Ruang uji korosi

VLM SAL 400 V.713.062.000

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, 2 units GMP-compliant vacuum drying ovens, Vötsch Industrietechnik (also available separately). Product-contacting material: Stainless steel 1.4435. Heating type: externally heated hollow inserts, top cover also heated, double-walled with internal meander baffles, pressure-tight up to 3 bar. Heating via a separate heating/cooling circuit (indirect heating with hot water) using a separate hot water thermostat. Operating temperature: max. 95°C, operating pressure inner chamber: 0 to 1 bar abs. Nsdpfx Abeucdqnj Eodd External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Tray dimensions: 1200 mm width x 950 mm depth Number of trays: 13 pcs Usable area: 14.8 m² Weight: approx. 2900 kg per dryer Connections: hot water supply (flow and return), vacuum connection Heating of the vacuum drying ovens with a heat transfer medium (e.g. water), connections at the rear. Heating medium temperature controlled by temperature control unit type 95-36-E, rated voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating power can be reduced to 18 kW in a defined temperature range.

Kondisi: baru, Tahun pembuatan: 2025, Spray-Flood Cleaning System - Parts Cleaning System Washing (600 liters) + Rinsing (430 liters); electrically heated; The cleaning process can be carried out by spraying, flooding (injection flood cleaning), and with ultrasonic action. The basket can remain stationary, tilt, or rotate during the cleaning process (selectable via program). Drying via hot air and vacuum drying. Usable basket dimensions: LxWxH 600x400x300 mm Max. loading weight: 150 kg Loading table in front of the machine included. Control system: Siemens S7-1200 with 20 programs. Njdpfehu Sg Isx Ab Eodd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, IMMEDIATELY OPERATIONAL! This degreasing unit operates under vacuum using modified alcohol. Degreasing of metal components contaminated with oil and chips from machining processes. Usable solvents: modified alcohols Hydrocarbons class AIII (flash point > 55° C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Oil preservation/corrosion protection (spraying) Candle filter Very good condition (system has been used very little) 6 months warranty Serviced by Metalclean AG System process: Spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Specifications: Basket size: 480 x 320 x 200 h mm Ndsdjhg Ugiepfx Ab Esd Maximum load weight: 50 kg Average batches per hour: up to 5 Machine dimensions: 1600 x 1600 x 2400 mm (H) Machine weight: 2300 kg Electrical connection load: 16 kW Energy consumption: 10 kWh Solvent volume: approx. 250 liters

Kondisi: baru, Tahun pembuatan: 2018, For sale is an unused Rösler FKS 35 Tandem equipped with a soundproof cabin, manufactured in 2018. The system is still in its original packaging and available in our warehouse. You are welcome to schedule an on-site inspection by prior telephone arrangement. Nodpol D Ex Dofx Ab Esdd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Material Testing Machine: ZwickRoell GmbH mod. Z005TN Designed for performing standard tests on materials and components, this equipment enables precise measurement of strength, elasticity, and other material properties—crucial in engineering and material research. Featuring advanced technology and intuitive software, the machines offer efficient and safe operation. The set includes accessories for tensile, compression, and flexural testing. Technical Specifications: • Year of manufacture: 2010 • Maximum Load (Fmax): 5 kN • Testing Dimensions: - Height (without accessories): 1070 mm - Test Travel Height: 1000 mm • Frame Dimensions: - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm • Weight: approx. 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption approx. 800 VA. The machine is suitable for testing a variety of materials and components, including: • Construction materials: concrete, steel, timber. • Plastics: elasticity, tensile strength. • Metals: strength, hardness, and fatigue tests. • Mechanical components: compression, bending, and tensile tests. • Samples of various forms: thin layers, blocks, tubular specimens. The system's flexibility allows testing to be adapted to specific requirements. TAG: Laboratory equipment, Material testing, EPS foam, Polystyrene production, Mechanical testing, Thermal conductivity, Material properties, Construction materials, Quality control, Engineering research Nsdouna Iuopfx Ab Esdd

Tahun pembuatan: 2005, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 1.600 kg, berat muatan maksimum: 1.000 kg, tinggi dalam: 1.200 mm, panjang dalam: 1.390 mm, lebar dalam: 1.390 mm, daya nominal: 64.000 kW (87.015,68 hp), kapasitas pompa: 500 l/menit, tekanan pompa: 450.000 batang, kapasitas tangki air: 800 l, nomor mesin/kendaraan: 25191, Industrial machine and parts cleaning device. Equipped with three washing chambers: one main chamber and two auxiliary chambers. Technical condition: excellent – used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 Ndodjrkz Stspfx Ab Eed Main machine components: - Washing chamber door (with actuators) - Upper washing nozzle - Lower washing nozzle - Pressure pipelines - Control cabinet - Main washing pump - Auxiliary pump 1 - Auxiliary pump 2 - Water heater (for each chamber) - Drain valve - Water level sensor - Parts washing basket - Oil separator - Steam vent - Water pressure gauges - Automatic water filling and chemical dosing system Additionally, the set includes a reverse osmosis water filter.

Kondisi: bekas, Length 1250 mm Nsdpsk Tu Nnjfx Ab Esdd Width 1250 mm Table diameter 1595 mm Table load capacity 10 t Table height 290 mm Machine weight approx. 2.0 t Required space approx. 1.8 x 1.3 x 0.3 m - The rotary table comes from a showroom and is in like-new condition!!

Kondisi: bekas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] Nedsuhcbcjpfx Ab Ejdd - Maximum weight: 350 [kg] - Travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] - Tank capacity: 260 [l] - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control - Cooling unit - Lubrication tank with pump - Automatic threading

Tahun pembuatan: 2006, Kondisi: bekas, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning Plant, Wire Treatment Plant Ndsdpfxjf Nku Ro Ab Eed Manufacturer: Sirio-Wire Model: M0209 Number of wires / conductors: 12 (6+6) Wire diameter: 1.0 - 5.5 mm; however, thicker wires have also been processed on the line with very satisfactory cleaning results. Year of construction: 2006 The system was in operation for only about three years before production was relocated to another site. Process: Ultrasonic and electrolytic cleaning in hot bath You can find a detailed description of the process on the manufacturer’s website siriowire under "Ultrasonic and Electrolytic Cleaning". The plant is in good, operational condition and is complete except for the pumps. In the photos, the operator platform and the drip tray in which the system stands are missing; these photos will be added soon. The last three photos show similar plants of this model in operation.

Kondisi: baru, Table height: 800 mm Njdjfk Ailjpfx Ab Eedd Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Approx. weight: 630 kg Special worktable systems of the SST, SFT, and SWT fix series as 3D clamping workstations for efficient production of assembly, welding, and adhesive constructions, e.g., fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalog section Weld Table Accessories), these table systems can also be configured as flexible fixtures, allowing for high-quality production of small and medium batch sizes. The special worktables feature a 16 mm (dual Standard) or 25 mm (triple 24+1) thick worktop, which is equipped with a Ø28 mm hole grid pattern. In addition, the tabletop has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows the use of a variety of clamping elements and positioning aids. For special use cases, the table surface can optionally be equipped (deviating from standard) in stainless steel 1.4301, aluminum, plastic, or also in high-strength materials such as ST70. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. This ensures the table system remains particularly sustainable in use. Price to be reconfirmed with the manufacturer before ordering!!