Mesin CNC Traub TNL 26

Traub TNL 26

Tahun pembuatan: 2003, Kondisi: bekas, Arus nominal: 60A, tegangan kendali: 24V, daya input: 33kW, panjang: 2290mm, lebar: 1350mm, tinggi: 1630mm, berat: 4,65 ton, jumlah jam operasi: 78.439 jam, dilengkapi dengan dokumentasi, sistem pembuangan serpihan, dan pemuat batang. Inspeksi di lokasi dimungkinkan. Ljdezuzz Aepfx Ac Hehk

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray rotation cleaning system type TR450 is an automatic cleaning and degreasing machine equipped with an easy-to-open upward lid. The unit is designed for cleaning individual parts and/or bulk material in baskets sized LxWxH 520x320x200h mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on ensuring a gentle agitation of parts within the basket when dealing with bulk material; the fill level in the basket must therefore be observed. Additionally, the system is equipped with a flood tray beneath the product basket, allowing for immersion scooping of the parts for even better cleaning results. Including the following features: • Complete internal and external construction in stainless steel 1.4301 Lhedpfxsfbt Sio Ac Hjk • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (capacity: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable closure lid Connected load: approx. 20 kW (32 amp plug)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 8.000 rpm, saluran batang: 32 mm, model controller: Traub TX8i-S, jumlah slot dalam magazin alat: 12, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Diameter Batang yang Dapat Dimasukkan: 26 / 32 mm Kecepatan Putaran Maks. Spindel Utama: 8.000 rpm Sumbu: X1 / Y1 / Z1, sumbu C terintegrasi di spindel utama Revolver: 1 Posisi alat: 12 Daya penggerak: 6,7 kW (100% duty cycle) / 10,7 kW (40% duty cycle) Torsi: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) RINCIAN MESIN Waktu hidup: 116.721 jam Jam operasi: sekitar 48.000 jam Kontrol: Traub TX8i-S Lhsdpfeyzxp Tjx Ac Hjk Dimensi & Berat Dimensi (P × L × T): sekitar 4,4 × 1,4 × 1,7 m Berat mesin: sekitar 4.000 - 4.200 kg PERLENGKAPAN Konveyor serbuk: sabuk engsel, tinggi pembuangan sekitar 950 mm

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Ljdpsvldx Ajfx Ac Hshk Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 725 mm, CNC control Sinumerik 840D NC rotary table, B-axis Lsdoq Ui Hqjpfx Ac Hohk Magazine for 320 tools Pallet changer unit, 2 pallets 500 mm x 500 mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive power 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and description of the machine are not binding.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment Lhodpfx Acsx D Drcj Hsk • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Lhjdpfx Acstrvzxs Hjk Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: baru, Ostas 3-Roll Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Lhedpfsg Nz T Iex Ac Hsk Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor: 4 kW Features: - Top and bottom rolls electrically driven - Swing-out top roll - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety cable, CE-marked

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right, left/30° right: 130/130/105 mm Square 90°/45° right, left/30° right: 120x120/100x100/90x90 mm Rectangular 90°/45° right, left/30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Lhedpfx Acskfp D Te Hjk Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical data, see PDF document. Technical data and dimensions: Subject to change/errors excepted.

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles max. nominal bore D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 Lhjdpfx Acjiay Sfe Hjk electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including bar loader IEMCA PRA40/37/F, year 1987 (bundle magazine) Painted in light blue and light grey Tool configuration may differ from images. Please contact us for further information and pictures via mail(at) or