Pusat permesinan dengan meja konsol

WEEKE BHC 500

Kondisi: bekas, nomor mesin/kendaraan: 008205, Arbeitsbereich Achse X: 4250 mm Fodpfxox A Th Rj Adtspb Arbeitsbereich Achse Y: 1320 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Anz. kontrollierte Achsen: 4 Achsen Anzahl Bohrspindeln: 31 Anzahl Werkzeugplätze: 22

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Fpedpfx Adod Hz Nijtsb Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm • X-axis support: 3000 mm • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h

Kondisi: bekas, Tahun pembuatan: 2002, Pusat Pemesinan Pabrikan: Weeke Tipe: R BHC 500 Tahun pembuatan: 2002 Mesin tiga sumbu Kepala bor rusak – tidak berfungsi Luas area kerja: 3.250 x 1.300 mm Fpjdpjxl Rxrofx Adtsb Dijual tanpa alat. Mesin sudah dibongkar.

Kondisi: bekas, Bandsaw Centauro mod. CO 800 – used Fsdsr Ilxcopfx Adtopb

Kondisi: baru, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Impressive compressed air quality. Cyclone separator and refrigeration dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Speed-regulated with frequency inverter Controller: Graphic controller C55DD Refrigeration dryer: Integrated, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Rated motor power: 15 kW Oil quantity: 5.2 l Dimensions and Weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l Fpsdeixt I Hepfx Adtjb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Automatic wide belt sander with 2 belts for lacquers, wood, veneer, composite materials, and various other materials Machine can be integrated into a production line Technical data: Working width: 1350 mm Maximum usable height: 130 mm Belt size: 2450 x 1350 mm Configuration: 1st unit: Sanding roller, diameter 320 mm - grit 60 - cleaning belts for blower - 11 kW motor with variable speed drive 2nd unit: Sanding roller, diameter 320 mm - grit 40 - cleaning belts for blower - 11 kW motor with variable speed drive Scotch-Brite unit - 1.5 kW motor Vacuum table Belt speed variator: 4–19 m/min Operating pressure: 7 bar External dimensions: Machine 2000 x 2750 x 2200 mm Fpodpfx Aegmbu Iedtsb Vacuum pump: 800 x 700 x 900 mm (H)

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) Fsdpfx Asrmucxsdtepb - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: bekas, Tahun pembuatan: 2008, Biesse Rover A 3.40 FT - NBC 412 Automatisierte Nestingzelle Beschreibung: Rover A 3.40 FT Zentralisiertes automatisches Schmiersystem 8 vordere Anschläge + 8 hintere Anschläge mit Sensoren 1 rechter Seitenanschlag mit Sensor Vakuumsystem für 2 Pumpen à 300 m³/h 12 kW (16,1 PS) Elektrospindel mit ISO 30 Aufnahme, luftgekühlt Blaseinheit Bohrkopf BH 18 A Revolver-Werkzeugwechsler mit 10 Positionen Numerische Steuerung XP600 BiesseWorks - Advanced – Maschinen- und Büroversion BIESSE NEST Modul Be- und Entladearm, auf Querträger der Maschine positioniert Be- und Entladetisch, auf der linken Maschinenseite CE-Sicherheitsvorrichtungen Drehkolben-Vakuumpumpe Mechanischer Andrückring mit pneumatischer Absenkung, für Nesting-Anwendungen Fedpfx Adewh Sfzjtepb (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994,

Kondisi: bekas, nomor mesin/kendaraan: 008131, max-breite-paneel-4400-mm Fpjdpfx Adew Idh Hsteb