Konveyor sekrup baja tahan karat

Waeschle DST 150 2960/300/H600 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, hochrflexible-verpackungsmaschine Gbodpfx Aex I Ecmslkol

Kondisi: bekas, Tahun pembuatan: 2014, Robot industri Gedexuwlwjpfx Alkjbl Produsen: Kuka Tipe: KR210 R3100 ultra dengan sumbu linier 4,5m Tahun pembuatan: 2014 Jangkauan: 3.196 mm Berat: 1.154 kg Beban angkat: 210 kg Kontrol Kuka KRC4 Tahun pembuatan: 2014 Berat: 163 kg Perangkat lunak KSS 8.5.4 Kuka TouchPad KCP4 Kabel koneksi Kuka Sumbu linier Kuka Tipe: KL1500-3 T Tahun pembuatan: 2013 Panjang sekitar 4,5 m Jalur gerak sekitar 3,5 m Kabel carrier KRC4 Berat: 2.200 kg æ11526

Kondisi: baru, Tahun pembuatan: 2026, CNC drilling and milling machine Kudu with CNC control and tool changer (3-axis) Drilling and milling machine with movable processing unit – the table remains stationary, and the drilling head moves. The drilling unit can operate both manually and fully automatically. After each drilling cycle, the processing unit automatically moves to the next drilling position along the X and Y axes. Operation is designed for ease of use. Data transfer to the machine control is possible via DXF/DWG file formats using a programming station. Alternatively, programming can also be performed directly at the machine control unit. The system is highly robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drill head speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • X, Y and Z axis driven by servomotors • Rapid traverse in X axis: 20 m/min • Rapid traverse in Y axis: 5 m/min • Distance from table top to bottom edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St 50 (tool-dependent) • Tapping: M4 – M30 (with compensation chuck) • Y-axis travel: 300 mm • Positioning tolerance X axis: ±0.1 mm • Positioning tolerance Y axis: 0.06 mm • Positioning tolerance Z axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Compressed air connection: 8 bar • Front safety via light barrier • Rear access protection via safety fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming directly at the machine • Milling of elongated holes and circles • Lubrication via minimal quantity spray system • Without material clamping devices • Remote maintenance via Teamviewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions, rotational speed • Simulation of work processes • Digital handwheel Godpfxjfu Ivzj Alksbl Your benefits: • Workpiece surfaces are protected • Clear, graphical user interface • Machining directly at the workpiece end is no problem • 50% space savings compared to moving-table systems • Chips are collected in a chip tray • Easiest programming & operation • Minimal quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired system at any time in our production/showroom. Please feel free to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: baru, Klanke Supercut roll splitter for efficient shredding of waste rolls. Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order Price and further information upon request. We would be pleased to provide you with a non-binding offer. Gsdpfxsn I Rgps Alkobl

Kondisi: siap digunakan (bekas), Inkjet printer for frame bending machine Length: 800 mm Godshzgtujpfx Alkebl Width: 1000 mm Height: 1900 mm Weight: approx. 100 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. Gjdpfxovf E Avo Alkobl - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Tahun pembuatan: 1994, Kondisi: baik (bekas), Used M-Tec Ploughshare Mixer Model: MS-150 Batch Mixer Minimum mixing volume: 350 dm³ Maximum mixing volume: 1500 dm³ Motor: 37 kW, 115 rpm Gedpfx Aloir E E Eekebl Including Specicon sampling unit

Tahun pembuatan: 1997, Kondisi: baik (bekas), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via gear motor Gbjdjt S Sxgepfx Alksl

Tahun pembuatan: 2024, Kondisi: baru, Overband plate magnet with cleaning mechanism Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer Dimensions: 800 x 500 x 180 mm 4 x M16 lifting eyes on the rear side These two lifting magnets were previously used by one of our customers as 'police magnets' in the meat processing industry. Both overband magnets are in excellent condition. The stated price applies to one unit. Currently, 2 units available for immediate delivery from stock! All information subject to change, only while supplies last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competence is providing customers with exactly what they truly need. We work together with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Gbsdpfshfwmdox Alkjl Please feel free to contact us by phone as well to find a suitable solution for your application. Overband plate magnet Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 800 x 500 x 200 mm 800 x 520 x 250 mm Fully welded stainless steel housing to protect the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of collected foreign material. Suitable for installation above all types of conveyor systems...

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The machine in question is an HBC80 baler (45kW) with vertical tying. This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Following refurbishment, this baler is sold with a 2-year warranty included. Gbedpfx Aljtvat Tjkjl The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, * wire spool platforms.