Mesin bubut LZ

Weiler Condor 81

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross-slide: Ø 180 mm Centre height over cross-slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Tjdpfx Ajvadqzeaiob Equipment & accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick clamping unit and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost, size B - LED work lamp - Bed stop - Automatic longitudinal and facing feeds - Electro-mechanical spindle brake, switchable - 2x Emergency stop - Electronic chuck key interlock (via sleeve with switch) - Coolant tank with pump integrated in machine base - Hinged chuck guard - Splash guard panel - Circuit diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very user-friendly and robust. The machine can be demonstrated under power on site. All information is without guarantee. Subject to prior sale.

Kondisi: baru, Tahun pembuatan: 2025, Yanigav Bor Tanah TAM 245 Tjdpfor Eznisx Aaiob • Penambatan tiga titik yang sederhana • Rangka sangat kokoh, dilas • Gearbox serbaguna dan bertenaga, dari 30 hingga 90 HP • Diameter mata bor tanah yang dapat digunakan: 10 cm hingga 80 cm dengan tinggi maksimal 1,80 m • Pergeseran 1,30 m di setiap sisi sumbu • Rangka dengan panjang 245 cm • Koreksi kemiringan auger (depan/belakang dan kanan/kiri) • Bor tidak termasuk

Kondisi: bekas, en-001 Tedsk S Ht Ajpfx Aaisb

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable Tjdpfx Aaewrm Dteieb >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: bekas, Tahun pembuatan: 2000, gebrauchte-condor-ac-teilueberholt Tedpfex E Um Njx Aaieb

Kondisi: bekas, Tahun pembuatan: 2006, Technical details: X-axis travel: 1000 / 600 mm Y-axis travel: 570 mm Z-axis travel: 570 mm Control unit: Fagor 8055 MC Tool magazine with: 24 stations Tool holder: SK 40 Spindle speed: 10,000 rpm Spindle taper: SK40 Infinitely variable feed rates X/Y/Z: 10 m/min Rapid traverse X/Y/Z: 24 m/min Operating hours / Power-on hours: not visible Table size: 1200 x 500 mm Table load capacity: 800 kg Distance spindle nose to table: min./max. 100/670 mm Interface: 232 Total power requirement: 15 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 3.3 x 2.3 x 2.8 m Tsdpfx Aju Idfroaijb Equipment: - Coolant system with supply to the spindle (no internal coolant supply) - Control panel with hand-held control unit - Chip conveyor - Electrical cabinet with Rittal SK 3305500 cooling unit as per attached photo.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Tedpfxexcuaze Aaijb Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 950 kg, Panjang sabuk amplas 2200 mm, lebar sabuk amplas 400 mm, panjang meja 1200 mm, tinggi kerja 120 mm, lebar pengamplasan 390 mm, kecepatan sabuk amplas sekitar 21 m/detik, kecepatan pemajuan 6 - 11 - 16 m/menit, motor penggerak 7,5 kW, motor pemajuan 0,26 - 0,55 - 1 kW, osilasi sabuk dan peniupan sabuk pneumatik, penopang rangka, sasis Todpfoxq Ehxsx Aaiob

Kondisi: baru, Tahun pembuatan: 2026, The CORMAK WS20 Bench Drill is a professional column drill press for metal, engineered for drilling and tapping in industrial environments. Thanks to a robust construction, large spindle travel, and automatic tapping function, this machine delivers excellent performance and precision when machining metals, especially structural steel. Key advantages of the machine: - Tapping function with automatic left-hand rotation engagement – fast and safe threading up to M16 in steel. - High structural rigidity – the 85 mm diameter column, along with precision-machined, seasoned cast iron headstock, base, and table ensure stability and vibration dampening. - 135 mm spindle travel – enables deep drilling without the need to reposition the workpiece. - Belt drive – five precisely matched spindle speeds in the range of 280–1875 rpm. - Safety guards with limit switches – CE compliant, increased operator safety. - Large worktable with 360° rotation and T-slots – flexibility for clamping a variety of workpieces. Design and technology: The CORMAK WS20 bench drill for metal is based on a construction made from high-grade materials. The spindle and transmission shafts are manufactured from hardened steel, ensuring wear resistance. The headstock, column, and table are made from precisely machined, seasoned castings, contributing to the overall rigidity of the system. The Morse taper MK2 allows for quick tool changes and use of various machining tools. Precision and work efficiency: Thanks to the rigid column, long spindle travel, and optimised transmission, the machine provides accurate and repeatable drilling and tapping. The user-friendly control panel facilitates operation, while the powerful 1.1 kW motor enables efficient work even in hard-to-machine materials. Applications: The CORMAK WS20 column drill is ideal for use in: - Industrial workshops, - Mechanical repair shops, - Maintenance departments, - Technical schools and training centres. The machine is designed for drilling and tapping in steel, aluminium, and non-ferrous metals. Standard equipment: - Drill chuck with key - Morse taper drift - U-type spindle guard with safety switch - Belt drive guard with limit switch Technical specifications: | Parameter | Value | |-----|-----| | Max. drilling diameter (steel) | 20 mm | | Max. tapping diameter (steel) | M16 | | Spindle travel | 135 mm | | Spindle taper | MK2 | | Spindle speed range | 280–1875 rpm | | Number of speeds | 5 | | Column diameter | 85 mm | | Column wall thickness | 12.7 mm | | Spindle–column distance | 260 mm | | Spindle–table distance | 366 mm | | Spindle–base distance | 678 mm | | Table dimensions | 300 × 320 mm | | Base dimensions | 376 × 566 mm | | Motor power | 1.1 kW | | Power supply | 400 V | | Net weight | 179 kg | Tsdpfx Asrif Treaisb | Machine dimensions | 800 × 450 × 1250 mm |

Kondisi: baru, Tahun pembuatan: 2025, Bending machine ZGR-1400/2.0 without rotary shear - Maximum working length: 1400 mm - Maximum sheet steel thickness: 2.0 mm Tedpfxsb H Afdo Aaijb - Bending beam: 24 mm - Manual machine weight: approx. 190 kg - Upper beam can be lifted in three positions - Maximum clear opening between beams: 80 mm - Bending angle: 145 degrees - Delivery: 180 Euros - Rotary shear available for an additional 350 Euros We look forward to your inquiry!