Aksesori mesin bubut, bangku bubut

Weiler Primus

Kondisi: sangat baik (bekas), WEILER PRIMUS Tipe MD-G - Ketinggian senter: 125 mm - Jarak antara senter: 400 mm - Rentang kecepatan putar: 40–3000 rpm - Lubang spindle: 24 mm - Pelindung chuck elektrik - Multifix dengan sisipan - Tailstock dengan pinol bor - Chuck empat rahang - Lampu kerja - Pembatas ranjang Iedpfx Afjxw H Dbocjbd - Dokumentasi Dimensi: P x L x T: 1,3 x 0,8 x 1,6 meter / Berat: 450 kg Kesalahan dan kekeliruan informasi dapat terjadi.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Ibedpfx Aju Afqlofced Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 – 3,000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 2-axis Heidenhain digital readout >> 1 new 125 mm three-jaw chuck with 2 sets of jaws >> New collet chuck system with collets (new), range 3 mm to 25 mm in 1 mm increments >> Multifix size A quick-change toolpost with 3 tool holders >> Rear splash guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides operate very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and enables you to achieve ground-like finishes. Take the opportunity to view and test this machine under power on site to convince yourself of its condition.

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B Iedpfsrtd Uwjx Afcebd - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, For sale: Lathe manufactured by Weiler, model Primus LZ-GS The machine is in very good condition. Technical specifications: - Year of manufacture: 1989 - Machine No.: 4443 - Operating voltage: 380 V - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 gear steps - Spindle bore: 23 mm - Short taper spindle nose DIN 55027 - Tailstock Morse taper 2 - Feed rates: 0.03 to 0.15 mm/rev - Thread cutting: Metric, imperial, module, and diametral pitch - Metric thread pitch: 0.25 to 2.5 mm - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Prices plus VAT Inspection possible by appointment. Please contact us—our team is pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Isdpfxsihig Ij Afcobd Are you looking for a high-quality yet affordable metalworking machine for your production facility, or do you want to sell yours? For more information or contact options, visit our website.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Ibodpfsu Aftgjx Afced >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg Isdpfovtp Edex Afcsbd >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe in Excellent Original Condition!!! Technical Data: >> Year of manufacture: approx. 1992, Machine No. 4549 Ijdjwkh Abepfx Afcjbd >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> New collet attachment, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: This offer is for a Weiler Primus GS lead and feed screw lathe in excellent original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in top condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Ibjdpfxjvkfhpe Afced Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 Ibjdpevivmyefx Afced >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard About the machine: Ibjdpfew Idllox Afcsd Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.