Ujung sentris

UNBEKANNT Zentrierkegel

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 690 mm, lubang spindel: 150 mm, diameter pembubutan: 1.040 mm, diameter pembubutan di atas carriage atas: 690 mm, tinggi pusat: 500 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 380 mm, saluran batang: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross-slide: 690 mm Over bed: 1,040 mm In natural gap: 1,070 mm Bed width (hardened guideways): 670 mm Gap length: 480 mm Gap length in front of platform: 320 mm Kdodjyhhuwspfx Apvsl CARRIAGE Bed guide length: 1,020 mm Cross-slide travel: 640 mm Top-slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing size NNU: 190/260/69 mm Internal Morse taper in reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 – 800 rpm THREAD CUTTING Total threads: 398 Metric threads: 0.5 – 224 mm Module threads: 0.25 – 11 mod. Whitworth threads: 56 – 1/8 TPI DP (Diametral Pitch) threads: 112 – 1/4 DP FEEDS Number: 108 Longitudinal, cross, and top-slide: 0.05 – 22.4 mm/rev RAPID TRAVERSE Longitudinal, cross and top-slide: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 – 500 mm Carriage steady rest capacity: 40 – 350 mm PERMISSIBLE LOAD Overhang: approx. 1,500 kg Between centres, without steady rest: approx. 5,000 kg Between centres, with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 45.000 W, tinggi total: 2.120 mm, berat keseluruhan: 11.500 kg, produsen pengendali: SIEMENS, model controller: 810 D, panjang produk (maks.): 5.400 mm, jumlah sumbu: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it is equipped with a robust main drive rated at 45/37 kW. This machine is ideally suited for heavy-duty turning work and comes with accessories such as a chuck, a faceplate, and a steady rest. Contact us for further information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm Kdedsx D Hz Tspfx Apvel • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed carriage guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gearbox stage 1: 1-280 rpm • Speed range gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill taper: MK 6 • Dimensions and weight of the machine: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul Work Performed: • Hardening and grinding of all bedways • Grinding of tailstock ways • Overhaul of the complete bed and cross slide assembly (grinding/scraping of all guides) • Renewal of bed carriage slideways • Renewal or shimming of keyways and ground guides • Replacement of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of the main spindle motor • Inspection of auxiliary motors (X and Z axis) • Refurbishment of existing safety guards (sliding hood/chuck guard) • Replacement of all rotary, cam, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the working area • Replacement of centralized lubrication system • Renewal of energy chains • Painting as specified (standard structural basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional Equipment • 1x used 630 mm diameter chuck with various jaws • 1x used 1100 mm diameter faceplate • 1x used steady rest, max. 300 mm diameter • 1x used chip conveyor

Kondisi: bekas, Tahun pembuatan: 2006, en-GB: Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Centre distance: 850 mm Longitudinal travel (Z-axis): 900 mm Cross travel (X-axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x steps rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X-axis): 8 m/min Longitudinal travel (Z-axis): 10 m/min Operating hours (power on hours): approx. 34,600 h Tailstock taper ISO: MK 5 Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions (LxWxH) approx.: 2.2 x 3.2 x 1.9 m Multifix tool holder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Live centre in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with inner jaws Various chuck keys Machine lighting 8x base plates 4x wedge lifters Various pairs of jaws 1x closed steady rest Ø 100 mm Kedpfxewtct Hs Apvodl

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Swing diameter: 830 mm Turning length: 4,000 mm Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Kdjdpfxowwlt Ro Apvol Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Kondisi: bekas, Technical Details: Swing diameter over bed: 830 mm Swing diameter over cross slide: 540 mm Turning length: 3000 mm Swing diameter over support: 540 mm Distance between centers: 3000 mm Faceplate diameter: 800 mm Rapid traverse X-axis: 4 m/min Control: MTC K (Monforts) Speed range: 2 - 1,600 rpm Spindle bore: 88 mm Tailstock quill taper: ISO MK6 Tailstock quill stroke: 200 mm Max. workpiece weight between centers: 1,250 kg Max. workpiece weight - unsupported: 3,000 kg Swing diameter in gap: 1,200 mm Gap length: 310 mm Machine weight approx.: approx. 6.85 t (without chip conveyor and coolant tank) Machine dimensions approx. LxWxH: 2.55 x 1.1 x 1.29 m CNC cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting via calculation interpolator of the NC control Chip conveyor manufacturer: Kabelschlepp Kdedowmlknopfx Apvsl Three-jaw chuck D=500mm without clamping jaws Various accessories

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 435 mm, lubang spindel: 70 mm, panjang pembubutan: 1.500 mm, diameter pembubutan: 640 mm, lebar di tengah: 1.500 mm, diameter pembubutan di atas alas geser: 640 mm, diameter ayun di atas peluncur silang: 435 mm, gores kuas bulu: 190 mm, diameter quill: 100 mm, jarak gerak quill: 190 mm, tinggi pusat: 320 mm, gerak cepat sumbu X: 5 m/menit, pergerakan cepat sumbu Z: 5 m/menit, diameter ayun di atas peluncur melintang: 640 mm, kecepatan spindel (min.): 3 rpm, kecepatan spindel (maks.): 2.500 rpm, panjang pemakanan sumbu X: 365 mm, panjang umpan sumbu Z: 1.500 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, lebar tempat tidur: 1.800 mm, berat benda kerja (maks.): 1.600 kg, jenis arus masuk: AC (pendingin udara), jarak pergerakan landasan silang: 365 mm, kecepatan rotasi (min.): 3 rpm, kecepatan rotasi (maks.): 2.500 rpm, diameter chuck tiga rahang: 315 mm, torsi: 640 Nm, jarak pergerakan sumbu X: 365 mm, jarak gerak sumbu Z: 1.500 mm, berat benda kerja di antara senter: 1.600 g, diameter spindel: 100 mm, diameter benda kerja antara pusat: 640 mm, jarak antara pusat: 1.500 mm, panjang benda kerja di antara senter: 1.500 mm, diameter luar chuck: 315 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide/top slide: 365 mm / 145 mm Centre height over flat bed: 320 mm Kdsdpfowywxdox Apvel Distance between centres: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Tool post cross-section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (total): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed speed transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Thread pitches metric: 0.1–400 mm Quill Ø / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Tailstock centre diameter: Ø 150 mm Workpiece weight (max.): Between centres, unsupported: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4″ colour LCD, display includes speed, feed, position, tool, and load information

Kondisi: bekas, Tahun pembuatan: 1990, Grinding length: 900 mm Grinding width: 510 mm Workpiece height: 400 mm Clamping surface of table: 800 x 400 mm Maximum longitudinal table travel: 980 mm Table speed – stepless: 1 - 35 m/min Grinding wheel dimensions: 355 x 51 x 127 mm Cross table travel: 460 mm Cross feed: 1 - 40 mm/stroke Automatic vertical feed: 0.005 - 0.04 mm/stroke Rapid vertical traverse: 0.5 m/min Grinding spindle speed: 1,450 rpm Grinding spindle drive: 5.6 kW Maximum table load: 1,000 kg Total power requirement: 10 kW Machine weight approx.: 4.4 t Accessories: Magnetic chuck 800 x 400 mm, various grinding wheels with and without flange, coolant system with paper band filter Kjdpfx Apstqqm Ajvodl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, drehwerte2024-01 Kodpfx Apeyiu T Ajvjdl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Year of manufacture: 2004 Sauter 8-position turret VDI 20 + driven tools at all stations Main spindle holding brake C-axis with interpolation Reinforced coolant pump: 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA colour screen Working Area & Capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Centre distance: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (to DIN 55027) / Taper MK 6 Drive power (AC): 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (in 2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & Axes Rapid traverse (X/Z): 8 / 10 m/min Feed rate: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool Carrier & Tailstock Turret: 8-position disc turret (Sauter), all stations powered Driven tool speed: up to 6,000 rpm (3.8 kW) Tool system: VDI 20 (DIN 69880) Tailstock: quill diameter 70 mm, stroke 120 mm, taper MK 5 Kjdpfxoy Dckae Apvjdl Dimensions & Capacities Dimensions (LxWxH): approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 litres Fixed steady rest with rollers, guiding diameter 10–115 mm Travelling steady rest with rollers, guiding diameter 10–115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-clamping chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, including speed monitoring with separate adjustable speed control. Tooling equipment: fixed tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used for single-part production in prototype manufacturing. Very low spindle hours Immediately available.

Kondisi: bekas, Tahun pembuatan: 2001, Diameter chuck: 250 mm Diameter putar di atas tempat tidur: 500 mm Diameter putar di atas eretan: 290 mm Jarak antara senter: 850 / 1350 mm Kontrol: Heidenhain Berat mesin kira-kira: 2700 t Kebutuhan ruang kira-kira: 2900 x 1953 x 1825 mm Kedsw Syc Iopfx Apvodl Banyak aksesori Dua dudukan tetap (steady rest) Penukar alat rusak