Baler

Presona AB LP 85 VH1

Kondisi: baik (bekas), A-7577 Flødetank 10.000 L Rustfri procesflødetank, Hnodpfx Aeh E Dp Aocdek dobbeltkappet, fuldisoleret med skrabeomrører fra top, CIP-enhed monteret i toppen. 3 højdejusterbare ben, manhul i toppen. Kapacitet: 10.000 L. Vi kan tilbyde 2 stk. fra lager. Diameter: 2.458 mm

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 38 t, daya: 5,5 kW (7,48 hp), Neu auf Lager Avermann MPC 20 PEL Hsdpfx Acswhfu Aedsnk Optional mit Behälterlift

Kondisi: sangat baik (bekas), tekanan: 210 batang, Gaulin, Homogenizer model MC18 3TPSX. Edelstahlverkleidung, Hjdswf Itcspfx Acdenk zweistufige Hydraulikventilanordnung, 54 mm Kolben, mit Wolframkarbid beschichtet. Aseptischer Zylinderblock, Hubventile. Fernsteuerbare Einstellung und Auslesung des Homogenisierungsdrucks. Kapazität 6.000 l/h, 210 bar. Wartungshistorie verfügbar. Ersatzteile verfügbar. Hervorragender Betriebszustand.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 2.632 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 29.381, gaya penekanan: 35 t, lebar bukaan pengisian: 620 mm, panjang bukaan pengisian: 1.000 mm, lebar total: 2.380 mm, tinggi total: 2.500 mm, panjang total: 6.625 mm, Termasuk sabuk pengumpan. Mesin siap digunakan segera. Hnedpfjvaw T Aox Acdjk

Kondisi: belum diuji (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, panjang bal: 1.000 mm, lebar bal: 750 mm, tinggi bal: 750.750.750 mm, berat bal: 500 kg, tegangan masuk: 400 V, berat keseluruhan: 7.500 kg, kapasitas tangki oli: 500 l, daya: 30 kW (40,79 hp), berat kosong: 7.500 kg, frekuensi input: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feeding channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Hnodpfx Ajic Rl Djcdok Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is currently removed.

Kondisi: baru, Klanke Supercut roll splitter for efficient shredding of waste rolls. Hnodpfjn I Rgpsx Acdsk Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order Price and further information upon request. We would be pleased to provide you with a non-binding offer.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is an ultrafiltration/microfiltration unit DSS / Tetra Pak model UF/MF 6338 (Pilot) from 2010. The system is in excellent condition, fully operational, and ideally suited for pilot trials, product development, and the simulation of industrial process conditions on a smaller scale. Manufacturer: DSS / Tetra Pak Model: UF/MF 6338 (Pilot) Year of manufacture: 2010 *Feed rate: up to 3,550 l/h Retentate output: approx. 2,200 kg/h Permeate output: approx. 1,000 kg/h Number of filters: 6 pcs. Including Alfa Laval heat exchanger, 3-section design Feed pump: 5.5 kW, Alfa Laval LKH 25 Booster pump: 18.5 kW, Alfa Laval LKH 50 Condition: very good, fully functional * The specified parameters refer to the processing of cream into mascarpone. Hjdpfeyka Stjx Acdenk The UF/MF 6338 pilot plant stands out due to its robust design, reliable Alfa Laval components, and practice-oriented process control. With 6 filter elements and an integrated 3-section Alfa Laval heat exchanger, stable, temperature-controlled filtration is possible – ideal for applications where reproducible results and flexible parameter adjustments are essential. This unit is particularly attractive for dairies and food processing companies looking to test or optimize filtration processes (UF/MF) or develop new products – featuring DSS/Tetra Pak technology.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Hjdpfxevf E Ave Acdjnk Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HBC 140 2x75kW 2001 (210-008-01), gaya penekanan: 155 t, berat bal: 1.500 kg, tekanan: 250 batang, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, Verkocht door Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-rattenbekabeling 0 uur na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit bevat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na de demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende onderdelen: • Persplunjer • Frame • Kanaal • Voordruk-klep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventueel las- en herstelwerk worden alle onderdelen gestraald en opnieuw gecoat. Hnjdjtvau Aepfx Acdjk Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen en slangen worden vervangen. De hydraulische componenten worden gereviseerd. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en teruggeplaatst op eenvoudig toegankelijke posities. Slijtagedelen: Alle slijtagedelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtagedelen van (beide) naaldinstallaties en knopers worden vervangen. Cilinders: De cilinders worden gereviseerd en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (‘human interface’) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Kondisi: siap digunakan (bekas), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of residual materials (recyclables) in industrial and commercial settings: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials. Horizontal baler, DIXI 60 SLD waste press with tipper Technical specifications: - Pressing force: 60 tons Hnedpjra A E Uefx Acdjk - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800 x 1100 x 1200 mm - Number of ties: 3 - Bale weight: approx. 370-410 kg - Tying: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5420 kg - Average press cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD Baler Baler Technical Data Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4200 mm (+ cage 1600 mm) - Width: 1830 mm - Height: 2620 mm - Machine weight: approx. 8000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used