Mesin bor multi-spindle

WEEKE BST 500 D

Kondisi: belum diuji (bekas), Tahun pembuatan: 2016, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 22 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, The machine has the following configuration: Pre-milling unit Automatic, time-controlled intervention and positioning via NC Lamps for preheating the panel edge Edge tape magazine Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Finishing and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, time-controlled intervention Cut-off saw RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm Dodpeyxndbofx Ahuekk MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7673

Kondisi: belum diuji (bekas), Tahun pembuatan: 2012, Fungsionalitas: belum diuji, lebar pemotongan (maks.): 4.500 mm, kecepatan pemakanan sumbu X: 140 m/menit, panjang bagian (maks.): 2.200 mm, Perlengkapan: Penandaan CE, doser, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (pre-scoring unit): 200 mm Saw blade projection: 95 mm Number of longitudinal saw grippers: 5 Number of cross-cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Pre-scoring unit 1 connected load: 2.2 kW Pre-scoring unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible pusher system Dkjdpfx Aoyxn Adohusk Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5711

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, kecepatan pemakanan sumbu X: 30 m/menit, model controller: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cutting unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge pull scraper Manufacturer model: 08.519 Unit: Glue pull scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for edge banding rolls Tank for hot-melt adhesive Pressure roller unit for the edge Pressure with rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and use of the machine at the destination. Dkedpeyzy Iwjfx Ahuek External reference: 6089

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.400 mm, jarak lintasan sumbu Y: 1.300 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 45 m/menit, Perlengkapan: Penandaan CE, The machine has the following configuration: Drilling units: Upper group with 30 vertical and 6 horizontal spindles Milling unit 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Travel speed X-axis: 40 m/min Travel speed Y-axis: 45 m/min Travel speed Z-axis: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Dsdpfxsyzy S No Ahuskk Machine programming software: XILOG Single vacuum pump capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Work table with suction bars Number of suction bars: 8 Vacuum clamping for the workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8340

Tahun pembuatan: 2007, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang total: 5.700 mm, lebar total: 1.000 mm, panjang benda kerja (maks.): 2.000 mm, lebar benda kerja (maks.): 800 mm, Perlengkapan: Penandaan CE, 1 Dkedpfx Aheyzzhxoujk

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Djdsh Ryhnepfx Ahuskk Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: diremajakan ulang (bekas), PC control: Power Control Professional type Software: woodWOP / TopDrill BST No. 2 through-feed motorized conveyor belts (4 x kW?) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units per lower vertical drilling support (2 x 1.5 kW) Various spindles for each lower drilling support unit No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units per upper vertical drilling support (2 x 1.5 kW) Various spindles for each upper drilling support unit No. 4 upper vertical workpiece clamps Chip conveyor belt Dkedpfjdz Uk Tex Ahuok Total connected load (kW): 36