Mesin bubut kepala geser CNC

Tsugami-Mori BS32(S)-III

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Fpodpsxddvnofx Adgeb Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 3.000 mm, diameter putar di atas sled silang: 520 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 3.150 mm, Diameter pembubutan 520 mm Panjang pembubutan 3000 mm Kontrol SIN 840 D Siemens Sumbu z 3150 mm Feed sumbu z 1 - 40.000 mm / mnt Gerak rapid Z-axis 40,00 m/mnt Sumbu x 600 mm Feed sumbu x 1 - 30.000 mm/mnt Gerak rapid X-axis 30,00 m/mnt Spindel utama S1 Kisaran kecepatan spindel 1 - 3.300 rpm Daya penggerak pada beban 100% 29,00 kW Kepala spindel DIN 55026 - Ukuran A11 Diameter spindel pada bantalan depan 160 mm Lubang spindel 115 mm Sumbu C 360 x 0,001° Spindel milling S2 Pemegang alat Capto C6 Kisaran kecepatan tanpa tingkat 1 - 6.000 rpm Sumbu y -100 / +150 mm Sumbu B -110 / +110° Majalah alat dengan 100 tempat Kebutuhan daya total 145 kW Berat mesin sekitar 24 t Fedpfx Adoxadk Dogjpb

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Fjdpfx Aowl An Isdgspb

Kondisi: bekas, Tahun pembuatan: 2012, en-20240619-01 Fpsdpovivx Nsfx Adgeb

Kondisi: bekas, Tahun pembuatan: 2004, en-GB_001 Fpsdstzyx Tjpfx Adgjb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Fodpfx Ajr D N Eqjdgjpb Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.160 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 650 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, produsen pengendali: FANUC, model controller: FANUC 0i-MD, tinggi total: 3.170 mm, panjang total: 5.500 mm, lebar total: 2.892 mm, lebar meja: 760 mm, panjang meja: 2.160 mm, beban meja: 1.800 kg, berat keseluruhan: 15.000 kg, kecepatan spindel (min.): 60 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 800 mm, daya motor spindle: 18 W, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Used vertical machining center “DOOSAN model DNM 750L-” with FANUC 0i-MD CNC Fsdpfxsw D Aynj Adgspb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, CNC twin-spindle turning center Control system: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter to tool turret 2: 540 mm Travel distances: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter spindle slide: 180 mm Z3 – Counter spindle slide: 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0–4000 rpm Bar capacity: 102 mm Drawtube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0–5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Fpsdpfx Adewcd S Negob Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES  Short bar loader IRCO ILS-RBK 100/16  Various main spindle reduction sleeves  NC-controlled workpiece pick-off device for main and counter spindle The unit consists of an NC-controlled: * Horizontal axis * Swivel unit * Vertical axis * 2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removal of workpieces from the machine  Coolant system 8/20 bar with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°C)  Counter spindle slide  Easy-Tool Monitor  1 collet chuck for quick-change chuck, size 100, for main spindle  1 collet chuck for quick-change chuck, size 100, Nova AxisFix for counter spindle  Approx. 40 various quick-change chuck heads, size 100 (entire stock)  Pneumatic changeover device, ø 100 mm  Approx. 50 various tool holders, static and driven (entire stock)  Mounting elements  Documentation

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, jam operasional: 132 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20731, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 90 m/menit, pergeseran cepat sumbu Y: 90 m/menit, pergerakan cepat sumbu Z: 90 m/menit, daya nominal (semu): 35 kVA, produsen pengendali: Fanuc 31I, kecepatan spindel (maks.): 42.000 rpm, jam operasional spindle: 132 h, pasokan pendingin: 20 batang, daya motor spindle: 15 W, hidung spindel: HSK E40, tegangan masuk: 415 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/- 0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist mit Renishaw OMP400 und BLUM Pico zur Werkstück- und Werkzeugvermessung ausgestattet. Die Wiederholgenauigkeit liegt bei +/- 0,001 mm. Hochgeschwindigkeits- und Hochgenauigkeitsoption auf Fanuc ist vorhanden. Die Maschine kann unter Strom besichtigt werden. Fodpfxovcfi Dj Adgspb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1091950, de Fedpfst Dmmvsx Adgjpb