Sistem pengelasan pipa

Uhrhan & Schwill Außenschweißen

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine Gijdoga T E Ajpfx Abhjn * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Tahun pembuatan: 1981, Kondisi: siap digunakan (bekas), Working width: 2500 mm, max. sheet thickness: 20 mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable top rolls down to a minimum diameter of 450 mm, machine overhaul in 2009, factory inspection in 2012. Gedpjnvfdbefx Abhjin

Kondisi: baru, Semiautomatic band saw for high-performance and highly precise cutting of medium-sized solid bars and profiles. Gedpfjfibd Tsx Abhoin The robust construction provides the machine with the necessary rigidity and cutting unit precision. Band operation is via a two-speed motor and a special reduction gear with bronze gear and tempered, ground worm screw. Flywheels are appropriately dimensioned. Sturdy band guides made with sealed ball bearings and adjustable carbide (Widia) plates. Blade tension is achieved by an electromechanical device with a micro-switch blade rotation control. Safety devices are installed on the flywheel covers and the blade for operator protection. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repeated cuts to the same length Band cleaning device with brush Hydraulic power unit motor: 0.37 kW Electric pump for band coolant: 0.09 kW Vice jaw height: 200 mm Vice jaw length: 185 mm Worktable height: 760 mm Machine weight: 820 kg

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Protec KT 300 H Welding Turntable, 170/400 Special Version Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Godpfx Ajrypmgobhsin Table height: 500 mm Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional)

Kondisi: baru, nl->en Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05° Tube length ----- 1,350 ∞ mm Weight ----- 2,200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0–850°/sec Length feeding ----- Standard 0–2,400 mm/sec Booster ----- 0–1,200 mm/sec Degree of tolerance ----- 0.05°/mm Bending head rotation ----- 0.75 sec Standard components conform to VDMA, ISO, and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with freely programmable robot or loading arm Gisdpfxoga T Exe Abhon * Weld seam detector and tube positioner (electromagnetic or optical detection) * Free-form radius bending * Simulation/Collision Control * Bed length extension

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Giedped Du T Iefx Abhjn Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade • Workpiece stop • Base frame • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Kondisi: baru, The NEOMIG-i 500 G is a three-phase, multi-process welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergy functions simplify setup and reduce spatter during welding. Equipped with the WF wire feeder, it provides precise control over welding parameters to guarantee perfect quality. MULTI-PROCESS MIG/MAG: Gisdpfxjmxkdpo Abhon - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (polarity reversal): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Gisdpfeg U Uv Rsx Abhen Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, model controller: 4 axis with digital readout, jumlah rol: 4, diameter rol atas: 360 mm, diameter roll samping: 320 mm, diameter rol: 400 mm, panjang rol: 3.050 mm, lebar kerja: 3.000 mm, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 26 mm, berat keseluruhan: 17.400 kg, panjang total: 5.500 mm, lebar total: 2.010 mm, tinggi total: 1.900 mm, daya: 18,5 kW (25,15 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, rol yang dikeraskan, pl_bending_machine_specs Giodpfx Aoxqyxlebhsn

Kondisi: baru, Tahun pembuatan: 2025, New machine. Please inquire for the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Connection voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Gijdpsrah S Hsfx Abhjn Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Capacities: Cutting capacity 0° round (solid material): 355 mm Cutting capacity 0° square (solid material): 300 mm Cutting capacity 0° rectangle vertical (solid material): 300 x 490 mm Cutting capacity -45° round (solid material): 290 mm Cutting capacity -45° square (solid material): 250 mm Cutting capacity -45° rectangle vertical (solid material): 250 x 250 mm Cutting capacity +45° round (solid material): 350 mm Cutting capacity +45° square (solid material): 290 mm Cutting capacity +45° rectangle vertical (solid material): 290 x 340 mm Cutting capacity +60° round (solid material): 230 mm Cutting capacity +60° square (solid material): 180 mm Cutting capacity +60° rectangle vertical (solid material): 180 x 220 mm