Trailer penurun kargo
Vezeko HUSKY FB K B 27.35 SP | SILBER | SEITENTÜR 344X157X200CM 2700KG ABSENKKOFFERANHÄNGER

Name: Vezeko HUSKY FB K B 27.35 SP | SILBER | SEITENTÜR 344X157X200CM 2700KG ABSENKKOFFERANHÄNGER
Brand: Vezeko
Price: 10664 EUR
Availability: InStock

harga tetap ditambah PPN

€10.664

Kondisi

Baru

Lokasi

Isselburg

Trailer penurun kargo Vezeko HUSKY FB K B 27.35 SP | SILBER | SEITENTÜR 344X157X200CM 2700KG ABSENKKOFFERANHÄNGER

Vezeko HUSKY FB K B 27.35 SP | SILBER | SEITENTÜR 344X157X200CM 2700KG ABSENKKOFFERANHÄNGER

Data mesin

Nama mesin:: Trailer penurun kargo

Pabrikan:: Vezeko

Model:: HUSKY FB K B 27.35 SP | SILBER | SEITENTÜR 344X157X200CM 2700KG ABSENKKOFFERANHÄNGER

Kondisi:: baru

Harga & Lokasi

harga tetap ditambah PPN

€10.664

Lokasi penjual:: Dekkers Waide 17, 46419 Isselburg, Jerman

Hubungi

Rincian penawaran

ID iklan:: A21218337

Nomor referensi:: FKS227351520.04

Pembaruan:: terakhir pada 11.02.2026

Deskripsi

* IMMEDIATELY AVAILABLE *
Including side door / lowering platform / manual hydraulics / braked

TECHNICAL DATA
• Brand: Vezeko
• Model: Husky FB K
• Vehicle type: Drop-bed trailer
• Vehicle condition: New vehicle
• First registration: without first registration
• Technical inspection (TÜV): 2 years from initial registration
• Internal dimensions (LxWxH): 344 x 157 x 200 cm
• External dimensions (LxWxH): 493 x 228 x 255 cm
• Load height (from ground): 44 cm
• Permissible total weight: 2,700 kg
• Unladen weight: 871 kg
• Payload: 1,829 kg
• Chassis: Low-loader (wheels beside body)
• Tyres: 195/50R13C
• Suspension: AL-KO rubber torsion axle
• Jockey wheel: Yes
• 100 km/h approval: Optional, retrofittable

DESCRIPTION

• 15 mm multiplex birch floor, anti-slip coated – extremely robust
• Very sturdy welded steel frame
• Frame fully hot-dip galvanized by immersion
• Multiple crossmembers for high point load capacity
• Superstructure made of extremely solid welded steel panel sandwich, insulated, 30 mm thick
• Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet
• Roof made of 25 mm GRP sandwich
• Two-winged rear door with lockable stainless steel bar lock
• Doors with special sealing profiles of hard/soft plastic
• Side door, standard right front, approx. 70 cm, with triple-bolt security lock, lockable from inside and outside
• Rear frame made from hot-dip galvanized steel, solidly welded
• Loading platform hydraulically lowerable
• Mechanical safety lock for pivot axis during travel
Podpoyivbbofx Anwjpt
• Rear foldable stainless drive-on ramp
• Additional longitudinal reinforcements fully welded
• Front storage box
• 10 lashing eyes within V-loading rail, rubber-coated, pull force (750 DaN/kg)
• Rear number plate holder
• AL-KO overrun device and parking brake
• AL-KO coupling head
• Extra robust V-drawbar reinforced
• Reversing automatic system
• 13-pin plug
• Reversing light
• High-capacity safety lighting
• Integrated rear fog light
• Rear lane marker lights in LED
• Rear frame lights recessed
• Centrally mounted jockey wheel with clamp

Optional accessories available – feel free to inquire:
• Electric pump instead of manual pump
• 100 km/h approval with shock absorbers
• Lashing rails on the wall
• Anti-theft device
• Spare wheel
• Additional lashing eyes
• Reversing light
• Lashing straps
• And much more

New vehicle with warranty and technical inspection (TÜV).
—————
- Financing or leasing available
- Nationwide delivery possible
- All prices include VAT
- Vehicle registration documents can be sent in advance, or temporary registration plates (Germany) can be provided
- Export registration with customs clearance possible

Descriptions and images are protected by copyright!!

Trailer Center BAUMANN GmbH
Dekkers Waide 17
46419 Isselburg

Over 1,200 trailers available from stock!

For over 30 years: Official dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands

- Errors, omissions, and prior sale excepted -

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2017

402 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 2874 ... iklan

Simpan

Bagikan Laporkan iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Bandsaw - Horizontal BERG & SCHMID GBS 305 HA-I Easy

Jerman

11.023 km

Bandsaw - Horizontal
BERG & SCHMIDGBS 305 HA-I Easy

Hubungi

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Pedpod Iipxsfx Anwspt SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Lihat detail

Iklan kecil

Pabrik penyaringan Kleemann MMS802i EVO2

Hessisch Oldendorf

11.083 km

Pabrik penyaringan
KleemannMMS802i EVO2

Hubungi

Iklan kecil

Platform kerja listrik Genie Runabout GR-20 Genie GR-20

Dortmund

11.209 km

Platform kerja listrik Genie Runabout GR-20
GenieGR-20

Hubungi

Iklan kecil

Unit roda gigi heliks Unit roda gigi industri ASUG Penig Flender TGL 21815 10LA1 280/400x80

Radeberg

10.785 km

Unit roda gigi heliks Unit roda gigi industri
ASUG Penig FlenderTGL 21815 10LA1 280/400x80

Hubungi

Tahun pembuatan: 2016, Kondisi: baru, 1 piece of overhauled, unused industrial bevel helical gear unit from ASUG. TGL 21815 All gearbox components have been replaced except for the housing! Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Psdpfx Anogwlrdswept Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 rpm Output speed: n2 = 17.5 rpm Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1170 mm !! Gear unit is not equipped with oil cooler !!

Lihat detail

Iklan kecil

Tychy

10.435 km

Mesin penyeimbang
SCHENCKHM60U

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 1.800 h, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 20.000 kg, lebar total: 3.000 mm, panjang total: 9.000 mm, tinggi total: 3.000 mm, jenis arus masuk: Arus searah (DC), SCHENCK, HM60U, diameter maksimum 3.000 mm, berat rotor maksimum 20.000 kg, unit pengukuran baru CAB920 SmartTouch (2025), SCHENCK, penutup pelindung termasuk, tanda CE, sertifikat kalibrasi Februari 2026, penggerak 75 kW dengan gearbox kecepatan tinggi, 3 shift, sepasang bantalan rol untuk diameter journal 50 - 200 mm, sepasang bantalan rol untuk diameter journal 200 - 400 mm, sistem pelumasan untuk carriage rol Ppjdpfxjylin Hj Anwst

Lihat detail

Iklan kecil

Jerman

11.023 km

Oven kereta kawanan
NaberthermW 1000/A

Hubungi

Iklan kecil

Tangki tekanan 11 bar 1500 l Otto Boge S 28406

Helmstedt

10.966 km

Tangki tekanan 11 bar 1500 l
Otto BogeS 28406

€1.000

harga tetap ditambah PPN

Hubungi

Iklan kecil

Langit-langit crane, crane hall crane, rel kereta 13.500 mm ABUS Hallenkran Brückenkran Kran ELV 5t NL 5000Kg Portalkran Kran 13500mm 131Std

Gondelsheim

11.191 km

Langit-langit crane, crane hall crane, rel kereta 13.500 mm
ABUS Hallenkran Brückenkran Kran ELV 5tNL 5000Kg Portalkran Kran 13500mm 131Std

€15.500

harga tetap ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, nomor mesin/kendaraan: TH241-14/433886, jam operasional: 131 h, ABUS ELV crane, rel kereta atas rel, crane jembatan, crane untuk gudang Kapasitas angkat: 5t - 5000KG Lebar rel: 13.500 mm, dimensi luar sekitar 13.700 mm Tahun produksi 1999 dengan kontrol lantai Pjdpfex Ev Tkox Anwjpt Tinggi angkat 6m Tinggi konstruksi dari puncak crane ke kait sekitar 1.020 mm (balok 540 mm + trolly 480 mm) Panjang girder kepala dengan buffer sekitar 270 cm SWP: jam penuh terpakai 131, sisa masa pakai teoritis 1.469 jam Crane sudah dibongkar dan siap langsung digunakan Kondisi sangat baik, buku pemeriksaan tersedia Tersedia juga crane putar kolom dan crane putar dinding serta sistem Demag KBK dan Abus HB, juga Errikla, Hadef, Stahl KT 2000, dll. Pengiriman melalui ekspedisi dimungkinkan, silakan minta penawaran sesuai kode pos Pengambilan sendiri diutamakan

Lihat detail

Iklan kecil

Sosnowiec

10.422 km

Mesin bubut CNC
STYLE510

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 20 h, diameter putar di atas sled silang: 300 mm, panjang pembubutan: 1.350 mm, diameter pembubutan: 510 mm, lubang spindel: 50 mm, kecepatan spindel (maks.): 2.500 rpm, daya motor spindle: 7.500 W, pergeseran cepat sumbu Y: 8 m/menit, pergerakan cepat sumbu Z: 8 m/menit, kecepatan rotasi (min.): 2.500 rpm, jarak gerak quill: 160 mm, diameter quill: 75 mm, gores kuas bulu: 160 mm, diameter ayun di atas peluncur silang: 300 mm, kecepatan pemakanan sumbu X: 2 m/menit, laju pemakanan gandar Y: 2 m/menit, berat benda kerja (maks.): 600 kg, diameter pembubutan di atas carriage atas: 300 mm, berat keseluruhan: 2.700 kg, diameter pemasangan: 40 mm, Perlengkapan: dokumentasi / manual, Style CNC is a company specializing in the manufacture of CNC lathes and milling machines designed for single-piece or small batch production. If you operate a tool shop, prototyping facility, or provide services requiring an exceptionally fast turnaround, Style offers an ideal solution. The intuitive graphical software enables you to create programs directly on the machine’s touchscreen within just a few minutes. Currently, we offer for sale a demo machine with a limited number of dry-run hours. The machine is sold with a full 12-month warranty and includes commissioning and operator training. Psdpfjw Eum Aex Anwopt In Poland, Style CNC has its own dedicated service branch.

Lihat detail

Iklan kecil

Mesin bubut tengah Weiler Condor 81 Geometrisch Überholt

Ubstadt-Weiher

11.191 km

Mesin bubut tengah
WeilerCondor 81 Geometrisch Überholt

Hubungi

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads Ppedpfxjwrm Dts Anwst About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Lihat detail

Beriklan di sini