Mesin pemintal OE

W. Schlafhorst & Co AUTOCORO ACO 240

Kondisi: bekas, Tahun pembuatan: 1961, de2c1c73 Fedpfx Adowwl I Ioqogh

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 18891, Towing capacity: 10 tons. Lift: 1000 mm Fedpfxebrcmke Adqegh 3 broaching stations With chip conveyor + platform for above-floor installation and safety door

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Fgjdpfow E Nnbjx Adqoh Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Produktionslinie, hergestellt von der kanadischen Firma Brunette, die sich durch außergewöhnliche Leistungsfähigkeit und Langlebigkeit auszeichnet. Fgjdjvu D Dwepfx Adqsh Das Angebot umfasst einen Entrindungsautomat mit Zuführtischen, Rindenabfuhrförderern sowie einen Hacker mit einer installierten Leistung von 630 kW und einem Doppelschnecken-Entladeförderer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Fgedpfx Adoht Hg Dsqoh Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: baik (bekas), Tahun pembuatan: 2002, Diameter benda kerja: 40 mm Modul – maks. 2 Modul – min. 0,1 Panjang benda kerja – maks. 665 mm Berat: 4,5 ton Diameter lubang spindel: 30 mm Sistem kontrol: Siemens Diameter bantalan pahat: 20 mm Total kebutuhan daya: 5,5 kW Data teknis Modul maks.: 2 Pitch: 0,5 – 25 mm Jumlah gigi: banyak/multipel Diameter benda kerja maks.: 40 mm Panjang benda kerja maks.: 180 mm Diameter pahat maks.: 80 mm Lebar pahat maks.: 12 mm Sumbu Z (panjang pemotongan dengan center tirus): 90 mm Sumbu Z (panjang pemotongan tanpa center tirus): 113 mm Fodpfxjv Ucdvo Adqogh Sudut putar kepala pemotong: 30° / 30° Deskripsi Mesin untuk membuat roda gigi dan memotong ulir: LAMBERT - 124 CNC Mesin dalam kondisi terawat dengan baik.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F39033, KEKEISEN universal bed-type milling machine UBF 2000/13, machine no. F39033; year of manufacture: 1996 Well-maintained, very good condition, partially mechanically overhauled and tested in 2025 2-axis universal milling head, automatically adjustable, with Hirth coupling lock Intermediate positions adjustable in 1° increments via jog mode Tool holder SK50 according to DIN 69871/872 Longitudinal travel (X-axis) 2000 mm Cross travel of spindle head (Y-axis) 1000 mm Vertical travel of spindle head (Z-axis) 1300 mm Machine table size 2200 x 960 mm, with T-slots 22 mm, spacing 140 mm Max. table load 5000 kg Spindle drive power 30 kW (100% duty cycle), max. torque 1180 Nm Spindle speed 20 – 3800 rpm (infinitely variable in 2 ranges), with oil cooling Axis feed rates 4 m/min or 10 m/min rapid traverse CNC control Heidenhain TNC 426 CA with electronic handwheel HR 330 Drive technology by Baumüller Coolant system with internal coolant supply up to 16 bar. Switchable air/water Purolator dual change-over filter with 200 l collection tank Tool changer with 30 stations Fully enclosed work area, open at the top, with longitudinal chip conveyor Electrical connection data 400 V; 50 Hz; approx. 55 kVA Fedpfx Aoykuxhedqjgh Supplied without installation elements (mounting feet)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17004A, Diameter batang (maks.): 20 mm, Dijual: dua unit Tsugami HS20M 5-axis dalam kondisi operasi penuh. Semua fungsi berjalan normal, mesin baru saja diservis dan dicek secara teknis. Termasuk: berbagai dudukan alat (tool holders) dan dokumentasi teknis lengkap. Mesin ini sebelumnya digunakan terutama untuk produksi implan gigi dan dibeli dari Swedia. Jika berminat, silakan hubungi saya untuk detail lebih lanjut, foto, harga, atau untuk menjadwalkan inspeksi. Fgodpfx Asyghcrodqoh

Kondisi: sangat baik (bekas), Printer 3D Logam Produsen: CONCEPTLASER Tipe: M1-2010-01-01 Tahun pembuatan: 2010 Volume cetak: 250 x 250 x 275 mm Udara tekan: 7 - 8 bar Gas inert: 5 bar Tegangan suplai: 3/N/PE AC400V+/-10% 50 Hz Fgedsxk T Ndopfx Adqoh Material: CL50WS: 50 kg dan CL91REW: 40 kg Perlengkapan: - 1 unit Rofin - Fiber laser StarFiber 200 dengan 200 W - 1 ruang proses (dapat diinertisasi) - 1 stasiun pemuatan - Generator nitrogen termasuk tangki tekanan 1000 liter - Stasiun ayak otomatis Conceptlaser (2 set material) - Vacuum cleaner tahan ledakan Produsen: Ruwac, Tahun: 2023 - Berbagai aksesori (filter, seal) - Jam operasi mesin: 16.620 jam - Jam operasi sumber laser: sekitar 11.000 jam

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Max. swing over bed: 32 mm Bar capacity: 32 mm Turning length: 125 mm Control unit: YASKAWA SIEMENS 840 DI V2 Clamping diameter: 32 mm Spindle speeds: 7,000 rpm Maximum workpiece length: 150 mm Feed rate: 0 - 2,000 mm/min Machine weight: approx. 5.7 t Space requirement: approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, fully operational, and comes complete with tool holders and spare parts. Fgodpfx Aevwgmysdqjh >> Two identical STAR 32T sliding headstock automatic lathes are available.