Pengekstrusi

Weber DS120

Tahun pembuatan: 1985, Kondisi: baik (bekas), angebot-22556 Technical Data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 3,000 mm - Minimum cutting length at 90° + 45° 335 mm - Cutting range: see enclosed diagram - Swivel range inward, manual 90° – 22.5° Gjdpfxjimdlre Aa Hebt - Tilt range inward, manual 90° – 45° - Saw blade speed 2,800 rpm - Drive 380 V / 2 x 4,000 W - Compressed air connection 7 bar - Air consumption per cycle approx. 64 l - Space requirement approx. B 4,500 x H 1,950 x T 1,600 mm - Weight approx. 1,400 kg - Equipped with: - Adjustable cutting length with positioning control - Positioning control replaced around 2002 by WOLFF - Saw unit swivel and tilt function for tall and wide profiles, as well as compound cuts

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), 2054 1 used, partially refurbished and function-tested Alphatec extruder type AE-S 75.28 Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC motor Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Gbsdeiyya Aepfx Aa Hjt Control cabinet – NEW control – type Inspection possible at our facility in Wuppertal. Further extruders available.

Kondisi: bekas, Tahun pembuatan: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: Morse taper 4 Tailstock quill stroke: 180 mm Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.6 x 1.4 x 1.3 m Gbsdpfsu Ix Hdex Aa Hjt The lathe is equipped with a thread cutting device. It has new wiring and a newly built control cabinet. Emergency stop switch and chuck guard. 3-jaw chuck Ø 250 mm Live center Tool holding system: four-way tool post Compound rest swivels approx. 30° right/left Taper turning attachment (cone 15° right/left) 4 change gears included

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, de-to-hu Godpfx Aetqmmdsa Hsbt

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, 001 Gbodpfxjya Elds Aa Hst

Tahun pembuatan: 1990, Kondisi: baik (bekas), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is currently located at the machinery storage facility of Plastima Used Machinery. The equipment, a Haul-Off R630/6V model, dates from the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of construction: 1990 Voltage: 380 V Power: 4.5 kW Maximum pipe diameter: 110 mm to 630 mm Gbjdpfjrrv Uwjx Aa Hot

Tahun pembuatan: 1979, jam operasional: 216 h, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Parallel twin-screw extruder Manufacturer: Hans Weber Maschinenfabrik GmbH Model: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for rigid PVC profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10,000 Nm Motor power: 3.3 – 25.0 kW Gjdpfx Aaeyhcc Aj Hobt Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Die heating zones: 8 Temperature control: 12 x digital temperature controllers KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature probe Connected load: approx. 60 kW (without tooling) Extrusion height: 1000 or 1100 mm Output capacity: approx. 150 – 180 kg/h for rigid PVC profiles Accessories: Material hopper and connection fan Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), including material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder is freshly painted (light grey RAL 7035) and function tested.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 39.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, A used and fully functional profile extrusion line, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hrs Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely variable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Barrel heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control system: conventional control with digital temperature controllers Degassing: rotary vane vacuum pump Busch (1.5 kW) Maximum output rate: 120-150 kg/h for rigid PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: melt temperature sensor and melt pressure sensor Adapter between extruder connection and extrusion tool Used tooling kit for a window profile (re-extension), consisting of: - Extrusion die "re-extension", incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 inserts for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Godpfx Aaeyhcabj Hsbt Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 units, Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 units, Calpeda (each 1.1 kW) Belt haul-off, incl. integrated saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Belt width: 250 mm Max. pulling force: approx. 25,000 N Speed range: up to approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Kondisi: baik (bekas), Tahun pembuatan: 1989, jam operasional: 24.048 h, Herkunft Hans Weber Maschinenfabrik GmbH Typ DS 8.7 Seriennummer DS 85 777 Ausführung Doppelschnecke Godpfozuk Hbjx Aa Hebt Baujahr 1989 Betriebsstunden 24.048 Std. Schneckendurchmesser 87 mm Anschlussleistung 90 kW