Mesin bubut terkendali siklus

VDF Boehringer DNE 820/DL 3000

Kondisi: bekas, Tahun pembuatan: 1998, Rincian teknis: Modul - maks.: 7 Berat mesin sekitar: 5 t Prodpszgw I Njfx Aqvjb Diameter ulir penggiling: 280–350 mm Lebar ulir penggiling: 84–104 mm Jumlah gigi - min.: 6 Jumlah gigi - maks.: 600 Diameter lingkar kepala terbesar yang diizinkan: 360 mm Berat benda kerja maks.: 60 kg Termasuk turboseparator, portal pemuatan, alat penyeimbang dan pengasahan generasi terbaru serta berbagai aksesori.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 2.350 mm, kecepatan pemakanan sumbu X: 13.000 m/menit, laju pemakanan gandar Y: 13.000 m/menit, laju pemakanan sumbu Z: 13.000 m/menit, panjang total: 12.000 mm, tinggi total: 4.800 mm, lebar meja: 2.000 mm, lebar total: 6.800 mm, panjang meja: 2.500 mm, kapasitas pengeboran: 180 mm, kecepatan rotasi (min.): 2.000 rpm, panjang langkah makan poros W: 1.000 mm, en-001 Predpfxsy Hq Dyo Aqvsb

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Predpfjt Hwt Sjx Aqveb Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 - 2,000 mm/min Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Podpfxey Tmhzs Aqvsrb Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader with numerically controlled Z-axis - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Prjdpfeyn Em Rjx Aqvjb Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2009, Diameter putaran di atas landasan 640 mm Diameter putaran maks. di atas pelat geser 435 mm Pengendali SIEMENS - 840 D Rentang kecepatan putar 3 - 2.500 RPM Jarak antar ujung 2.000 mm Diameter lubang spindel 70 mm Diameter spindel pada bantalan depan 100 mm Mesin bubut - dikendalikan oleh siklus | VDF-BOERHRINGER - DUS 630 ti Mesin dalam kondisi baik. Pedpfezaf Hnox Aqvorb Harap perhatikan bahwa detail teknis ditambahkan dari mesin sejenis. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tag: DUS630ti | DUS 630ti | DUS 630 ti

Kondisi: baik (bekas), The listed driven tools VDI 50 are designed for a tool turret by SAUTER and are in good condition and fully functional. These tools have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufactured by NACKE + WTO, VDI 50 for SAUTER brand tool turret: Item No.: XVI 24275 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 Predpfxebql S Hs Aqvjb 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Meja pengukur Mitutoyo dalam kondisi sangat baik, terletak di ruangan ber-AC dengan suhu 20°C. Dikalibrasi secara berkala oleh Mitutoyo. Predpfx Aezd R D Esqvob Ketersediaan: 10/2026 Kepala ukur bermotor SP25M dengan probe PH10MQ Pengukuran sentuh dan pemindaian Presisi pemindaian: dalam 2,3 µm Presisi pengukuran: dalam 1,7 µm +0,4 µm per 100 mm Bobot benda kerja maks.: 1.200 kg Dimensi meja granit: PxL Tinggi maksimal di bawah jembatan: 800 mm Perangkat lunak: Mcosmos 3 dan MiCAT

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 2.800 rpm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 30.000 W, tinggi total: 1.915 mm, lebar total: 2.035 mm, berat keseluruhan: 5.650 kg, panjang produk (maks.): 3.821 mm, jumlah sumbu: 3, Mesin bubut 3-sumbu DOOSAN Puma GT 3100 M ini diproduksi pada tahun 2022. Mesin ini memiliki diameter bubut maksimum 376 mm dan panjang bubut 725 mm. Mesin ini dilengkapi dengan revolver perkakas 12 posisi dan chuck tiga rahang dengan diameter 305 mm. Jika Anda mencari kapasitas bubut berkualitas tinggi, pertimbangkan mesin bubut horizontal DOOSAN Puma GT 3100 M yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Layar sentuh kontrol Siemens S828D dengan tampilan ShopTurn (15 inci) • Mesin bubut horizontal CNC 3-sumbu dengan perkakas yang digerakkan dan luncur belakang • Sumbu C spindel utama: 360°, resolusi 0,001° • Kecepatan putar sumbu C: 200 RPM • Torsi sumbu C: sekitar 1162 Nm • Diameter ayun di atas alas: 720 mm • Diameter ayun di atas peluncur silang: 590 mm • Diameter bubut maksimum: 376 mm • Panjang bubut maksimum: 725 mm • Lubang spindel utama: 115 mm • Diameter batang: 103 mm • Nose spindel: ASA A2-11 • Torsi maksimum: sekitar 1112 Nm • Kecepatan cepat sumbu X: 24 m/menit • Kecepatan cepat sumbu Z: 30 m/menit • Gaya umpan sumbu X: 9.465 N • Gaya umpan sumbu Z: 17.379 N Predpfx Aoy E I Hisqveb • Diameter chuck tiga rahang: 305 mm dengan rahang lunak • Revolver perkakas 12 posisi dengan dudukan perkakas BMT65P • Kecepatan putar maksimum perkakas yang digerakkan: 5.000 RPM • Daya perkakas yang digerakkan: sekitar 7,7 kW • Torsi perkakas yang digerakkan: sekitar 75 Nm • Luncur belakang dengan diameter selongsong: 100 mm • Langkah selongsong: 100 mm • Sistem penjepit hidraulik dengan silinder berongga • Alas mesin monoblok dari besi cor, konstruksi Meehanite • Konstruksi alas miring 30° • Panduan yang dikeraskan dan digiling dengan lapisan gesekan rendah • Pelumasan pusat otomatis • Sistem pendingin: tekanan 7 bar • Volume tangki pendingin: sekitar 235 liter • Tangki hidraulik: sekitar 20 liter • Pelindung penuh dengan pencahayaan area kerja • Antarmuka untuk umpan batang • Pemisah oli • Kopling pengaman elektronik untuk sumbu X dan Z • Sambungan listrik: 400 V, 3 fase, 50 Hz • Total daya: sekitar 47 kVA • Belum digunakan (kondisi baru) • OPSIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper untuk Doosan Universal Big 70 • Stasiun putar • Penyangga benda kerja • Pelat dasar 23 mm / 175 mm Big 70 • Kotak antarmuka mesin • () Spesifikasi Teknis Spindel Belakang Tidak Perkakas yang Digerakkan Ya

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 650 mm, diameter pembubutan: 400 mm, Fanuc Oi-TD control 3-jaw chuck, diameter 250 mm 12-position turret Tailstock Chip conveyor The machine has only 4051 power-on hours Technical details: Swing diameter: 650 mm Turning diameter: 400 mm Turning length: 650 mm X-axis travel: 230 mm Z-axis travel: 650 mm Max. spindle speed: 4500 rpm Podpfx Ajvi Haqeqvjrb Number of tool stations: 12 Spindle drive capacity: 11/15 kW Weight approx.: 5400 kg Technical data, accessories and machine description are non-binding.