Pusat mesin bubut

VDF BOEHRINGER DUE560x1500

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table Hsdpfx Ahorz Nflswsi - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S4E184001, diameter putar di atas sled silang: 430 mm, panjang pembubutan: 670 mm, diameter pembubutan: 220 mm, lubang spindel: 45 mm, kecepatan spindel (maks.): 6.300 rpm, berat keseluruhan: 4.300 kg, Mesin bubut CNC hard turning bekas dengan spindle tambahan Merek: EMCO Tipe: Emcoturn 45E Tahun pembuatan: 2018 Jam operasi rendah Kontrol: Siemens 828D Jumlah alat: 12 unit berpengerak Kecepatan maks.: 0-6000 rpm Hsdpfxew Rrvwj Ahwsi

Kondisi: bekas, en-001 Hsdpfovadd Isx Ahwei

Kondisi: bekas, CNC flame cutting system BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Track gauge: 3345 mm Track height: 650 mm 2x machine cutting torches Hodpof Ncadsfx Ahwei with burn table

Tahun pembuatan: 1977, Kondisi: bekas, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, three-jaw chuck, and Multifix quick-change tool post. Front guideway shows signs of wear. The machine is in operational condition and can be demonstrated under power by prior arrangement. Hsdpfx Ahomdn Dxswei

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 330 mm, lubang spindel: 78 mm, diameter pembubutan di atas alas geser: 520 mm, tinggi pusat: 260 mm, panjang pembubutan: 1.500 mm, gores kuas bulu: 127 mm, diameter quill: 68 mm, panjang total: 2.670 mm, lebar total: 810 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 20 rpm, lebar tempat tidur: 300 mm, berat keseluruhan: 2.135 kg, penjepit rumah spindel: MK 4, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose in accordance with DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: Hsdpfx Ahjctutmswoi - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on mating surfaces) for the tool and cross slides - Manual central lubrication with one pump for longitudinal and cross slides - Complete coolant system with rear splash guard and carriage splash guard - Chuck guard - Control rod with three adjustable cams - Machine lamp - Fixed centre - Set of machine leveling pads

Kondisi: bekas, Tahun pembuatan: 1974, diameter pembubutan di atas alas geser: 480 mm, lebar di tengah: 1.500 mm, Lead and Feed Screw Lathe Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Completely overhauled in 2012 Technical Data Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Year of manufacture: 1974, completely overhauled in 2012 Control: conventional Centre distance: 1,500 mm Swing over bed: 480 mm Swing over cross slide: 295 mm Spindle speed: 20 – 2,190 rpm Dimensions (L x W x H): 3.50 x 1.20 x 1.55 m Machine weight: 1,200 kg Equipment - 3-jaw chuck D 250, mounted - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information subject to change. Hedpfowm D Ilsx Ahwsi A demonstration under power is possible at any time in our showroom.

Kondisi: baik (bekas), Tahun pembuatan: 1956, Heavy-duty lathe, engine lathe, turning lathe, geared head lathe -Manufacturer: Weisser, geared head lathe type PF200 -Turning length: 1340 mm -Swing over bed: 420 mm -Swing over cross-slide: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 – 1400 rpm -3-jaw chuck: Röhm Ø 250 mm Hedpetzf N Rofx Ahwoi -Accessories: included, see photos -Tailstock taper: MT4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar di tengah: 390 mm, tinggi pusat: 310 mm, berat keseluruhan: 61 kg, tegangan masuk: 230 V, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 3.500 rpm, penjepit spindle: MK 2, daya: 0,75 kW (1,02 hp), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast hand rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Hand rest edge made of hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejecting pin and key for tightening the faceplate. • Pre-drilled holes for headstock lighting. • Easy accessory mounting: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! Hjdpotuuv Njfx Ahwji The medium-sized LAGUNA 1216 lathe is distinguished especially by its robust components: cast iron construction of headstock and tailstock, precision-ground lathe bed, and tool rest with a durable, hardened steel edge. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50-525, 325-1750, 650-3500 rpm. Infinitely variable speed adjustment via Duralumin regulator and 3-step belt change using a simple lever mechanism. The motor technology provides high torque even at low speeds. Tailstock lock at the rear: stays out of the way during work, yet easily accessible. Ergonomic handles with eccentric clamping for very secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50-525, 325-1750, 650-3500 rpm • Max. turning diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock quill bore: 17 / 17 mm • Tailstock quill travel: 63 mm • Tool rest shaft size: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions incl. packaging: 750 × 226 × 442 mm • Weight incl. packaging: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Driving center • Live center • Faceplate • Tool rest • Ejecting pin with brass tip • Spindle locking key

Kondisi: baik (bekas), Tahun pembuatan: 2000, CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Hedpofrbckjfx Ahwoi Electromagnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray. Complete machine documentation available.