Mesin las multi-kepala

Urban AKS 4110

Kondisi: baru, Tahun pembuatan: 2026, Ganz gleich, welche Schnittaufgabe Sie haben – die A700 ist die einzige Säge, die Sie jemals benötigen werden. Mit der größten Schnittkapazität ihrer Klasse und einem enormen Gehrungsbereich von ±75° ist sie für echte Hochgehrungsschnitte ausgelegt, ohne Kompromisse bei der Größe der zu schneidenden Aluminiumprofile einzugehen. Ideal auch für das Bündelschneiden mehrerer Profile gleichzeitig und hochpräzise. Hochgeschwindigkeits-Aluminiumverarbeitung mit präzise geregelten Bewegungsabläufen durch eine PLC-Steuerung. Pneumatisch betätigte Schutzhaube, die sich per Knopfdruck öffnet und schließt – für einen vollständig freien Zugang zum Sägetisch. Sicherheitsschalter, der die Säge beim Anheben der Haube deaktiviert. Optional CNC-gesteuerte Gehrungseinstellung der Säge mit Touchpad-Bedienung. • Ø700 mm Hartmetall-Kreissägeblatt mit 4 kW Antriebsmotor • Nach AS / NZS 4024:2014 Sicherheitsstandard, Zweihandbedienung beim Sägeschnitt • Überkopf-Schutzhaube mit Sicherheitstunneln, jeweils 900 mm beidseitig der Säge • Schutzhaube pneumatisch auf Knopfdruck anhebbar • Sicherheitsschalter schaltet den Sägebetrieb beim Anheben der Haube ab • 2x vertikale und optional 2x horizontale Spannzylinder mit einstellbarem Spannungsdruck • Gehrungsbereich ±75° mit Rastpunkten bei 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Dosier-Schmiersystem für das Sägeblatt • Luftdüse und LED-Innenbeleuchtung • 2× Ø100 mm Anschlussstutzen für Späneabsaugung • Optional 2,2 kW Späneabsauganlage Podpfx Aemb U Tuediepw • Optional automatisches Gehrungseinstellsystem Besonders geeignet für: • Serienfertigung von Aluminium • Herstellung von gehrungsverschweißten Aluminiumkonstruktionen • Herstellung von Fenstern und Türen • Fertigung von Rollläden, Jalousien und Möbel • Herstellung von einbaufertigen Aluminiumrahmen und -konstruktionen • Produktion von Aluminiumfassaden

Kondisi: baru, Tahun pembuatan: 2026, Mini crane on crawler chassis TB5000 Mini crane on crawler chassis for indoor and outdoor applications. Maximum load capacity: 2,400 kg. * Radio remote control – driving, operation, outriggers * Dual power supply – diesel and 230 V electric * Maximum load capacity – 2,400 kg * Standard overload protection system * Maximum horizontal outreach over 11 m * Four hydraulic extensions + 1 manual extension * Maximum vertical reach over 13 m * 4 hydraulically lowerable supports * Weight approx. 2,200 kg * Height approx. 195 cm * Width approx. 88 cm * Active boom angle 16 degrees Additional optional equipment: * Search hook * Hydraulic winch, 990 kg * Operation with lithium-ion battery * Pads for support legs * Hydraulic fly jib Pjdpfoibqrasx Adiepw Available in the color of your choice.

Kondisi: bekas, Tahun pembuatan: 2020, Maximum workpiece length: 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control system: CNC Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of client ----- - From a timber window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, see PDF for full details): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Psdpfx Ajyq Sztedijpw Z = 350 mm clearance height (from console level), depends on clamping system, see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 – 24,000 rpm - Additional locking system for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) Horizontal drilling unit with 6 spindles, 4 spindles in X direction and 2 spindles in Y direction. 1 grooving saw in X direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right of the machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Tool change station for circular saw blade mounted on the cantilever/tool changer, Max. saw blade diameter 350 mm - Tool changer on the left of the machine frame with 10 tool positions. Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the cantilever, travelling in the X direction Max. tool diameter 240 mm Max. tool height 370 mm - Moving pick-up position for chip deflector - 6 workpiece supports, s-motion, position controlled - 2 machining fields for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved element machining - Includes all existing solid wood clamps and vacuum suction pads - Automatic central lubrication - CE safety equipment - “WoodFLash” software Lamello Clamex P Macro Cut-out Macro - “Greenline package” for reduced energy consumption ----- Price for the above machine on request! ----- Optional new Oppold tool set for H500: -Windows Timber windows IV 68, 78, and 88 inward-opening, with changeable rebate at the sides and top. Glass rebate 20 mm, frame and sash side 20° beveled with loose and pre-machined glazing bead Old building timber windows IV 68, 78, and 88 inward-opening, without rain rail, with changeable rebate at the sides, top, and bottom. Glass rebate 20 mm, frame & sash side 15° beveled Removable weather board Timber-aluminium window (System supplier: Gutmann Mira, bevel rebate system) HA IV 68, 78, and 88, inward-opening, 2 sash variants: square and bevelled, Changeable rebate at the bottom, sides, and top -Entrance door Timber HTIV 68, 78, and 88 with single rebate in the frame and double rebate in the sash inward-opening, 1 sash variant, glass rebate, without changeable rebate Offset construction Timber-aluminium IV 68, 78, and 88 with single rebate in the frame and double rebate in the sash -Lift and slide door Timber HS IV 68, 78, and 88, without frame production Timber-aluminium HS IV 68, 78, and 88, without frame production Execution...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, frekuensi input: 50 Hz, tegangan masuk: 400 V, tekanan: 6 batang, LiSEC, KSR-25, right-left operation, year of manufacture 2010 Vertical glass seaming line, height=2.50 m In fully automatic operation, the compact grinding machine seams the edges of glass panes on all four sides. Inspection during production possible by appointment. In very good working condition. Available: March / April 2025 Ppsdpfx Adov Eguyeiow

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. Ppedpfx Adju R Szaoisw - New exhibition machine -

Kondisi: bekas, Tahun pembuatan: 1973, Swing diameter over bed: 490 mm Swing diameter over cross slide: 280 mm Turning length: 2,000 mm Centre height: 245 mm Distance between centres: 2,000 mm Spindle bore: 62 mm Total power requirement: 7.5 kW Machine weight approx.: 3.5 t Machine dimensions (L x W x H): 3.78 x 1.17 x 1.42 m Ppjdpfx Aotqqvvodisw Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX tool post, fixed steady, coolant system

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 712520122, FRUMECAR ECA 3000 vollmobile Betonmischanlage Zustand: NEU Leistung: 120 m³/h Mischer: Sicoma MAO Mischergröße: 3 m³ Zementsilos: 2 x 55 t Garantie: 1 Jahr ab Inbetriebnahme Weitere Maschinen und Mischanlagen finden Sie auf unserer Website Weitere Informationen Einsatzzweck: Bauwesen Verarbeitbares Material: Beton Allgemeiner Zustand: Sehr gut Ppedpehd Na Usfx Adijw Technischer Zustand: Sehr gut Optischer Zustand: Sehr gut

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Podpfxjvwbp As Adijpw

Kondisi: baik (bekas), Tahun pembuatan: 1994, Molecular filling unit / diagonal filling Pedpfx Adsir Efuoiepw Weight 520 kg

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements Pjdpfsiidm Nex Adiopw - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -