PENGHANCUR LIMBAH

VECOPLAN V(V/N)Z300

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Bodpfxew Sy T Hs Ahwscw Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Bcedpfx Ahovgrh Uowew Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Kondisi: bekas, Holzhacken von Rundholz: 100-150 m³/h Hacken von kleinen Resthölzern: 50-100 m³/h Gewicht: 3.165 kg Max. Stammdurchmesser: 254 mm Bedpfxjhclffs Ahwjcw Söderhamn Eriksson 670-56 CC Hacker mit Elektromotor. Der Söderhamn Eriksson 670-56 Hacker ist zur Herstellung von Hackschnitzeln für die Zellstoff-, Faserplatten- und Spanplattenproduktion vorgesehen. Sowohl Rundholz als auch Sägewerksabfälle können als Rohmaterial verwendet werden. Der Einzug des Hackers 670-56 erfolgt horizontal, in einem Winkel von 37,5 Grad zur Holzfaser. Die hochwertigen, gleichmäßigen Hackschnitzel können wahlweise nach unten abgeführt oder direkt nach oben ausgeblasen werden. Werden auch Sie zu einem der Holzverarbeitungsbetriebe, die ihre verfügbaren Ressourcen effizient nutzen.

Tahun pembuatan: 2003, Kondisi: diremaj di bengkel (bekas), Stock No. 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput: up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and knife head, 4.4 kW drive Bcedpfxoiyyf Io Ahwew By-pass system TVE 1000 ED pellet dryer, 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200-liter water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Additional UWG pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available ex stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruder.

Kondisi: baru, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm and made from various materials such as PE, PP, and PVC. These machines are capable of shredding plastic pipes up to 9 meters in length directly, without the need for pre-cutting or sawing. The centerpiece is a rotor with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and shreds material gently at low rotational speed. The pipe is loaded into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator processes the material into regrind directly suitable for further processing. Bsdpfx Aoghgd Ishwocw The entire system is operated automatically via a central control unit. Additional benefits of the system include low energy consumption, avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Kondisi: baru, Tahun pembuatan: 2024, Hacker knives 40 x 40 concave Knives for Weima, Gross ... Bcjdpfx Ahobxu Dhowow Suitable for almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Gewicht 4.950 kg, Gesamtgewicht 12.000 kg Bjdpowpmckofx Ahwocw 5,5 kW

Kondisi: baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 13639, Steuerung: Heidenhain Verfahrwege: X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 min⁻¹ Antriebsleistung Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorne am Lager: 70 mm Aufgerüsteter Werkzeugwechsler, Kapazität: 100 Plätze Schwenkrundtisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbereich C-Achse: 360° Maximale Tischbelastung: ca. 1.000 kg Maximaler Werkzeugdurchmesser: 80 mm Maximaler Werkzeugdurchmesser bei freiem Nebenfach: 125 mm Maximale Werkzeuglänge: 300 mm Maximales Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X/Y/Z): 30 m/min Elektrischer Gesamtanschlusswert: 31 kVA Bjdpjinh Rqefx Ahwecw Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Weitere Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), NEUE HERBOLD granulator Universal mill – heavy duty design - Year of manufacture: 1998 - Constructed from stainless steel Bcsdeh Rwc Ejpfx Ahwsw - From a technical center (machine was exclusively used for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 knife rows

Kondisi: baru, Tahun pembuatan: 2026, Consisting of a bale breaker for large bales, type MHB, and straw shredder type MHZ 1) Bale Breaker MHB: Bedpfx Ahjb Nulhswjcw Special price from €22,975 net (Approx. 15 weeks production time) Suitable for round or square bales. Including frequency inverter (controls the speed of the scraper floor). The bales are placed on the scraper floor and the cutter head feed is switched on. The cutter head tines tear the straw from the bale and throw it into the hopper. Ideally, this machine is combined with a straw shredder. Technical data for bale breaker: Capacity: 1–2 bales per hour Up to a maximum of 600 kg per hour (depending on the installed sieve size in the straw mill, kW rating of the straw mill). Without a straw mill, the bale breaker can process up to 900 kg/hr of straw. Maximum square bale size: 2400 x 1200 x 800 mm (LxWxH) Cutter head motor: 5.5 kW, 380 V Scraper floor feed: 0.75 kW, 380 V Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the larger straw shredder (18.5 kW): +€3,940 net Technical data, MHZ with special feed hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Selectable perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options at extra cost: Feed auger: +€970 net Cyclone (suspension by customer) *should be no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional rotary valve (renders material pressureless) +€5,750 net Control system: from €1,620 net Special bale breaker extension 3m (other dimensions upon request) +€9,750 net Briquetting press MPP 180 S; little-used demonstration unit 70 mm briquette – up to max. 100 kg/hr from €39,700 net * Larger machines available on request --- Description: muetek bale breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ/MHB series are characterized by their robust design and heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor onto which the bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor pushes the bale against the cutter rotor; the feed speed is adjustable. The cutter rotor is fitted with multiple teeth which rip open the straw bale. The separated straw is then discharged. --- The machines are generally designed for dry materials: - Straw - Hay --- Processing hemp bales is only possible with a special bale breaker Surcharge approx. €9,720 net (depending on configuration) Straw mills are not suitable for processing hemp. Material requirements: Maximum moisture content: 12%