Perangkat pemutar wadah

UWM 5000

Kondisi: baru, Semiautomatic band saw for high-performance and highly precise cutting of medium-sized solid bars and profiles. The robust construction provides the machine with the necessary rigidity and cutting unit precision. Hodpfx Aofibd Tsbhsnh Band operation is via a two-speed motor and a special reduction gear with bronze gear and tempered, ground worm screw. Flywheels are appropriately dimensioned. Sturdy band guides made with sealed ball bearings and adjustable carbide (Widia) plates. Blade tension is achieved by an electromechanical device with a micro-switch blade rotation control. Safety devices are installed on the flywheel covers and the blade for operator protection. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repeated cuts to the same length Band cleaning device with brush Hydraulic power unit motor: 0.37 kW Electric pump for band coolant: 0.09 kW Vice jaw height: 200 mm Vice jaw length: 185 mm Worktable height: 760 mm Machine weight: 820 kg

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Protec KT 300 H Welding Turntable, 170/400 Special Version Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Hnjderypmgspfx Abhoh Table height: 500 mm Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional)

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Hnedpfxod Du T Is Abhsh Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade • Workpiece stop • Base frame • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you. Hnedpsqakbrofx Abhoh

Kondisi: baru, The NEOMIG-i 500 G is a three-phase, multi-process welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergy functions simplify setup and reduce spatter during welding. Equipped with the WF wire feeder, it provides precise control over welding parameters to guarantee perfect quality. MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm Hnjdomxkdpjpfx Abhsh - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (polarity reversal): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), The roller stand is also available for rental (including trial rental). Maximum load: 100 t per set, consisting of 1x drive unit and 1x idler unit Workpiece diameter: 500 – 7,500 mm Hnedpfx Ajmk Iktobhjh Rotational speed: approx. 130 – 1,250 mm/min Roller material: polyurethane Control: wired hand pendant Additional available options, e.g.: additional idler units, foot switch

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Rotational speed: 0.03 - 1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Hodpfx Absfxgp Uohjnh Welding current transfer: 800 A

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Hjdeg U Uv Repfx Abhjnh Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Tahun pembuatan: 1984, Kondisi: bekas, Max. Schleifdurchmesser: 40 mm Min. Schleifdurchmesser: 5 mm Gewicht: 0,9 t Lieferumfang: - 2 Schleifscheiben mit Flansch - 8 Spannzangen - 1 Kühlmittelbehälter - Mechanischer Vorschub mit Festanschlag Hinweis: Die Gelenkwelle für den Werkstückantrieb ist ausgeschlagen. Hjdpfocq Rv Usx Abhonh

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 16.700 h, Fungsionalitas: berfungsi sepenuhnya, We are selling our plasma cutter from MicroStep. Should you be interested in the machine, we will gladly provide you with detailed technical data. Below you will find the machine configuration as per our original order confirmation: 1. MasterCut Compact Series | Guiding Machine Technical Data: Machine type: MasterCut Compact 3001.15Prk Machine number: 2534 Cable carrier side: left Working area: 3,000 x 1,500 mm Permissible sheet thickness: robust construction for material thicknesses up to 100 mm Hnedpfow I Sunjx Abhoh Guides/Drives: high-quality linear guides and backlash-free drive on both sides Axis control: digital, maintenance-free AC servos with IRC Positioning speed: up to 40,000 mm/min Measuring system: IRC 2500 (incremental encoder) MicroStep® CNC control iMSNC with integrated network card One LCD operator unit on the gantry Laser pointer with automatic offset transmission iMSNC® module | Expert system iMSNC® module | Program loading assistant - Page 2 of 3 - iMSNC® module | Automatic calibration of mechanical probing Module “THC” | Automatic height control via arc voltage 2. Cutting table with sectional extraction | 3,000 x 1,500 mm 3. Grate cover in the cutting table | 3,000 x 1,500 mm 4. USB 3.0 interface for external storage 5. MicroStep RemoteDiagnostics® remote maintenance module 6. Torch support | fully automatic 7. HiFocus 161i neo plasma source by KJELLBERG with automatic gas console and Contour Cut Speed technology 8. Module for control of the automatic gas console HiFocus 161i neo 9. CNC interface for HiFocus 161i neo | Integration into CNC control 10. TEKA Eco75 filter system – 7.5 kW with control unit 11. TEKA spark pre-separator TK-FVS 7000 – 12000 12. Remote control for filter system 13. Second hard drive with mirrored data (RAID system) 14. "MasterCut" plasma rotator with fully automatic support 15. ACTG® – automatic calibration unit for the bevel unit 16. ACTG® calibration report 17. AsperWin Basic CAM software for programming (single-user license) 18. AsperWin BevelCut module for bevel cutting (single-user license)