Beli Wagner Peralatan Pengecatan Bubuk bekas (21.901)

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components: Spray Booth: Prima Cube 16000 Powder Supply: Powder Center Powder Recovery: Cyclon Filter 16000 Reciprocator: KHG 350 Production Line Configuration INCLUDES: I. Specifications: Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm II. Equipment: 1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min 2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m: - Loading zone length: 2.5 m a. Washing, degreasing, and phosphating; length: 3.6 m • Number of spray frames: 10 • Number of nozzles per frame: 18 • Total nozzles: 180 • Pump capacity: 162 m³/h • Pump power: 15 kW • Process tank: 4 m³ for active solution • Integrated heat exchanger with LPG burner, 160 kW • Operating temperature: 50°C • Mechanical oil separator • Solution filter • Metering system with diaphragm pump and regulator • Washing time: 3 minutes b. Drip-off section, length: 3.1 m • Drip time: 2 min 30 sec c. Primary rinse; length: 1.2 m • Number of spray frames: 4 • Nozzles per frame: 18 • Total nozzles: 64 • Pump flow: 38 m³/h • Pump power: 3 kW • Rinse tank: 1.5 m³ • Rinse time: 1 min c. Drip-off zone, length: 3.1 m • Drip time: 2 min 30 sec Fgsdpsww Adtefx Airoc d. Final rinse; length: 1.28 m • Number of spray frames: 3 • Nozzles per frame: 18 • Total nozzles: 54 • Pump flow: 33 m³/h • Rinse tank: 1.5 m³ • Pump power: 3 kW • Spare spray frame included • Nozzles per frame: 18 • Final rinse time: 1 min e. Drip-off section, length: 2 m • Drip time: 1 min 40 sec - Three exhaust connections, each with ventilator - Process chamber made of stainless steel - Pipework in PVC or stainless steel (1 unit) 3. Automatic Dryer after Washing AST-1-KLPG: - Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm - Air curtains on each side minimize heat loss - One indirect heat exchanger (LPG), rated at 200 kW - Three circulation blowers, total airflow 6000 m³/h each - Two exhaust duct connections - Temperature sensor and controller - Overtemperature sensor - Airflow monitoring sensor - Chamber in galvanized steel - 200 mm thermal insulation - Drying time: 10 min (1 unit) 4. Automatic Curing Oven APT-2-KLPG for Powder Coating: - Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm - Air curtain on one side to prevent heat loss - Two indirect LPG-fired heat exchangers, each 300 kW - Eight circulation blowers, 6000 m³/h each - Two exhaust duct connections - Temperature sensor and regulator - Overtemperature sensor - Circulation monitoring sensor - Galvanized steel chamber - 200 mm thermal insulation - Curing time: 25 min (1 unit) 5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes: • Straight track with hangers, length: 146 m (hanger spacing 400 mm) • Drive station: 2 units • Tension station: 1 unit • Chain lubrication station: 1 unit • Structural drawings: 1 set

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de Fgodpfx Ajvlwkxeirjc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.700 mm, lebar total: 2.490 mm, de Fsdpfx Aiszarzljrogc

Kondisi: baru, Tahun pembuatan: 2026, el-to-en Fjdpfoyaqt Tjx Airsgc

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Το σύστημα αφορά έναν βιομηχανικό φούρνο με συνολικές διαστάσεις 5000 × 2500 × 3200 mm, σχεδιασμένο για υψηλής απόδοσης θερμική επεξεργασία με μέγιστη αποδοτικότητα και αξιοπιστία. Η μονάδα είναι εξοπλισμένη με σύστημα αερίου λέβητα, ενσωματωμένο με τρεις ηλεκτροκινητήρες υψηλής απόδοσης που διασφαλίζουν ιδανική παροχή ισχύος και σταθερή λειτουργία υπό απαιτητικές συνθήκες. Αυτά συνδυάζονται με τρεις πτερωτές Ø452 mm, οι οποίες έχουν επιλεχθεί προσεκτικά για την επίτευξη άριστης ροής αέρα και τη μέγιστη μηχανική αποδοτικότητα σε όλο τον θάλαμο. Η κατασκευή του φούρνου είναι πλήρως κλειστή, με πάνελ μόνωσης υψηλής αντοχής 180 mm, σχεδιασμένα ειδικά για ελαχιστοποίηση θερμικών απωλειών, εξοικονόμηση ενέργειας και πλήρη στεγανοποίηση του θαλάμου. Αυτή η δομή εξασφαλίζει σταθερές εσωτερικές θερμοκρασιακές συνθήκες και βέλτιστο έλεγχο της διαδικασίας. Επιπλέον, το σύστημα περιλαμβάνει έναν προηγμένο πίνακα ελέγχου, παρέχοντας όλα τα απαραίτητα δεδομένα λειτουργίας και δυνατότητες ρύθμισης. Η διεπαφή έχει σχεδιαστεί με έμφαση στη φιλικότητα προς τον χειριστή και την ευκολία στη χρήση, επιτρέποντας αποδοτικό χειρισμό από το τυπικό προσωπικό χωρίς συμβιβασμούς στην ακρίβεια ή την απόδοση. Fgjdpfxjyzw E Hs Airoc

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.200 mm, tinggi total: 2.400 mm, lebar total: 1.700 mm, berat keseluruhan: 1.500 kg, Το σύστημα αυτό αποτελείται από έναν βιομηχανικό ηλεκτρικό φούρνο με εσωτερικές διαστάσεις 1700 × 3200 × 2100 mm, σχεδιασμένο για να προσφέρει σταθερή και αξιόπιστη θερμική επεξεργασία σε απαιτητικές εφαρμογές. Ο φούρνος τροφοδοτείται από μία υψηλής απόδοσης ηλεκτρική μονάδα boiler (2200 × 2100 × 300 mm), εξοπλισμένη με 3 συστοιχίες αντιστάσεων (σύνολο 9 θερμαντικά στοιχεία), με συνολική εγκατεστημένη ισχύ 27 kW. Η διαμόρφωση αυτή εξασφαλίζει ομοιόμορφη κατανομή της θερμότητας και επαρκή ενέργεια για σταθερή και αποδοτική λειτουργία υπό συνεχή φόρτο εργασίας. Για τη βελτιστοποίηση της εσωτερικής κυκλοφορίας του αέρα και της θερμικής απόδοσης, το σύστημα ενσωματώνει 2 φτερωτές Ø350 mm, οι οποίες κινούνται από 2 ηλεκτροκινητήρες ισχύος 1,5 kW έκαστος (2 HP). Η διάταξη αυτή διασφαλίζει αναβαθμισμένη κυκλοφορία του αέρα, συμβάλλοντας στην ομοιογενή κατανομή της θερμοκρασίας σε όλο τον θάλαμο. Ο φούρνος είναι πλήρως μονωμένος με πάνελ υψηλής πυκνότητας πάχους 180 mm, τα οποία μειώνουν σημαντικά τη θερμική απώλεια, διασφαλίζοντας μέγιστη ενεργειακή απόδοση και απόλυτη στεγανότητα του θαλάμου. Η κατασκευή αυτή υποστηρίζει σταθερές συνθήκες λειτουργίας και ελαχιστοποιεί την κατανάλωση ενέργειας. Επιπλέον, η μονάδα διαθέτει προηγμένο πίνακα ελέγχου με όλες τις βασικές λειτουργίες και παραμέτρους λειτουργίας. Το περιβάλλον χρήστη έχει σχεδιαστεί με έμφαση στην εργονομία και την επιχειρησιακή ευελιξία, επιτρέποντας στον χειριστή να ρυθμίζει και να ελέγχει εύκολα το σύστημα ανάλογα με τις εκάστοτε απαιτήσεις παραγωγής. Γιατί ξεχωρίζει το σύστημα: - Υψηλή ισχύς (27 kW) - Βελτιστοποιημένη κυκλοφορία αέρα (διπλός κινητήρας + φτερωτές) - Ενισχυμένη θερμομόνωση (πάνελ 180 mm) - Φιλικό και ολοκληρωμένο σύστημα ελέγχου Fodpjyzw Ihofx Airsgc - Σχεδιασμένο για αξιοπιστία, αποδοτικότητα και βιομηχανικές απαιτήσεις

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application Fgodpfjfz Dubox Airec The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: baru, Tahun pembuatan: 2026, powder_coating_booth_kpp_desc Fgsdpfjfy T Tbjx Airec

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Fedpfsfz Apqox Airegc Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Fgodpfx Asfz Dt Neirjc Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Fgsdofz I D Dspfx Airoc Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. Fgedpfx Aofz I Edjirec - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. Fsdpfsflmdwox Airsgc The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Fjdpfxsfzkrnj Airogc Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Fedpfxsfz Nb To Airjgc Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. Fsdpofz U Tiefx Airjgc New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Kondisi: bekas, Tahun pembuatan: 2018, en Fgedpfx Aioy Tn Atjroc

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, suhu: 250 °C, panjang dalam: 1.000 mm, lebar dalam: 1.000 mm, tinggi dalam: 1.500 mm, Hello, I am offering an Eliogtherm Kelvin curing oven / industrial dryer for sale. It is comparable to TRO ovens, Reinhardt ovens, or those from Nabertherm. This high-quality dryer can be used to cure or dry paints, coatings, powder coatings, and screen prints at temperatures of up to 250°C. The oven is also well-suited for preheating materials. It is certified for drying solvents, and the exhaust air is monitored by a pressure switch. The oven is very well insulated, not only at the walls but also at the bottom. Fresh air is filtered via a large filter to prevent dust particles from entering the oven. The internal dimensions are 1000 mm x 1000 mm, height 1500 mm. Extensive documentation, such as user manuals and wiring diagrams, is included with the oven. The oven is currently stored in our warehouse near Cham, in the beautiful Bavarian Forest—so a visit would be doubly worthwhile. We are happy to arrange shipping by freight forwarder, and on-site loading with a forklift is no problem. If you have any questions, please feel free to contact us. Fjdpfjy Svqiex Airogc

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.258 mm, tinggi total: 2.790 mm, lebar total: 2.370 mm, masa garansi: 24 bulan, tegangan masuk: 380 V, Perlengkapan: pencahayaan, en Fgjdpogf A Shsfx Airsc

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Το σύστημα αποτελεί μια πλήρως ολοκληρωμένη, αυτόματη βιομηχανική γραμμή βαφής με πούδρα, σχεδιασμένη για παραγωγή υψηλής απόδοσης, σταθερότητα διεργασίας και άριστη ποιότητα τελικής επιφάνειας. Συνδυάζει πολυβάθμιο χημικό πλυντήριο προεπεξεργασίας, θάλαμο ηλεκτροστατικής βαφής πούδρας υψηλής απόδοσης, ελεγχόμενο θερμικό κλίβανο ωρίμανσης και εναέριο σύστημα μεταφοράς με ράγες για συνεχή ή κατανεμημένη προώθηση τεμαχίων. Το χημικό πλυντήριο προεπεξεργασίας είναι σχεδιασμένο ως πολυσταδιακή μονάδα προετοιμασίας επιφανειών, που περιλαμβάνει στάδια απολίπανσης, ξεβγάλματος, φωσφάτωσης και παθητικοποίησης. Είναι κατασκευασμένο από ανοξείδωτο χάλυβα υψηλής ποιότητας (AISI 304/316), διασφαλίζοντας μακροχρόνια αντοχή στα χημικά και δομική ανθεκτικότητα. Φυγοκεντρικές αντλίες υψηλής πίεσης σε συνδυασμό με βελτιστοποιημένες διατάξεις ακροφυσίων εξασφαλίζουν πλήρη και ομοιόμορφη κάλυψη ακόμη και πολύπλοκων γεωμετριών. Το σύστημα ενσωματώνει κλειστό κύκλωμα ανακυκλοφορίας χημικών, προηγμένες μονάδες φιλτραρίσματος και αυτόματη παρακολούθηση pH, αγωγιμότητας και θερμοκρασίας λουτρού, διασφαλίζοντας σταθερή ενεργοποίηση της επιφάνειας με ελάχιστη κατανάλωση χημικών και παραγωγή αποβλήτων. Ο θάλαμος ηλεκτροστατικής βαφής πούδρας έχει σχεδιαστεί για μέγιστη απόδοση μεταφοράς και ελάχιστη απώλεια υλικού. Διαθέτει σύστημα ανάκτησης πούδρας υψηλής απόδοσης (τύπου κυκλώνα ή φίλτρων κασέτας), επιτυγχάνοντας ποσοστά ανάκτησης άνω του 95%, μειώνοντας σημαντικά το κόστος λειτουργίας. Ο θάλαμος φέρει αντιστατική κατασκευή για την αποτροπή συσσώρευσης πούδρας και τη διασφάλιση σταθερής κατανομής ηλεκτροστατικού πεδίου. Είναι πλήρως συμβατός με χειροκίνητα και αυτόματα συστήματα ψεκαστικών πιστολιών, επιτρέποντας ευέλικτη ενσωμάτωση ανάλογα με τις απαιτήσεις της παραγωγής. Ο κλίβανος ωρίμανσης αποτελεί υψηλής απόδοσης θερμικό σύστημα, σχεδιασμένο ώστε να παρέχει ομοιόμορφη κατανομή της θερμότητας σε όλο το θάλαμο με απόκλιση θερμοκρασίας εντός ±2°C. Λειτουργεί με υποχρεωτική κυκλοφορία αέρα χρησιμοποιώντας βιομηχανικούς ανεμιστήρες υψηλής απόδοσης, εξασφαλίζοντας ομοιογενείς συνθήκες ωρίμανσης για όλα τα βαμμένα τεμάχια. Το σύστημα θέρμανσης μπορεί να διαμορφωθεί για φυσικό αέριο, πετρέλαιο ή ηλεκτρικές αντιστάσεις, ανάλογα με την ενεργειακή υποδομή. Πάνελ υψηλής πυκνότητας μόνωσης ελαχιστοποιούν τις θερμικές απώλειες, ενώ ο PLC αυτοματισμός επιτρέπει ακριβή διαχείριση προφίλ ωρίμανσης και επαναληψιμότητα διαδικασίας, εξασφαλίζοντας άριστη διασταύρωση πολυμερούς και επιφάνειες χωρίς ελαττώματα. Το εναέριο σύστημα μεταφοράς με ράγες προσφέρει συνεχή ή βηματική προώθηση τεμαχίων καθ’ όλη τη διάρκεια των διεργασιών. Είναι κατασκευασμένο με αλυσίδες βαρέος τύπου και εξαρτήματα ανθεκτικά σε υψηλές θερμοκρασίες, κατάλληλα για απαιτητικά βιομηχανικά περιβάλλοντα. Διαθέτει μεταβλητό έλεγχο ταχύτητας για βέλτιστο χρονισμό παραμονής σε κάθε ζώνη επεξεργασίας, βελτιώνοντας την απόδοση και συγχρονισμό της παραγωγής. Η εργονομική σχεδίαση του ελαχιστοποιεί τη χειροκίνητη διαχείριση και μεγιστοποιεί τη σταθερότητα της ροής παραγωγής. Fgsdpfxjy Htg Ds Airjc Από μηχανολογικής άποψης, η γραμμή είναι σχεδιασμένη για μέγιστη επιχειρησιακή αποδοτικότητα, μειωμένο κόστος ζωής και υψηλή αξιοπιστία διαδικασιών. Ενεργειακά βελτιστοποιημένα θερμικά συστήματα, κυκλώματα ανάκτησης χημικών και τεχνολογίες υψηλής απόδοσης βαφής μειώνουν σημαντικά τα συνολικά λειτουργικά έξοδα, διατηρώντας σταθερή ποιότητα επικάλυψης. Η αρθρωτή αρχιτεκτονική επιτρέπει μελλοντικές επεκτάσεις και προσαρμογές, καθιστώντας το σύσ

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 1.500 mm, panjang benda kerja (maks.): 7.000 mm, en-sr-15-2024 Fsdpfx Aewvaaioiregc

Kondisi: bekas, Tahun pembuatan: 2011, Lini powder coating AABO Andersen Fedpfx Aieyrnh Esrogc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Vollständige Pulverbeschichtungsanlage mit automatischer Vorbehandlung und manueller Lackierung. Fgsdpfx Ajylmd Ejirec Max. Werkstückgröße (LxBxH): 3 x 1,5 x 2 m Max. Werkstückgewicht: 500 kg Raumgröße: mind. 12 x 24 m (Hauptbereich, ohne Förderanlage in anderen Räumen) Gasbrenner: 2 Stk. à 190 kW, 1 x 190 kW, 1 x 250 kW. Tatsächlicher Gesamtverbrauch ca. 300 kW Elektrischer Anschluss: 115 kW installiert / ca. 45 kW im Regelbetrieb Anlagenaufbau: Pos. 1. Manuelles Transportsystem – mit Stahlkonstruktion und 2 Hubwerken, 10 Tragstangen Pos. 2. Chemische Kammern, 2 Stk., mit Sprüh-Vorbehandlung und automatischer Bewegung Pos. 3. Umkehrosmoseanlage mit Wasserenthärter Pos. 4. Abwasseraufbereitungsanlage Pos. 5. Direkt gasbeheizter Trocknungsofen für Wasser Pos. 6. Pulverkabine mit 2 Nordson XT-Beschichtungseinheiten Pos. 7. Indirekt gasbeheizter Pulvereinbrennofen Pos. 8. SPS-Steuerungs-Paneel Die Anlage ist funktionsfähig und wird regelmäßig gewartet. Künftiger Service und Support in ganz Europa möglich. Das Layout kann an die Anforderungen angepasst werden. Die Linie kann in zwei Teile aufgeteilt und separat verkauft werden. Die Anlage wird Mitte Juli 2026 demontiert, eine frühere Lieferung ist nicht möglich. Eine Besichtigung und Betriebsprüfung vor Ort ist möglich. Wir bieten nur das Equipment oder auch einen vollständigen „Turn-Key“-Umzug in Ihre Räumlichkeiten und/oder die Stellung eines Montageleiters an.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, fr_FR Fodpfsvv H Uuex Airsgc

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: K974.016, Instalasi semprot plasma - Panel kontrol Comfort - Lemari pengatur gas untuk plasma - Sumber daya PPC 2002 NG Fgedpfjym Ay Eex Airsc - JamBox - Feeder bubuk PF 2/2 - Torch plasma - Set selang plasma dan kabel untuk 9MB - Chiller pendingin air Sigma 67-2K dengan 2 sirkuit pendingin untuk penggunaan terpisah torch 9MB dan TopGun - Lemari kontrol - Adaptor modem TS