Mesin poles rol

VIGANO' SP 1200

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 437.0COLIBRI, daya: 8 kW (10,88 hp), sambungan udara terkompresi: 6 batang, frekuensi input: 50 Hz, tegangan masuk: 380 V, tekanan kerja: 6 batang, lebar benda kerja (maks.): 630 mm, Wide belt sander dalam kondisi baik untuk dijual. 2 rol untuk pra dan finishing sanding. 2 kecepatan pengumpan. Penyesuaian ketinggian secara elektrik dengan tampilan digital. Lebar pengamplasan 630 mm. 2 koneksi untuk hisap debu. Bantuan saat pemuatan tersedia. Knodpsuh Sccjfx Aahof

Kondisi: bekas, Tahun pembuatan: 1998, Kapasitas muat 620 liter Diameter luar tangki 1695 mm Panjang tangki (terentang) 3800 mm Lebar bak kerja 430 mm Putaran 900 - 1485 rpm Tegangan operasi 400 V Total daya terpasang 7,5 kW Berat mesin sekitar 1600 kg Kebutuhan ruang sekitar 1,80 x 1,70 x 1,30 m - Nomor pabrik: 18585/98-03 - dengan kecepatan yang dapat diatur secara kontinu Kodpfxow Hnr Is Aahenf (inverter frekuensi) - dengan katup pemisah pneumatik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.350 mm, Costa calibration machine Knsdewmxh Tepfx Aahof

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. Knodspugwiopfx Aahef The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar yang dibutuhkan: 3.200 mm, persyaratan ruang panjang: 1.200 mm, kebutuhan tinggi: 2.100 mm, berat keseluruhan: 170 kg, lebar total: 3.200 mm, panjang total: 1.700 mm, lebar dalam: 1.500 mm, HEAVY DUTY Drying Trolley / Cantilever Cart - For the Toughest Demands Key Facts at a Glance: 1. Ball-bearing sliding track for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. Generous intermediate spacing of 135 mm allows for easy loading, even at fast working speeds 4. Upright, square-profile main beam for minimal contact surface 5. Large usable depth of 1,000 mm Kjdpfxofiuhvo Aahenf 6. High load capacity of 1,000 kg 7. Premium-quality rollers provide effortless mobility, even when fully loaded Simply outstanding quality, "Made in Denmark". The carts are usually available for immediate delivery from stock. To save shipping costs for our customers, we ship the trolleys pre-assembled (see photo). Setup is completed very quickly. Do you have questions? Contact us – we’re happy to help!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, I am selling a 2-head UV curing tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Year of manufacture: 2015. Knsdpfsffk Etjx Aahsf Available immediately. Requires repair: display, power supplies for both UV units.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, We offer you: Deburring machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical data and features: - Abrasive belt change on the left machine side - Tool set - Digital thickness indicator - Material feed at the infeed too strong - Electropneumatic control of the oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on or off - Machine with head adjustment (fixed working height 900 mm) - Lift system on 4 columns (spindle drive) with chain drive - Table extension at front and rear with one roller each - Industry 4.0 (LAN) package with LAN network connection - Working width: 1,350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height: 160 mm - Internal LED lighting - Electronic belt control for the longitudinal units - Calibration-grinding unit with sanding roller diameter 190 mm, belt length 2,620 mm - Electromechanical grit setting - The speed of the abrasive belt can be set via frequency converter - V-Spin unit with 15-disc grinding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row, counter-rotating. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removal of slag or oxides. Knodpfx Aaov Hxrgjhsf - 16 support discs for V-Spin units, 80 mm diameter Scotchbrite + abrasive grain size 80 - 16 support discs for V-Spin unit, 80 mm diameter Tampico + abrasive grain size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads; each head is fitted with 3 pads for rotating sanding brushes, diameter 123 mm - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5–7 m/min Conveyor belt made of HYPALON rubber, heat and oil resistant, hardness 60 Shore, with smooth surface - Belt cleaning blower for the conveyor carpet incl. extraction - IPC MONITOR 15" touch screen control for machine operation, up to max. 10 processing units The control system manages the following processes: - Start sequence of selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness controller - Acoustic and visual signals when the machine starts up - Operating hours counter - Automatic control of feed speed according to machining performance (expressed in sqm). This allows for longer abrasive belt life based on the statistics. The machine is in very good condition and comes with 2 Euro pallets of new abrasive belts. Accessories, depicted tools and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and details as well as prior sale are subject to change and error!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 2.500 mm, Perlengkapan: dokumentasi / manual, Zayer moving column milling machine, horizontal travel 10,000 mm, vertical travel 2,500 mm, ram travel 1,250 mm, spindle 1,800 rpm, 30-position tool magazine, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, spindle taper regrinding scheduled for October 2024 (ISO50), regularly serviced. Currently in operation. Kjdjwhd Alspfx Aahjnf

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2012, nomor mesin/kendaraan: 925625, Kuka Unused stock KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Weight: 1,412 kg Serial number: 925625 Includes connecting cables: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2, used, fully functional / Serial number: 0000562 Robot Data: Repeatability: ± 0.06 mm Axis 1: ± 185° Axis 2: -140° / -5° Knsdpfxsrdh T De Aahef Axis 3: -120° / 155° Axis 4: ± 350° Axis 5: ± 122.5° Axis 6: ± 350° Robot motion speed in °/s Axis 1: 105°/s Axis 2: 107°/s Axis 3: 114°/s Axis 4: 136°/s Axis 5: 129°/s Axis 6: 206°/s

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Configuration: soft drum with electronic segmented pad. Kedpfxjgq U R Ns Aahsnf Working width: 1150 mm Abrasive belt dimensions: 1180 x 2620 mm Infeed rollers for processing short workpieces. Vacuum fan included. Air blowers on both sanding units. Total weight: 2,500 kg 2 motors: 7.5 kW and 15 kW Total power: 27 kW Condition: very good, regularly serviced machine. Available immediately.