Mesin bubut tipe Swiss

Traub TNL 12/7

Kondisi: baik (bekas), Tahun pembuatan: 2007, CNC Pembubut Panjang Produsen: Traub Model Mesin: TNL 12 Kontrol: Traub Tahun Pembuatan: 2007 DATA TEKNIS Kepala spindle - Diameter batang maksimum (mm): 12,7 - Kualitas material bundar (DIN 671) (mm): Ø Xh9 - Kecepatan putar maksimum (rpm): 12.000 Panjang putar maksimum / langkah spindle - Dengan bush pemandu tetap (mm): 130 - Dengan bush pemandu berputar (mm): 80 - Dengan bush pemandu yang dapat diprogram (mm): 80 - Resolusi sumbu C (derajat): 0,001 - Rapid traverse Z1 (m/menit): 30 Pembawa alat 1 - Perjalanan slide X1 (mm): 35 - Perjalanan slide Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/menit): 15 - Waktu antar pemotongan (detik): 0,3 Pembawa alat 2 - Perjalanan slide X2 (mm): 35 - Perjalanan slide Z2 (mm): 50 - Rapid traverse X2/Z2 (m/menit): 15 - Waktu antar pemotongan (detik): 0,3 Penggerak alat untuk pembawa alat 1 dan 2 - Kecepatan putar maksimum (rpm): 8.000 - Jumlah alat maksimum: 2xG - Diameter penjepit untuk alat bor (mm): 0,5-7 Spindle sekunder / unit depan - Diameter batang maksimum (mm): 12,7 - Langkah memanjang maksimum 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/menit): 30 - Dudukan alat (jumlah): 4 - Kecepatan putar maksimum (rpm): 12.000 - Resolusi sumbu C (derajat): 0,001 Unit belakang, diseret / tetap - Langkah Z diseret dengan spindle kerja (mm): 80 - Diameter dudukan alat (mm): 20 Dsdjzgczbepfx Ac Tokp - Dudukan alat (jumlah): 3 Unit belakang (sumbu X4) - Langkah X4 (mm): 39 - Kecepatan rapid traverse (m/menit): 15 - Diameter dudukan alat (mm): 28 - Dudukan alat (jumlah): 4 Penggerak alat untuk unit belakang (dengan sumbu X4) - Kecepatan putar maksimum (rpm): 10.000 - Jumlah alat penggerak maksimum: 4 - Diameter penjepit untuk alat bor - digerakkan (mm): 0,5 -7 - tidak digerakkan (mm): 0,5 - 10 Perangkat coolant/lubrikasi - Tekanan pompa satu tahap (bar): 3 - Kapasitas tangki (l): 180 - Kapasitas pemompaan (l/menit): 40 FITUR PERLENGKAPAN - Konveyor chip - Bar feeder FMB Minimag 18 - Sistem tekanan tinggi - Sistem pemadam api Perubahan dan kesalahan data serta spesifikasi teknis dapat terjadi.

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Multispindle lathe Schütte AG20 Dkodjhrihyspfx Ac Tep

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm Dsdpouhaxfsfx Ac Tekp SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z-axis stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] OPPOSITE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES Dodouhaw Ujpfx Ac Tjkp - Control unit: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application The line was used for manufacturing heating pipes Condition: Very good 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES Dkjdpfx Acjhy Tp Do Top D-26345 Bockhorn/Grabstede, Germany

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar loader: FMB Minimag 3200 C - Number of driven tool holders: 2 Dedpfx Acjuhawzj Tjkp - Number of fixed tool holders: 14 - Set of collet chucks for feed: F20 - Set of collet chucks for feed: F16 - Sleeve: 4 - Set of tubes and collets for bar feeder - Set of spare parts

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 Dedeuhav Djpfx Ac Tokp - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, An aluminium die-casting machine is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: toggle system, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², performance: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Dkedpfsucfwpox Ac Tjp

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of bar material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Travel X1 (mm): 35 - Travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Travel X2 (mm): 35 - Travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (quantity): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Subspindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (quantity): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Rear Tool Device, Dragged / Stationary - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (quantity): 3 Rear Tool Device (X4 Axis) - X4 stroke (mm): 39 - Rapid traverse (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (quantity): 4 Driven Tool Unit for Rear Device (with X4 Axis) - Max. speed (rpm): 10,000 Dedpfx Acsy N A S Uj Tekp - Driven tool stations (quantity): 4 - Clamping diameter for drilling tools - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant System - Pump pressure, single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High-pressure coolant system - Fire extinguishing system Subject to technical changes and errors.

Kondisi: baik (bekas), Board sorting line / Sorting system / Length sorting line Esterer Dkedpfxjgw Scqo Ac Tjp Right-hand discharge 5 sorting bins Total length: 26 meters 1st bin: 2 meters 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.