Mesin pembuat mitra

V. Grum-Schwensen Puhlmatic RPA 2000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, 4 kecepatan putar 3000/4500/6000/9000 rpm. Putaran kanan/kiri. Panel kontrol di atas. Perpanjangan meja dan permukaan meja yang dapat ditarik. Motor 4,7/5,7 kW. Diameter spindel 30 mm. Berat sekitar 1000 kg. Dengan alat pendorong WEGOMA VS 34, 3 rol. Meja tenon untuk pemesinan melintang. Gujdpsxwxrqjfx Aabsa

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. Gsdpfxspugwij Aaboua The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: bekas, omga-t55-300-2009 Godpfsxvh E Rex Aaboua

Kondisi: bekas, Cut-off saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Slot Mortising Machine FZS-2 Electronics with infinitely variable slotting spindles and automatic roller table ----- Cut-off saw ----- Spindle arrangement: top Three-phase motor: 3 kW Spindle diameter: 30 mm Speed: 2,800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 slotting spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4,200 rpm Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both slotting spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Mitre table ----- Gujdjwgwlkjpfx Aabsa * Swivel range: +/- 65° * Automatically changing counter support (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter support always in cutting plane for any angle setting Special equipment ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2,500 mm Extraction port diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for cut-off saw ----- Price for the above machine on request! ----- Photos show the same model. Original images not yet available. (Technical data as provided by manufacturer – no guarantee!) All prices net, plus legal VAT.

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Gusdpfsxnlgcsx Aabsa Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, MKN Oven Induksi 2×4 Kutub Produsen: MKN Tipe: 2023109-02 Daya: 400–440 V, 3 fasa Daya: 20,0 kW Dimensi: 1700 × 900 × 900 mm Oven induksi MKN 2×4 kutub adalah perangkat profesional yang dirancang untuk aplikasi di industri kuliner dan manufaktur, di mana performa tinggi, waktu pemanasan cepat, dan kontrol suhu presisi sangat penting. Delapan zona pemanas memungkinkan persiapan beberapa hidangan secara bersamaan, memberikan fleksibilitas tinggi dalam operasional dapur. Guodpjx E Dd Dsfx Aabsa Teknologi induksi MKN menjamin efisiensi energi, keamanan, serta distribusi panas yang merata hanya pada bejana masak, sehingga secara signifikan meningkatkan kenyamanan dan efisiensi kerja operator.

Kondisi: sangat baik (bekas), Four-sided planer Weinig Profimat 23 Fortec Working width: 230 mm Gujdpfsumxqrsx Aabea Working height: 140 mm Number of spindles: 6 Spindle configuration: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certificate

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 2.500 h, THIBAUT TC 625 – 5-Axis CNC Bridge Saw (Used Machine) Description For sale is a THIBAUT TC 625 5-axis CNC bridge saw in very well-maintained condition. The machine is ideally suited for processing natural stone, quartz composite, ceramics, and similar materials, and is especially designed for kitchen countertop and interior fit-out production. Technical Data Manufacturer: THIBAUT SAS (France) Model: TC 625 Machine Type: 5-axis CNC bridge saw Commissioning: approx. 2020 Machine No.: 04.19 Voltage: 400 V / 50 Hz Spindle Power: approx. 13.2 kW Speed: 0 – 6,000 rpm Saw blade diameter: 300 – 650 mm X-Axis: approx. 3,970 mm Y-Axis: approx. 2,300 mm Gedpfxsyuvhfs Aaboua Z-Axis: approx. 500 mm Max. material thickness: approx. 200 mm Condition Machine powered – demonstration available by appointment Spindle hours: approx. 2,500 h Very good technical and visual condition Regularly maintained Immediately ready for operation Equipment 5-axis CNC control Tilting worktable 3,600 × 2,000 mm Table adjustment from 0° to 85° Additional unloading table 3,600 × 400 mm Digital camera for slab imaging Tool and material probe Vacuum lifter up to 500 kg ACS jigsaw system Tool water cooling Software T’CUT basic software Vacuum lifter manipulation module Vein-matching module Contouring and trimming module CAD/CAM software eT’CAM Applications Kitchen countertops Bathrooms and washbasins Staircases Processing of natural stone and quartz composite Ceramics and similar materials Sales Information Price: on request Location: Germany Availability: by arrangement Inspection / trial run: Machine is powered – testing possible

Kondisi: sangat baik (bekas), Steton PF530 E. Electric height adjustment of the planer - Working width: 53 cm - TERS cutterhead - Table length: 275 cm Gjdpfx Aajipx Uqjbjua - Motor power: 4 kW / 380 V - Fence adjustable at an angle - Electric brake The machine is in very good condition and runs smoothly.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Nice machine in good condition, as it comes from a small business and has seen little use. Includes IV 68 tool. Still available for demonstration in operation. Gedpfx Aasu S Afcoboua