Gergaji

Ulmia 1210 S

Kondisi: baru, Tahun pembuatan: 2025, Maximum Ø 114 mm; Straight and bent round tubes; One grinding station; Grinding of straight and curved round tubes up to Ø 114 mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system enables belt grinding without rotating the tube, delivering the best results. The feed system safely transports straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 – 114 Number of stations: 1 Rbsdpfot Eaw Djx Abuet Abrasive belt dimensions (mm): (2x) 50 x 940 Belt speed (m/s): 3 – 22 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Total power (kW): 4.5 Power consumption (A): 11 Dust extraction port (Ø mm): 80 Dimensions (mm): 750 x 1000 x 1300 Weight (kg): 250

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed Rsdpfohgihkox Abuobt - Fully enclosed table - The ZOPF design allows quick tool changes without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high load - With the universal tool holder and various tools, you can work with exceptional flexibility.

Kondisi: baru, Saw blade diameter: 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160 x 90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80 x 100 mm Total power requirement: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts to the right and left up to 45°, positive stops at 90° and at 45° left Redpfsd Iin Tsx Abusbt • Suitable for sawing steel, stainless steel, and, with limitations, aluminum profiles • Vise with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Hardened steel cone safety clutch to protect the saw blades • Large heavy-duty cast base plate for maximum stability and low-vibration operation • Two speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty use • Automatic blade cooling system • Double-supported saw head • 24 V safety switch integrated into the handle with restart protection • Length stop, assembly tools ATTENTION: Price is WITHOUT saw blade!!!

Kondisi: bekas, jarak tempuh: 452.000 km, daya: 95,61 kW (129,99 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 4x2, Tahun pembuatan: 2010,

Kondisi: sangat baik (bekas), jarak tempuh: 28.919 km, daya: 338 kW (459,55 hp), pendaftaran pertama: 11/2015, jenis bahan bakar: diesel, konfigurasi gandar: 10x4, jarak roda: 5.100 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 500 l, rem: pengereman mesin, warna: merah, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2015, jam operasional: 1.219 h, Perlengkapan: ABS, derek, filter jelaga, kendali jelajah, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: sangat baik (bekas), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) composed of: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - Left side cut 45° - Drilling - Cut 90° - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Model Teknomat 3000 Rbsdpoqwyclsfx Abujt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1974, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 74-4-10, ALTENDORF F90 panel saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer: Altendorf, Germany Saw length: 2600 mm Cutting width: 1,300 mm Max. cutting height: 130 mm Max. saw blade diameter: 400 mm Main motor: 5.5 kW Redpfxoipvrbj Abusbt With scoring unit 4 speed settings Saw blade height adjustment: manual Approximate weight: 780 kg Technical data subject to change

Kondisi: bekas, Tahun pembuatan: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-position tool turret VDI40 - Year of manufacture: 2003 Technical Specifications Capacity: - Centre height: 200 mm - Distance between centres: 1000 mm - Max. admissible diameter over bed: 400 mm - Max. admissible diameter over cross slide: 370 mm - Max. admissible diameter over compound rest: 210 mm - Bed width: 300 mm Headstock: - Main spindle bore: 65 mm - Main spindle nose: Camlock No. 6 / DIN 55027-No. 6 - Spindle taper: Morse Taper 5 - Spindle speeds: 2 ranges - Constant cutting speed: 0-700 / 700-3000 rpm Feeds: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock quill diameter: 58 mm - Tailstock quill travel: 155 mm - Tailstock taper: Morse Taper 4 Motors: - Main motor power: 7.5 kW - DC motor power Z-axis: 12 Nm - DC motor power X-axis: 4 Nm - Coolant pump motor power: 0.57 kW Dimensions: - Machine weight: approx. 2,200 kg - Dimensions (W x H x D): 2,980 x 1,730 x 1,610 mm Rodpfx Asuwrz Hjbujbt

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate Redpfju Uvalox Abuobt for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Kondisi: baru, Tahun pembuatan: 2025, Pressure: 40 t Stroke: 250 mm Table size: 625 x 1100 mm Flat bar (flat): 200 x 20 mm Maximum pipe diameter: 2" Table height: 950 mm Working speed: 9.1 - 4.7 mm/sec Return speed: 45 mm/sec Machine weight: approx. 750 kg Space requirement: approx. 1.25 x 0.9 x 1 m Total power requirement: 3 kW Oil capacity: 45 l New hydraulic horizontal bending press with 4 advantages over other manufacturers: 1) Infinitely variable pressure adjustment UNDER LOAD with handwheels 2) UNDERSLUNG cylinder for 360° bending! 3) Operation from the front, not the side 4) Patented tapered tool holder Rjdpfxevx Dwrs Abuobt Additionally, immersion depth and return point can be set by handwheel, along with stepless feed adjustment. Machines also available in the following sizes: press force from 22 to 150 t, stroke from 200 to 450 mm, also optionally with 2-axis control (immersion depth + side stop). A comprehensive range of tools for a wide variety of applications available on request. SIMASV bending presses have been quality machines since 1957.