Sabuk konveyor berlubang untuk barang curah

unbekannt 500x10000

Kondisi: baik (bekas), Tahun pembuatan: 1999, Briket Press Tipe GP 120 Tandem Mesin press briket untuk briket serbuk, serpihan, dan debu termasuk sensor level otomatis - Diameter briket: 60 mm - Kapasitas tekan: 40 - 120 kg/jam * 2 = 80 - 240 kg/jam (tergantung material) - Buka hopper: sekitar 1.900 x 1.900 mm - Tinggi hopper: sekitar 1.800 mm - Kapasitas hopper: sekitar 6,0 m³ - Daya motor: 7,5 kW, 400 V, 50 Hz - Panel kontrol: tersedia di kedua sisi - Jam operasional: 13.725 jam atau 13.005 jam - Unit hidrolik: tangki sekitar 300 l untuk oli hidrolik - Berat: sekitar 1.100 kg * 2 = 2.200 kg Briket press bekas dalam kondisi baik Silinder penjepit model W, penjepit (RB 120 diperkuat), flensa sambungan penjepit telah diganti di satu sisi (kiri dalam arah konveyor) pembakaran briket | mesin briket | press briket | mesin press briket | briketisasi Fjdpfx Aeupwx Heagsfw

Kondisi: baik (bekas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Total length: 26 meters 1st bin: 2 meters Ffjdpfx Asgw Scqoagew 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.

Kondisi: baru, en1 Fodeggx E Dopfx Aagsfw

Tahun pembuatan: 1978, Kondisi: bekas, Pressure 100 t Throat depth 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram area 600x500 mm Table area 720x600 mm Machine weight approx. 9 t Ffedpfx Aaslp U Dpogjw Two-hand operation, Stroke and pressure shut-off, Pressing time

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Fjdpexdc Uvefx Aagsfw

Kondisi: sangat baik (bekas), SK 50 tool holders (28627) various manufacturers: Bilz Kelch Sandvik Clarkson Ffjdswl U Tcopfx Aagsw approx. 90 pieces

Kondisi: sangat baik (bekas), The plant essentially consists of: - 2 feed units (walking floor bunkers) - 2 silos, each with 55 cbm capacity, equipped with discharge screws - 2 screw conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel-connected twin-shaft extruders for the disintegration of woody biomass Ffsdpfjlxzl Eox Aagow - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing equipment for liquid extracts

Kondisi: baru, Tahun pembuatan: 2026, en-001 Ffedexk Tg Njpfx Aagow

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 76 kW (103,33 hp), jenis bahan bakar: diesel, berat keseluruhan: 16.500 kg, Tahun pembuatan: 2008, jam operasional: 11.580 h, Perlengkapan: kabin, kunci diferensial, palu hidrolik, pendingin udara, penggerak semua roda, Komatsu PW130-7K excavator beroda, tahun 2008 dengan 11.580 jam kerja, kondisi bersih, berat total yang diizinkan 16.500 kg, dilengkapi blade penyangga, 76 kW, transportasi dan pengiriman tersedia. Inspeksi dapat dilakukan sesuai kesepakatan, juga tersedia pada akhir pekan. Ffsdpfxsx Iht Ie Aagjw

Kondisi: baru, Hydraulic winch for log splitters, cranes, mini excavators, tractors, vineyard and horticultural equipment, and many other applications. The hydraulic attachment winch can make numerous tasks easier for you. Fjdpfx Asdf Ud Ssagefw - Pull firewood to the log splitter and set it up - Pull logs onto trailers - Remove stumps and trees - Use as auxiliary winch for forwarding cranes and small excavators - Use as winch for small tractors and narrow-track tractors A robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes offers a variety of attachment possibilities for the winch (threads are cut and painted; for corrosion protection, they must be cleaned with a tap before use). Fitted with a 20 m long, 6 mm thick steel cable. Large cable drum ensures long service life for the steel cable. We install hydraulic motors ranging from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force you require. Maximum working pressure: 225 bar (peak) Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm (peak) Torque in continuous operation: 380 Nm Maximum pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolting or welding. This version is supplied with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Images 2, 3, and 4 show installation examples!