Peralatan pengecatan bubuk

Wagner

Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components:

Spray Booth: Prima Cube 16000
Powder Supply: Powder Center
Powder Recovery: Cyclon Filter 16000
Reciprocator: KHG 350

Production Line Configuration INCLUDES:

I. Specifications:
Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm

II. Equipment:

1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min

2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m:
- Loading zone length: 2.5 m
a. Washing, degreasing, and phosphating; length: 3.6 m
• Number of spray frames: 10
• Number of nozzles per frame: 18
• Total nozzles: 180
• Pump capacity: 162 m³/h
• Pump power: 15 kW
• Process tank: 4 m³ for active solution
• Integrated heat exchanger with LPG burner, 160 kW
• Operating temperature: 50°C
• Mechanical oil separator
• Solution filter
• Metering system with diaphragm pump and regulator
• Washing time: 3 minutes
b. Drip-off section, length: 3.1 m
• Drip time: 2 min 30 sec
c. Primary rinse; length: 1.2 m
• Number of spray frames: 4
• Nozzles per frame: 18
• Total nozzles: 64
• Pump flow: 38 m³/h
• Pump power: 3 kW
• Rinse tank: 1.5 m³
• Rinse time: 1 min
c. Drip-off zone, length: 3.1 m
• Drip time: 2 min 30 sec
d. Final rinse; length: 1.28 m
• Number of spray frames: 3
• Nozzles per frame: 18
• Total nozzles: 54
• Pump flow: 33 m³/h
• Rinse tank: 1.5 m³
• Pump power: 3 kW
• Spare spray frame included
• Nozzles per frame: 18
Ksdoww Adtepfx Ag Rolp
• Final rinse time: 1 min
e. Drip-off section, length: 2 m
• Drip time: 1 min 40 sec
- Three exhaust connections, each with ventilator
- Process chamber made of stainless steel
- Pipework in PVC or stainless steel
(1 unit)

3. Automatic Dryer after Washing AST-1-KLPG:
- Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm
- Air curtains on each side minimize heat loss
- One indirect heat exchanger (LPG), rated at 200 kW
- Three circulation blowers, total airflow 6000 m³/h each
- Two exhaust duct connections
- Temperature sensor and controller
- Overtemperature sensor
- Airflow monitoring sensor
- Chamber in galvanized steel
- 200 mm thermal insulation
- Drying time: 10 min
(1 unit)

4. Automatic Curing Oven APT-2-KLPG for Powder Coating:
- Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm
- Air curtain on one side to prevent heat loss
- Two indirect LPG-fired heat exchangers, each 300 kW
- Eight circulation blowers, 6000 m³/h each
- Two exhaust duct connections
- Temperature sensor and regulator
- Overtemperature sensor
- Circulation monitoring sensor
- Galvanized steel chamber
- 200 mm thermal insulation
- Curing time: 25 min
(1 unit)

5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes:
• Straight track with hangers, length: 146 m (hanger spacing 400 mm)
• Drive station: 2 units
• Tension station: 1 unit
• Chain lubrication station: 1 unit
• Structural drawings: 1 set

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.