Mesin bubut tengah
Weiler Condor B

Name: Weiler Condor B
Brand: Weiler
Price: 20500 EUR
Availability: InStock

VB ditambah PPN

€20.500

Tahun pembuatan

1991

Kondisi

Bekas

Lokasi

Ubstadt-Weiher Jerman

Tampilkan peta

Data mesin

Nama mesin:: Mesin bubut tengah

Pabrikan:: Weiler

Model:: Condor B

Tahun pembuatan:: 1991

Kondisi:: sangat baik (bekas)

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

VB ditambah PPN

€20.500

Lokasi:: Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A19778285

Pembaruan:: terakhir pada 06.11.2025

Deskripsi

Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop!

Technical Data:

>> Machine No.: 91-1814, Year of manufacture: 1991
>> Centre height: 165 mm
>> Centre distance: 750 mm
>> Spindle speeds: from 22 to 2800 rpm
>> Spindle bore: 40 mm
>> Short taper spindle nose, DIN 55027, size 5 with bayonet lock
>> Tailstock: Morse taper 3
>> Feeds: from 0.015 to 0.46 mm/rev
>> Thread types possible: metric, imperial, module, and diametral pitch
>> Metric thread pitches: 0.18 to 28 mm
>> Weight: approx. 1,100 kg
>> Spindle brake, selectable
Nkjdjw Nw Dqspfx Ahweu
>> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m

Accessories and Equipment:
>> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual
Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc.
>> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws
>> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws
>> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments
>> Multifix toolpost size B with 2 tool holders
>> Bed stop
>> Electronic spindle guard
>> Rear guard
>> Fixed steady
>> Machine feet

Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake

About the Machine:

Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2007

93 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7251 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Ubstadt-Weiher

11.191 km

Mesin bubut pusat
WeilerCondor B

€18.500

VB ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B – Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout, from Training Workshop Technical Data: >> Year of manufacture: 1991 Machine no.: 91-1624 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitches: 0.18 to 28 mm >> Spindle brake >> Weight: approx. 1100 kg Nsdpfx Aeym Srqshwoku >> Spindle brake engageable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories & Equipment: >> 3-axis Heidenhain digital readout >> 1 pcs 3-jaw wedge-type scroll chuck with 1 set of jaws >> Toolholder with 7 tool pockets >> Bed stop >> Machine feet >> Drill chuck >> Live centre >> Coolant system About the machine: Offered for sale is a used Weiler Condor B lathe, year 1991, in very good condition. The machine is, of course, fully functional; a very robust and high-performance machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very operator-friendly. Take the opportunity to view and test the machine under power at our facility.

Lihat detail

Iklan kecil

Mesin bubut konvensional - Basic 170 Super Knuth Basic 170 Super

Wasbek

10.999 km

Mesin bubut konvensional - Basic 170 Super
KnuthBasic 170 Super

Hubungi

Kondisi: baru, The Basic 170 Super is a powerful conventional lathe from the product group of mechanic lathes. This machine is ideally suited for single-part production and, thanks to its extensive range of accessories, offers optimal application possibilities in repair, training, and workshops of all types. Technical highlights include a maximum spindle speed of 2,000 rpm and a robust grey cast iron bed featuring double prism guides to ensure precise results. The safety interlock ensures that the leadscrew and feedscrew cannot be engaged simultaneously, while all guides are adjustable, increasing both longevity and efficiency. The Basic 170 Super also impresses with its compact construction, minimizing the required footprint, and includes a 3-axis position display with linear scales for easy operation. You can now order your conventional lathe to elevate your production to the next level. Nkedpfx Aoxb R Avshwsu

Lihat detail

Iklan kecil

Ubstadt-Weiher

11.191 km

Mesin bubut pusat
WeilerCondor B

€18.500

VB ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis Heidenhain digital readout from a training workshop Technical Data: >> Year of manufacture: 1990 Machine no.: 90-1419 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Spindle brake >> Weight: approx. 1,100 kg >> Spindle brake can be engaged >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with wedge bars and 1 set of jaws >> Toolholder with 7 tool pockets Nkodeym Dczepfx Ahwsu >> Bed stop >> Machine feet >> Drill chuck >> Revolving centre >> Coolant system About the Machine: For sale is a used Weiler Condor B lathe, year 1990, in very good condition. The machine is, of course, fully operational. It is a very robust and powerful machine. Coming from a training workshop, the Weiler has been well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and test the machine under power at our facility.

Lihat detail

Iklan kecil

Weilheim an der Teck

11.136 km

Mesin bubut pusat
WEILERCONDOR B

€11.900

FCA VB ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1324, lubang spindel: 42 mm, panjang total: 2.000 mm, lebar total: 1.000 mm, tinggi total: 1.800 mm, kecepatan spindel (maks.): 2.800 rpm, kecepatan spindel (min.): 22 rpm, berat keseluruhan: 1.500 kg, WEILER CONDOR B Mesin Bubut Poros Ulir dan Poros Penarik - Tegangan operasi: 380 V - Tegangan kontrol: 220 V - Daya terpasang: 3 kW - Arus nominal: 25 A - Frekuensi: 50 Hz - Jarak antara pusat: sekitar 700 mm - Tinggi pusat di atas alas: 170 mm - Diameter putar di atas alas: 340 mm - Tinggi pusat di atas penyangga: 100 mm - Diameter putar di atas penyangga: 200 mm Nkodpfx Aheyiztiewju Mesin dilengkapi dengan kepala lepas, dudukan pahat Multifix tipe B, serta chuck tiga rahang merek RÖHM diameter 150 mm, juga indikator digital merek ELESTA tipe VISULESTA 4. Termasuk lemari laci bengkel yang sesuai dengan perlengkapan pendukung mesin. FCA D-73235 Weilheim Teck – dimuat ke atas truk

Lihat detail

Iklan kecil

Derek gantry Derek kanopi Derek hall Derek Demag diverse Laengen! bitte Anfragen KBK 2 II KBK2 125 250 500 1000KG

Jerman

11.150 km

Derek gantry Derek kanopi Derek hall Derek
Demag diverse Laengen! bitte AnfragenKBK 2 II KBK2 125 250 500 1000KG

Hubungi

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: MBxx-25, DEMAG KBK 2 - Crane Ceiling Runway Bridge Crane We will assemble your crane runway to the required dimensions – please inquire! Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg Technical specifications of the system: Profile: Demag KBK 1, 2L, 2 rails Also available as a monorail system with curved sections, turntables, and switches! Mounting height variable Njdpfjwq A Avsx Ahwjku System can be supplied complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, cable trolleys, brackets/hangers, etc. All sizes of chain hoists optionally available Various systems available. Very good used condition Rails available in yellow or red! Shipping by freight forwarder possible, collection preferred Demag KBK1, KBK2 and KBK3 rails are in stock!

Lihat detail

Iklan kecil

Hessisch Lichtenau

11.072 km

Mesin bubut tengah
WEILERCondor 81 B

€12.700

EXW harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross-slide: Ø 180 mm Centre height over cross-slide: 90 mm Spindle bore: Ø 40 mm Nkjdpsvadqzofx Ahwju Tailstock taper: MT 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment & accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick clamping unit and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost, size B - LED work lamp - Bed stop - Automatic longitudinal and facing feeds - Electro-mechanical spindle brake, switchable - 2x Emergency stop - Electronic chuck key interlock (via sleeve with switch) - Coolant tank with pump integrated in machine base - Hinged chuck guard - Splash guard panel - Circuit diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very user-friendly and robust. The machine can be demonstrated under power on site. All information is without guarantee. Subject to prior sale.

Lihat detail

Iklan kecil

Kaufungen

11.078 km

Mesin bubut tengah
WeilerCondor B

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1992, 1 unit mesin bubut ulir bekas Merek: Weiler Tipe: Condor B Tahun pembuatan: 1992 Spesifikasi teknis: Jarak antara senter: 750 mm Tinggi center: 165 mm Diameter lubang spindle: 40 mm Putaran: 22 – 2800 rpm Tailstock: MK 3 Daya penggerak: 1,6 / 3,2 KW Nkjdew Rcd Sspfx Ahwju Berat: 1040 kg Dimensi: 1.850 x 880 x 1.290 mm Dilengkapi dengan: Pembaca digital 3 sumbu Chuck 3 rahang Pelindung chuck

Lihat detail

Iklan kecil

Bubut tengah dan bubut spindel COLCHESTER MASTER VS 3250

Witten

11.228 km

Bubut tengah dan bubut spindel
COLCHESTERMASTER VS 3250

Hubungi

Kondisi: baru, Tahun pembuatan: 2024, Swing diameter over bed: 350 mm Swing diameter over cross slide: 196 mm Turning length: 650 mm Nksdpfx Aswp Tpkohwju Center height: 170 mm Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis ACU-RITE digital readout including constant cutting speed and traversable over the entire bed length, MULTIFIX quick-change toolpost, size MB * For more information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Lihat detail

Iklan kecil

Langwedel

11.072 km

Mesin bubut tengah
WeilerCondor 81B

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1988, Weiler lathe Model: Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Nedpfxevgmbvj Ahweku Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock Morse taper: MK 3 Coolant pump (not connected) Work light automatic longitudinal and cross feed Spindle brake - Hinged chuck guard - Splash guard Weight approx. 1,040 kg 3-jaw chuck Multifix B quick-change tool post Live centre

Lihat detail

Iklan kecil

Feucht

11.001 km

Mesin bubut tengah
WEILERCondor B

Hubungi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Universal lead and feed screw lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted in RAL 7035 light grey Machine no.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new Nkodpfeg R S Rcsx Ahweu - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip guard/rear splash guard - Operating manual - Used, as seen -

Lihat detail

Iklan kecil

Mesin untuk deburring elektrokimia EXTRUDE HONE (KENNAMETAL) ECLINE

Kunovice

10.557 km

Mesin untuk deburring elektrokimia
EXTRUDE HONE (KENNAMETAL)ECLINE

Hubungi

Iklan kecil

Mesin bubut tengah Weiler Condor B CE Konform

Ubstadt-Weiher

11.191 km

Mesin bubut tengah
WeilerCondor B CE Konform

€22.500

VB ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet Nedpfx Aoxcuazehwsku For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Lihat detail

Iklan kecil

Mesin bubut tengah WEILER Condor B - Teilüberholt

Ubstadt-Weiher

11.192 km

Mesin bubut tengah
WEILERCondor B - Teilüberholt

€23.000

VB ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 165 mm, lebar di tengah: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and an excellent ratio of footprint to center height/center distance. The Condor B is positioned in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder in any workshop. The machine undergoes a comprehensive partial overhaul in our workshop, ensuring both excellent technical condition and visual appearance. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site to verify its condition. Availability: On request Centre height: 165mm Nsdpfjw N Np Sjx Ahweku Centre distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MT3 Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Spindle speeds: 22-2800 rpm Possible thread types: Metric, Whitworth, Module, Diametral Pitch Metric thread pitches: 0.18 - 28mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more available upon request… Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are at least workshop-inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the selected machine in your desired color - Upon request, you can order additional accessories such as tools - Upon request, we can fit additional accessories such as safety devices - We are happy to arrange shipping and/or installation

Lihat detail

Iklan kecil

Velen

11.246 km

Menekan mesin
DUMETAD-BD-M16

Hubungi

Kondisi: baru, Thread diameter: M3 – M16 mm Infinitely variable speed, max. 187 rpm Working range: 180 – 1000 mm Motor power: 0.7 kW Weight: 22 kg Electric tapping machines for threads M3 – M16, adjustable angle. Includes 9 quick-change chucks with slip clutch. Settings via display: - Variable speed - Adjustable depth Nkedpfx Ahod Iinmswsu - Material selection - Selection of main rotation direction - Thread selection Options: - Clamping table with T-slots: 990 x 700 x 800 mm - Magnetic base. Also available for: M14 to M24 and M27 to M33.

Lihat detail

Beriklan di sini

Mesin bubut tengahWeiler Condor B

Data mesin

Harga & Lokasi

Rincian penawaran

Deskripsi

Penyedia

Kirim permintaan

Telepon & Faks

Mesin bubut tengah
Weiler Condor B