Tungku vakum

unbekannt T500/B400/H400 mm

Kondisi: baru, KO_EB_2024_06 Dksdsipvgijpfx Abhsh

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), A 3-axis precision milling machine DMG Mori is available. Travel range X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An inspection on site is possible. Djdpfx Absvi N D Sehekh

Tahun pembuatan: 2007, Kondisi: bekas, nomor mesin/kendaraan: 46650051, Horizontal machining center with multipallet + B39 NIIGATA SPN 501-P8 FANUC 18I-MB Accessories: Chip conveyor High-pressure cooling system through the spindle line Dksdpfx Ajgay Evebheh

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: Djdpfx Abjt Hw Nyjhekh • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel path X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel path: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5,000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2,500 [mm] - Max. workpiece height: 1,850 [mm] ELECTRICAL SUPPLY Dedpsw Ephbofx Abhskh - Supply voltage: 400 [V] - Total drive: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] OPERATING HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinsing gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probe system - Workpiece probe system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vice - Tool holders

Kondisi: bekas, Tahun pembuatan: 2000, Table length: 1160 mm Table width: 710 mm Passage: 650 mm Control unit: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirement approx.: m WENZEL CNC-controlled vertical 3D coordinate measuring machine Type: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer Y-axis as longitudinal traversing measuring bridge: 600 mm X-axis as cross traversing measuring head carriage: 500 mm Z-axis as vertical measuring quill approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Clearance under measuring bridge approx.: 650 mm Usable table size overall approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, crossbeam and quill made of dark natural hard stone; table fitted with 3 x 4 threaded holes for clamping workpieces/fixtures • All axes are air-bearing and thus extremely smooth-running, virtually wear-free, and equipped with incremental scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type ME 5007 for 3 to 6 axes with ME 4700 mobile hand control panel with 2 joysticks, enabling full access to all software functions—ideally equipped for: • WENZEL measuring software Type METROLOG – II Level 2 for measurement of standard geometries, graphical 3D workpiece display, graphical protocols, etc., including keyboard • RENISHAW control unit Model PHC 10 – 2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, including RENISHAW Probe Interface PI 200 Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on table • Calibration sphere for table setup, worktable with console, various clamping devices • Various cassettes and several CDs with different software. Separate PC for measuring software and printer Condition: Very good – generally in stock, powered up for inspection, demonstration-ready, dismantled by a metrology specialist at previous owner and reassembled here. Delivery: From stock – as seen and inspected Payment: Net – upon receipt of invoice. Dodpfst Hw S Ijx Abhjkh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Mikroskop elektron pemindai tipe Zeiss XB 350 Dkedpfx Abow Rdvvjhjh Perlengkapan & Aksesori • tanpa kolom FIB • Perangkat lunak SmartSEM dan SmartFIB • GIS dengan prekursor Pt • Pembersih plasma terintegrasi • EDX Oxford Xplore 30 (termasuk antarmuka & perangkat lunak) • Ruang kunci otomatis 200 mm • Penghubung listrik (2 x 15 saluran) • Pendingin sirkulasi • Tangki buffer vakum Mode Tenang • ... juga meja, monitor, konsol kontrol (keyboard & joystick Zeiss eksklusif) serta berbagai holder sampel Penempatan: Agustus 2024 Lokasi: Mainz Ketersediaan: tersedia dalam waktu singkat sesuai kesepakatan. Perangkat masih beroperasi dan dapat dilihat serta didemonstrasikan. Perangkat dalam kondisi prima tanpa kerusakan ataupun cacat dan berfungsi sepenuhnya. Informasi lebih lanjut tersedia atas permintaan!

Kondisi: baik (bekas), Tahun pembuatan: 2008, - Maximum turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full-stroke cylinder for partial hollow clamping, maximum draw tube bore Ø 100 mm - In-process measuring system Renishaw for X/Y/C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115/-115 = 230 mm Dedpfx Asxmirgebhekh - B-axis 225°, positioning in 0.001° - ICS / Internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° - Hobbing software for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Technical data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt or fuse materials together. The laser welding cell consists of a fiber laser with a 6-axis industrial robot, which moves on a travel rail. The parts to be welded are clamped onto a rotary-tilt table. The safety enclosure is equipped with a sliding door, ensuring safe operation. Robot: Type: M-710iC/50 (FANUC) Robot control: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: fully enclosed Robot travel rail: Length: 1500 mm Travel speed: 60 m/min Repeatability: ±0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotational axis: ±720° Tilting axis: ±90° Resonator: Beam source: YLS4000-S2T Wavelength: 1070 - 1080 μm Laser power: 4 kW Control: Type: Amada Display: 15" LCD color touchscreen Controlled axes: robot and linear axis Coordinates between robot and beam source Memory: 3 MB SRAM I/O interface: LAN, USB Welding head: Amada Focal position control: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving system: The integrated rotating optics allow the laser beam to orbit. The patented system by AMADA enables welding of larger gap dimensions with or without filler material, and even aluminum can be welded. Dksdpfx Ajxndynobheh NC focus system: The NC focus system automatically sets the optimal focal position for each welding condition. It equally facilitates welding of simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be carried. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates tedious manual teaching operations. Deviations between the programmed and actual seam path are detected by a CCD camera. Condition: Very good condition. Machine has been used very little: approx. 16,500 hours. The seller assumes no liability for typing or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Heidenhain digital readout Dsdpfxjwkrp Es Abhokh Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis 110 mm Travel of machine head 450 mm Table to spindle nose 0 – 527 mm Quick-change system SF 32 Work spindle 2.9 kW Steplessly adjustable speed range 50 - 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space requirement (W x D x H) 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg