Beli Sun Pdl 5000 bekas (6.797)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2D1-1116, tinggi total: 1.905 mm, lebar total: 1.626 mm, panjang total: 1.219 mm, berat keseluruhan: 725 kg, Dijual, seperti baru, sedikit digunakan, sangat presisi (±0,001 mm) mesin honing lubang otomatis lengkap dengan banyak instrumen presisi, perangkat ukur, dan banyak perlengkapan tambahan untuk honing lubang berdiameter D6 hingga D25 mm. Sudah terhubung ke jaringan listrik dan siap digunakan. Podpfxoy E N R Nj Al Iepr

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Well-maintained Sunnen honing machine with Felsomat loading system. Internal diameter range: Krossgrinding® tools: 5.46 to 32 mm with CGT tools TurboHone® tools: 3.81 to 32 mm with MMT tools Ppedpeud Nm Rofx Al Isr Connecting rod tools: 53.8 to 63.8 mm with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low-speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 strokes/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant tank capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, recommended 5.52 bar Temperature range: 0° to 35°C Floor requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 mm x H 1829 mm Colour: Pearl grey with pewter grey and burgundy decorative stripes Net weight: 1,579 kg Noise emission: < 71 dB (A) continuous load, < 75 dB (A) peak load Key features: Automatic setup: spindle speed, stroke speed, stroke length, feed rate and sparkout Automatic final machining: standard Machine operating modes: Automatic: Manual: Series production Single-piece production Clamping: optional

Kondisi: baik (bekas), Tahun pembuatan: 1970, diameter penggilingan: 1.200 mm, panjang penggilingan: 5.000 mm, Cylindrical Grinding Machine NAXOS UNION - KR 1250 / 5000 Centre height: 600 mm Grinding diameter Ø: 1200 mm Grinding length: 5000 mm Grinding wheel dimensions: 1600 x 100 mm Grinding wheel speed: 1620 rpm Length: 17500 mm Width: 5500 mm Height: 2200 mm Ppjdswrxqxspfx Al Ier Weight: 60000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 203214, berat benda kerja (maks.): 2 kg, kecepatan spindel (maks.): 3.700 rpm, diameter benda kerja (maks.): 150 mm, berat kosong: 1.579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air pressure requirement: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Stationary weight: 1,579 kg Installation area requirement: Minimum thickness 150 mm EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finish machining Machine operating modes: Automatic, Manual Ppedpfxexxkfxs Al Isr Series production Single-piece production Optional clamping

Kondisi: bekas, Mesin honing SUNNEN EC-35000CEM-26 Pjdpfx Ajxbtykol Iopr

Kondisi: bekas, Fungsionalitas: belum diuji, keyence-xm-5000-auktionsangebot Podpfx Aoy Iaayol Iopr

Kondisi: baik (bekas), Mesin press penjilidan buku 4 stasiun untuk pengelem blok MURO 4 x 5000 A4/HAD. Konstruksi kokoh, papan tahan air, dan komponen galvanis. Mesin dalam kondisi sempurna. Spesifikasi teknis: Format: 350x320x550 (L/P/T) Jumlah stasiun: 4 Daya listrik: 230V Psdpfsy Ehnaox Al Iepr Konsumsi daya maksimum: 4kW Bobot: 102kg Gaya penjepitan tinggi, roda gila dengan pegangan nyaman. Pengeringan listrik dengan dua tingkat daya: 2 dan 4kW. Setiap press dapat dimiringkan hingga 45°. Struktur dipasang pada roda untuk kemudahan pemindahan.

Kondisi: bekas, jarak tempuh: 21.520 km, daya: 103 kW (140,04 hp), pendaftaran pertama: 03/2023, jenis bahan bakar: diesel, berat kosong: 2.882 kg, berat muatan maksimum: 618 kg, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, suspensi: lain, jumlah tempat duduk: 4, panjang total: 5.985 mm, Tahun pembuatan: 2023, jumlah tempat tidur: 4, Perlengkapan: ABS, filter jelaga, kamar mandi, kantung udara, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, lampu kabut, pendingin udara, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: baru, Kesempatan: modul kaca dari pembubaran Swiss, 96 modul kaca Podpfx Asyxth Sel Iepr

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 500 kg, Meja putar pengelasan, manipulator L, pemposisi, kondisi terbaik, dengan cakram penjepit tambahan termasuk. Dapat berputar, mengayun (di atas kepala), kecepatan dapat diatur tanpa tingkat. Penyesuaian tinggi mekanis 800 mm - 1100 mm. Jangkauan 1000 mm. Tinggi konstruksi 1800 mm. Panjang 3000 mm. Lebar 1100 mm. Diameter cakram penjepit 1000 mm. Ppjdeylkn Ijpfx Al Isr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Mobile coil trolley FORSTNER AG 5000 b2mf 1500 Maximum coil width 1500 mm Load capacity 5000 kg Inner diameter 360 - 630 mm Outer diameter 1100 mm With 4-arm mandrel Double-mounted decoiler with hand brake and steel wheels for maneuvering Ppodsmv Hv Ajpfx Al Ier

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We are offering a highly productive 3D printer for industrial series production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling protocols and functional reports are available, confirming that the machine was operational before disassembly. All axes have been properly secured by professionals. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser operating hours: Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring options included Filter unit Accessories: 2 build cylinders 3 dosing cylinders 1 used overflow container 1 new overflow container Manuals 4 new heat exchangers 2 new Easy Filters Ppjdpfx Alsvu Syyo Ier 3 NTRON SIL02 oxygen analyzers with new sensors 1 new oxygen sensor And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the containers is also in stock and can be offered as an option. Faster to premium 3D components The highly productive, semi-automated TruPrint 5000 3D printing system is your entry into industrial series production. With features such as optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are fully equipped for demanding, industrial applications. The machine quickly and reliably produces high-quality parts from various metallic materials—meeting rigorous quality standards in tool and mold making, for 3D printing on preform blanks, as well as in aerospace and medical technology. Optionally, the entire process chain can run under a protective gas atmosphere: sieving, printing, cooling, de-powdering. Combined with external component and powder management and TRUMPF monitoring solutions, it's ideal for industrial series additive manufacturing. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. Additively manufactured structures are applied to a preform blank. This innovative option is especially suitable for simple handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm: Ø 300 x H 400, Ø 290 x H 390 (reduced with preheating >200°C) Processable materials: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate [2] cm³/h: 5 - 180 Layer thickness [3] μm: 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W: 3 x 500 Laser spot diameter [3] μm: 100 - 500 Min. detectable oxygen content ppm: Up to

Kondisi: bekas, Frequency inverter, frequency converter, drive inverter, controller, variable speed drive -Type: Microdrive-3 UDZ-70 Podedkqg Sspfx Al Ijpr -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -Current: 70 A -Dimensions: 440/145/H685 mm -Weight: 35 kg

Kondisi: sangat baik (bekas), Here we offer a SUN-TEC cleanroom technology heating plate. SUN-TEC cleanroom technology heating plate Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V 3-phase 50Hz 30A Ppoded Nfq Sspfx Al Ior Max. temperature: 200°C Type: Y9AT417 Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Kondisi: baik (bekas), Stainless steel tank 5,000 L with agitator and cooling. In good condition. Equipped with an integrated pipe around the tank for cooling. Podjvr E N Nspfx Al Ijpr

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: air, EN_FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) Podpfx Aljwbh Ife Iopr ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package standard from 1.5m ➤ Fronius trolley ➤ Fronius torch package ➤ Ground cable 3-4m ➤ Pressure regulator With this device, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. You only need an interface and the corresponding hose package for integration. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further extending the functions of the TPS unit. ----- IMMEDIATELY AVAILABLE PROPER INVOICE An inspection is possible in Vienna 1230, Austria! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What is the condition of the device? For your information, we purchase used equipment in almost-new condition, disassemble them, check everything thoroughly, replace wear parts if necessary, and only release them for sale after successful test welding. "All" devices are clean and have neither burn marks on the displays nor countless burn holes or dents on the machine! You are buying an item from us that is presentable and does not look worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice for intra-community supply within the EU, provided the relevant requirements are met. ►►►What payment options are available? Prepayment or cash on personal pickup ►►►Is insured shipping possible? Yes, we are happy to send your purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately do not have the leeway to offer a warranty. However, the devices can be tested on-site and paid for in cash. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We know these units inside out and do not sell anything we are not familiar with.

Kondisi: seperti baru (mesin pameran), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard configuration with Flow Control, Thermal Control, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features add approximately €400 in value at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical; in our opinion, the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, Long – Each machine is supplied with a 5-meter-long connection hose package between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach work areas! The connection hose is neatly stored on a hook at the side of the unit. (Hooks manufactured by us) ➤ Fronius Large Trolley – Arguably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With Up/Down current regulation on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This set can weld nearly all materials, including aluminum, steel, and stainless steel (V2A). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in the sheet metal trade. Other options available at extra cost, e.g. Fronius Aw4000/Aw5000 Job Master Torch Package (torch with display) + €550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ Ppodpfx Alswbil Se Ijr We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? To clarify, we purchase almost-new pre-owned machines, disassemble, check everything thoroughly, replace any wear parts as necessary, and only after successful test welding release the machine for sale. "All" machines are clean and have no burn marks on the displays, nor are they riddled with burn holes or dents! You are purchasing an item from us that is also ⭐visually appealing and not completely worn down! ►►►Do we get an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►What payment methods are available? Advance payment or cash on collection in person. ►►►Why buy from us? We are professionals specializing in this Fronius welding machine series and always keep 60–80 machines in stock – exclusively Fronius, no other brands! We know these machines inside and out and do not sell anything we are not familiar with.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 180 mm, diameter putar di atas sled silang: 212 mm, lubang spindel: 52 mm, panjang pembubutan: 1.000 mm, gores kuas bulu: 152 mm, diameter quill: 52 mm, diameter pembubutan: 360 mm, hidung spindel: ASA D1-6, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 20 rpm, berat keseluruhan: 1.470 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, SUN MASTER RML-1440V adalah mesin bubut universal presisi berkecepatan tinggi yang dirancang untuk pembubutan, pemotongan ulir, dan pekerjaan logam umum secara akurat. Mesin ini dilengkapi dengan rangka utama dari besi cor yang kokoh, landasan yang telah dikeraskan dan digiling, spindle bertenaga dengan kecepatan variabel dan kepala gear dua rentang (20–400 / 400–2500 RPM), serta hidung spindle tipe D1-6. Pjdpfx Asxyh Nqol Ispr Mesin bubut ini juga memiliki gearbox quick-change penuh, feeding otomatis untuk eretan dan alas lintang, dudukan pahat 4-arah, tailstock dengan sumbu MT4, rem kaki, fungsi kecepatan permukaan konstan (CSS), sistem pendingin, dan sistem pelumasan terintegrasi. RML-1440V menawarkan kinerja stabil, kontrol presisi, dan fleksibilitas baik untuk produksi maupun aplikasi bengkel. Mesin berada di gudang kami dan siap dikirim kapan saja.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, nomor mesin/kendaraan: B0508A0463, TRUMPF TruBend Cell 5000 – Komórka do gięcia z robotem | Rok produkcji 2015 Prasa krawędziowa TruBend 5230 System gięcia zrobotyzowanego BendMaster System sterowania: TASC 6000 (programowanie robota i prasy poprzez interfejs maszyny) Parametry prasy krawędziowej: Pjdpfx Asw Eilysl Iepr Siła nacisku: 230 ton Długość gięcia: 4250 mm Rok produkcji: 02.2015 Numer seryjny: B0508A0463 Przebieg roboczy: Czas pracy maszyny: 33 789,3 h Układ hydrauliczny: 8 528,8 h Czas pracy belki dociskowej: 1 119,9 h Opis: W pełni zautomatyzowane rozwiązanie do gięcia – TruBend Cell 5000 przeznaczona jest do produkcji wielkoseryjnej oraz wymagającej wysokiej precyzji. Zintegrowany robot zapewnia wydajne gięcie przy minimalnym udziale operatora. Stan: bardzo dobry, regularnie serwisowana Demontaż, załadunek oraz transport mogą być zorganizowane

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Pusat Mesin Horizontal DMG MORI NH 5000DCG/40 Tahun 2018 Perjalanan X 730 Y 760 Z 850 mm Sumbu C penuh, resolusi 0,001 derajat MAPPS FANUC Spindel 14.000 rpm 37/22 KW pada 303 Nm Ppjdpfx Aoyt Iubsl Isr Tirus HSK-A63 60 ATC Palet 500 x 500 mm

Kondisi: bekas, Tahun pembuatan: 2011, Palet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Ukuran detail maksimum: Ø 800 x 1000 mm Kapasitas beban maksimum: 700 kg Kecepatan spindle: 12.000 rpm - Torsi tinggi Daya spindle: 22/30 kW, 300 Nm (AC40HP) CAT 40 Pengganti alat: 40 posisi Antarmuka untuk sistem pendingin Persiapan untuk probe OMP60 Konveyor Cromar Tapping sinkronisasi Kemiringan G00 konstan EIA Pedpjy H Dnxsfx Al Iopr EIA 3D COMP Scaling Termasuk pemuatan mesin Termasuk alat dan blok Mazak HC Nexus 5000-II: P x L x T: 475 x 238 x 285 cm Palet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Kapasitas beban maksimum: 700 kg Pengganti alat: 40 posisi

Kondisi: baik (bekas), Tahun pembuatan: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm - traversing - new inverter device - in good condition. Podpfx Alsrtncce Ijpr

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Daya Tekan: 220 kN Ketebalan Plat: 8 mm Area Kerja: 2535x1280 mm Ketebalan Plat pada Baja Tahan Karat: 4-6 mm Psdpfxoyrcyce Al Ijpr Aksesori: - Kaset pengaturan - Meja dengan roda bola - Jam operasional: 97.000

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 42L09420, de-Hankook Protec 9NC x 5000 CNC-Drehmaschine mit Fanuc 32i Steuerung und großem Spindeldurchlass. MASCHINENAUFBAU & AUSSTATTUNG - Schweres, einteiliges Gussbett - Gehärtete und geschliffene Präzisionsführungen - 2-stufige manuelle Gangschaltung - Massiver Reitstock TECHNISCHE DATEN Max. Umlauf über Bett Ø 950 mm Max. Umlauf über Support Ø 630 mm Futterdurchmesser Ø 32'' Spitzenweite 5000 mm Werkstückgewicht zwischen Spitzen 5000 kg SPINDEL Drehzahlbereich: 2 – 630 min⁻¹ Spindelbohrung: Ø 254 mm Spindelaufnahme: A2-15'' Schaltbereich: Manuell, 2-stufig Reitstockkonus: MK 6 SCHLITTEN Revolverkopf: Automatisch, V8 Werkzeuggröße: 32 x 32 mm X-Achsenweg: 535 mm Z-Achsenweg: 4845 mm Eilgang X-Achse: 4 m/min Eilgang Z-Achse: 6 m/min REITSTOCK Pinolendurchmesser: Ø 180 mm Konusaufnahme: MK 6 Max. Pinolenhub: 250 mm BETT Breite: 630 mm Länge: 6715 mm MOTOREN Hauptspindel: 30/37 kW Vorschub X: 1,8 kW Vorschub Z: 4,2 kW STROMVERSORGUNG Anschluss: 415 V, 3 Phasen, 50 Hz ABMESSUNGEN & GEWICHT Länge: 7470 mm Breite: 2205 mm Höhe: 1890 mm Gewicht: 10.280 kg STANDARD-AUSSTATTUNG • Fanuc 32i-A CNC-Steuerung • Reitstockkonus MK 6 • 4-Backen-Futter, unabhängig • Automatischer Spindelstufenschalter • Eingebaute Mitlaufspitze • Kühlsystem • 2-Gang-Reitstockspindel • Arbeitsleuchte • Hauptmotor & elektrische Ausstattung • Zentrierspitze • Futterabdeckung Sonderzubehör/Ausstattung: - Vollverkleidung hinten (5000 mm Spitzenweite) - 4-Backen-Futter & Flansch Ø 32'' (Bohrung Ø 254 mm) - Lünetten (Rollenbacken) Ø 250–450 mm & Ø 450–650 mm - Mitlaufende Zentrierspitze MK 6 - Automatischer Werkzeugrevolver V8 (elektrisch) als Ersatz für manuelle Ausführung H-4 - 3 Außendrehhalter - 3 Bohrstangenhalter Ø 63 mm Ppedpswcq Tmsfx Al Ijr - 2 Planhalter - Bohrstangenvorrichtung Ø 150 mm (Stange exkl.) - Späneförderer 5000 mm - Transformator gemäß CE - Spindelmotor-Upgrade 30/37 kW Fanuc Option A (inklusive folgender Funktionen): - Spindelorientierung - Dynamische Grafikdarstellung - Kontinuierliches Gewindeschneiden - Custom Macro B - Erweiterte Programmbearbeitung - Tape Memory 320M - Inch/Metric-Umschaltung - Manual Guide i - Programmwiedergabe - Programmierbare Dateneingabe - Betriebsstunden- & Teilezähler - Werkzeugkorrekturen (32 Paar) - Variabler Gewindetrieb - Grafikfunktionen - Spindelpositionierung - Programm-Neustart - Externe Dateneingabe

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Kombinationseinheit: Hersteller: GSG Vorschub: Typ: 840.02-027 Zerkleinerer/Entschupper: Typ: 663.02-017 Drahtbereich: Ø5,5–16 mm Für Walzdraht mit ca. 40–60 daN/mm² Festigkeit Zerkleinerungs- und Biegerollen: Hartmetalleinsätze Verstellung mittels 0,37 kW – 1,15 A Getriebemotor Bürstenantrieb mit 0,25 kW Getriebemotor, n=293 U/min Anschlussspannung: 380–420 V, 50 Hz Trockenschmiereinheit: Typ: BSG/T Befüllung: Calciumstearat (z.B. Traxit Typ: D S 51 E) Stearatverbrauch: ca. 350 g pro t Draht Ziehgeschwindigkeit: max. 15 m/s Elektrische Leistung: 2x 0,55 kW Getriebemotoren Kassette: 2 Steckplätze (geliefert mit 1x Rollenblock + 1x Kassette) Typ: PKG/T (TS) Gereinigter Walzdraht Drahtfestigkeit ca. 40–60 daN/mm² Drahtbereich max. Einlaufdurchmesser 9,5 mm, Fertigdurchmesser 3,5–8,5 mm Rollendurchmesser min. Ø115 mm, max. Ø125 mm, Bohrungsdurchmesser Ø82 mm, Breite 15–25 mm Kühlstiftdurchmesser 25 mm Kühlwasserverbrauch ca. 600 l/h Ziehmaschine: Hersteller: Koch Typ: KHZ 5000 Baujahr: 1993 Podor Nfvmjpfx Al Iopr Seriennummer: 13.821 Anzahl der Züge: 1 Zug pro Block Ziehscheibe: Ø700 mm Zugkraft: mechanisch 5.000 N Drahtmaterial: weiche Stahldrähte Einlaufzugfestigkeit: ca. 40–45 daN/mm² Max. Ziehbereich: Einlaufdurchmesser 5,0–8,5 mm Querschnittsreduzierung: 20 x 25 % (mechanische Staffelung) Ziehgeschwindigkeit: bis max. 7,0 m/s Bremse: Twiflex, Typ: MRB Antrieb: Drehstrommotor/Frequenzumrichter, Siemens PN=110 kW, n=1.485 U/min Spuler: Hersteller: Koch Typ: KHS 1250 Baujahr: 1993 Fabrik-Nr.: 13741 Drahtdurchmesser: 5–8,5 mm Festigkeit: ca. 55–70 daN/mm² Wickelgeschwindigkeit: V=7 m/s, abgestimmt auf die Ziehmaschine Befüllungsgewicht: ca. 3.000 kg Spulenantriebsmotor: Drehstrommotor mit Außenlüfter Typ: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1.000–2.000 U/min, IP54, Bauform B3 Lageantriebsmotor: 66-671U, 1,5 kW, 170 V, 9,8 A, 1.680 U/min, IP44, B5-200 Mit angebautem Tachogenerator TG 20, 20 V / 1000 U/min Mit angebautem Stirnradgetriebe SK 32, i=57,53, Bauform B6 Hydraulik: Hydraulikbagger Typ: H13 AK Pneumatik: Twiflex-Scheibenbremse Typ: MRB Pneumatikzylinder Typ: SPWG 28032-25mm Hub Abmessungen: 3.100 x 3.000 x 1.700 mm (L x B x H) ohne Gegengewicht