Memuat platform

Volvo FM420 4x2 / PALFINGER 18502 - 17 mtr / CRANE / ...

Kondisi: bekas, jarak tempuh: 344.242 km, daya: 309 kW (420,12 hp), jenis bahan bakar: diesel, warna: putih, konfigurasi gandar: 4x2, ukuran ban: 385/65R22.5, bahan bakar: diesel, jarak roda: 5.600 mm, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, lebar ruang muat: 2.470 mm, panjang ruang muatan: 6.480 mm, tinggi ruang muatan: 800 mm, Tahun pembuatan: 2018,

Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: 110-044731, Penawaran 25160 Ksdpfx Adew S D Emowjnd Data Teknis: - Kapasitas angkat: 3.200 kg - Lebar rel kira-kira: 9.090 mm - Tinggi lintasan bawah kira-kira: 360 mm - Panjang balok lintasan kira-kira: 2.400 mm - Jarak sumbu roda: 1.900 mm - Panjang gerak kait kira-kira: 6.000 mm - Sistem reeving: 2 / 1 - Kecepatan: - Troli kira-kira: 20 m/menit + 5 m/menit - Hoist kira-kira: 5 m/menit + 0,8 m/menit - Gerak crane kira-kira: 20 m/menit + 5 m/menit - Pengoperasian menggunakan remote control radio - Berat total – crane kira-kira: 1.600 kg

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys, up to a maximum of 350 x 350 mm. Standard equipment includes: - Powered chip conveyor, can be mounted on the right or left side of the machine - Vise clamping pressure regulation - Feed with vertical rollers for lateral material support - Sensors for material detection at the start - Clamping pressure regulation - Storage for up to 300 programs - The machine is available with either a 34 mm or 41 mm blade at no extra cost Knjdpfjfm T Hbsx Adwjd Price on request.

Kondisi: siap digunakan (bekas), Approx. 120 pieces = 480 linear meters of safety conductor rails Number of conductors/poles: 5 Knodjd Hurbspfx Adwjd in standard lengths of: 4 m Busbar cross-section: 10 mm² For mains voltage up to: 500 V Continuous current rating (100% duty cycle): 60 A Weight per meter: 2.1 kg

Kondisi: baru, Tahun pembuatan: 2025, EN-BEFARD XJ 55 is a device with a reach of over 13.0 m and a maximum lifting capacity of 2,400 kg. The unit is completely self-contained and independent. Power is supplied autonomously via the combustion engine (optionally also via 230V mains power). The device is equipped with radio remote control (for operator input). Knjdpfol Uvhbjx Adwjd Due to its weight, the trailer can be towed by almost any delivery vehicle and is fitted with two braked axles. • Maximum lifting capacity: 2,400 kg • Vertical reach of over 13.0 m – with search hook, reach approx. 14.0 m • Crane radio remote control • Four hydraulic extensions and one manual extension • Drive via combustion engine (optional additionally electric 230V) • Slewing column • Four hydraulically lowerable outriggers Additional, optional equipment: • Power supply via 230V mains (cable operation) • Search hook • Li-ion battery operation • Hydraulic winch 990 kg • Pads for support feet Available in the color of your choice.

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vises. + Feed system with vertical rollers for lateral material support. Knedsfg E Hzjpfx Adwjd + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: baik (bekas), jarak tempuh: 81.222 km, pendaftaran pertama: 08/2009, jenis bahan bakar: diesel, warna: putih, konfigurasi gandar: 4x2, bahan bakar: diesel, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: baja, Tahun pembuatan: 2009, Perlengkapan: ABS, kopling trailer,

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Sistem pengisian terdiri dari komponen-komponen berikut: 1. Palung melintang: Lebar palung: 2,8 m Knedpfx Aevrcfuedwjd Tinggi palung (sisi rendah): hanya 0,8 m Kedalaman palung: 1,2 m termasuk pelindung kisi atas termasuk motor gearbox ulir 3 kW tipe kiri dan kanan tersedia Opsional: sasis, dudukan forklift, ... 2. Sekrup pengangkat: Panjang: 2 m (panjang lainnya juga tersedia) Kemiringan dapat disesuaikan termasuk motor gearbox ulir 3 kW 3. Sekrup penekan: Panjang: 2 m (panjang lainnya juga tersedia) Terbuka di bagian depan Semua sekrup berdiameter 200 mm dan sepenuhnya dilas pada pipa baja! (diameter sekrup yang lebih besar juga tersedia atas permintaan!) Tanpa pengkabelan dan panel kontrol Kami juga dengan senang hati menawarkan produksi khusus! Harga belum termasuk PPN.

Tahun pembuatan: 1997, Kondisi: baik (bekas), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via gear motor Kjdpfx Adet S Sxgjwjnd

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, NEW – Electric Chamber Furnace KM Pro with Full Equipment (Touch Control – KM Pro) We are pleased to offer you our KM Pro chamber furnace for component dimensions up to 4000 mm (L) x 1600 mm (W) x 2000 mm (H). As a leading manufacturer of surface technology systems, we provide an almost limitless portfolio for powder coating applications. At our facility in 47669 Wachtendonk, we turn your individual requirements into reality and manufacture your tailored solution. Knedpstxcrfefx Adwed Thanks to our in-house production of nearly all components, we are flexible and able to address your specific needs. With us, you receive not only the ideal powder coating system, but also benefit from our comprehensive application expertise to support you with all surface technology matters. Every item offered here is custom made for you. No matter if your project is large or small, we deliver complete systems from a single source, tailored to your specifications. We look forward to hearing from you and implementing your ideas together! Technical data: - Heating medium: Electric - Heating type: Circulating air - Heating power: 60 kW (adjustable) - Circulating air fan motor: 3 kW up to 250°C - Connected load: 400 V, 100 A - Insulation: 150 mm compressed - Working dimensions: 4000 mm (L) x 1600 mm (W) x 2000 mm (H) - incl. signal light and horn for status indication - 7-inch touch panel with intuitive operation - PLC control - Smart modes: Gelling and Open Door function with variable fan speed for energy and process optimization, Warm Up - Go Home startup planner, timer with completion notification per rail (each rail can be individually timed), temperature curve display - 7 rail passes provided (see image 2) - Loading via double-leaf doors on both sides (front and rear) - When used as a chamber furnace, one double-leaf door can remain closed. The product is also available in other variants (price depends on configuration): - Heating medium: Electric, Gas, Oil, Infrared, Wood chips, Hybrid, etc. - Combustion chamber sizes can be tailored to your requirements. - Continuous or chamber furnace - Loading via rack trolley, rail, or both options possible - Further automation available on request