

Kondisi: bekas, Tahun pembuatan: 2010, jam operasional: 26.827 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, panjang pemakanan sumbu X: 2.600 mm, panjang umpan sumbu Y: 700 mm, panjang umpan sumbu Z: 700 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 40 m/menit, laju pemakanan sumbu Z: 40 m/menit, daya nominal (semu): 42 kVA, produsen pengendali: Siemens, model controller: 840 D SL Operate, berat benda kerja (maks.): 6 kg, tinggi total: 2.800 mm, panjang total: 7.000 mm, lebar total: 5.000 mm, lebar meja: 700 mm, panjang meja: 2.900 mm, beban meja: 2.150 kg, kecepatan rotasi (maks.): 8.000 rpm, berat keseluruhan: 14.500 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 8.280 h, daya motor spindle: 23.500 W, hidung spindel: SK 40, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 6.000 g, Perlengkapan: konveyor serpihan, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. Travel paths: x-axis travel: 2,600 mm y-axis travel: 700 mm z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Speed range - main spindle: 8,000 rpm Drive power - main spindle: 23.5 kW Tool holder: SK 40 Work table: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with empty adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Maximum feed rate: 40,000 mm/min Maximum feed force: 8 kN Total power requirement: 42 kVA Machine weight: approx. 14.5 t Space requirement: approx. 7.0 x 5.0 x 2.8 m Equipment: - Chip conveyor - Coolant system - High-pressure cooling - Internal coolant supply - Paper band filter - 2x rotary viewing windows - Tool magazine, 30 pockets - Touch probe - Operating mode 4 - Prepared for a 4th axis Kedpfx Acoytruxj Hodr At approximately 7,500 spindle hours, the X-axis and the tool changer were overhauled. If you have any questions or require further information, please feel free to send us a message or call us. Accessories, depicted tools, and clamping devices are included in delivery only if explicitly stated in the additional information. Technical data and specifications may be subject to change and error. Sale subject to prior disposal!